Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Qualified successfully |
| 2 | Accepted-Technical | Accepted-Technical Qualified successfully |
| 3 | Accepted-Technical | Accepted-Technical Qualified successfully |
| 4 | Accepted-Technical | Accepted-Technical Qualified successfully |
| 5 | Not Admitted-Fee/PreQual/Technical UDHAMPUR | Not Admitted-Fee/PreQual/Technical Others-Non submission of original demand draft in this office as per the general guidelines mentioned in SBD |
Tender Value
₹51.1 L
EMD Value
₹1.0 L
Closing Date
1 Jan 2026, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Electric Division, Kathua
Office of the XEN, Electric Division, Kathua
Creation of 100KVA, 25KVA S-Stns, Shifting of 63KVA S-Stn, Shifting of HT Line on 9Mtr STPoles i.r.o JPDCL ESD Billawar and Creation of 04Nos. 25KVA S-Stns in respect of ESD Ramkot of ED Kathua under CDS on Turnkey Basis
2025_PDD_298348_1
KED/36 of 2025-26 Dated 16.12.2025
Open Tender
Electrical Works
Turn-key
45 days
Sub Division Billawar and Ramkot
Please read tender documents and SBD
4 documents required · 4 mandatory
₹2,000
Yes
Executive Engineer, Electric Division, Kathua
₹1.0 L
Yes
Office of the XEN, Electric Division, Kathua
10 Jan 2026
16 Dec 2025
3 Jan 2026
16 Dec 2025
1 Jan 2026
16 Dec 2025
16 Dec 2025 - 29 Dec 2025
29 Dec 2025
Locations of Sub Stations/Shifting to be executed alongwith HT/LT Line: 1. Shifting of HT Line on 9Mtr ST Poles near the shop of Sudesh Gupta (Phinter) (Sub Division Billawar) 2. 100KVA Sub Station at Ward No.03 Phinter on PCC Poles (Sub Division Billawar) 3. Shifting of 63KVA S/Stn. near Trimbli Mohalla (Sub Division Billawar) 4. 25KVA S/Stn. at Tali Mohalla (Sub Division Billawar) 5. 25KVA S/Stn. at SC Mohalla W.No.3 Kotla (Sub Division Ramkot) 6. 25KVA S/Stn. at SC Mohalla W.No.5 Kohag (Sub Division Ramkot) 7. 25KVA S/Stn. at Galak (Sub Division Ramkot) 8. 25KVA S/Stn. at Bhai Gurah (Sub Division Ramkot)
Shifting of HT line on 9 Mtr ST poles near the shop of Sudesh Gupta Ji Phinter in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua
9 Mtr. Long pole (ST-410 SP 33)
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
PG Clamps for ACSR weasel conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Anti Climbing Devices with clamps
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Red oxide Paint
Aluminium Paints
Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Shifting of HT line on 9 Mtr PCC poles near the shop of Sudesh Gupta Ji Phinter in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua
9 Mtr. Long Pole(WL-300 Kg )
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
PG Clamps for ACSR weasel conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Creation of 100KVA Sub Station alongwith HT/LT Line at Ward No.03 Phinter in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua
100 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2 ( new), IS1180 part -1, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings.(Aluminium Wound upto 200 KVA, Copper Wound for 250 KVA or Higher KVA rattings.)
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
185 mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (PCC WL -300 KG)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps.
Galvanized Nuts and Bolts.
Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lightening Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Wedge connectors /PG clamps
Danger plate with clamps
GI Barbed wire for ani Clambing
3 Ph 4 Wire Trivector meter with CT
Sundary items like Aluminium Lugs, Jumpers , binding tape
Laying of HT line on 9 Mtrs. PCC poles at Ward No.03 Phinter in respect of JPDCL Electric Sub Division Billawar
9 Mtr. Long Pole(WL-300 Kg )
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Laying of LT line on 8 Mtrs. PCC poles at Ward No.03 Phinter in respect of JPDCL Electric Sub Division Billawar
8 Mtr. Long Pole(WL-200 Kg )
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Shifting of 63KVA Transformer at Trimbli Mohalla on ST poles in respect of JPDCL Electric Sub Division Billawar
63 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2 ( new), IS1180 part -1, 2014 as per latest upto date amendment with externally fitted MCCB with cable box and 4x4 mtrs. Suitable cable of ratings.(Aluminium Wound upto 200 KVA, Copper Wound for 250 KVA or Higher KVA rattings.)
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
50 mm² (2 Ckt) Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (ST-410 SP 33)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
30 mm² ACSR Weasel Conductor
GI Channel/Angle/Flat of sizes including clamps.
Galvanized Nuts and Bolts.
Earthing of substation -Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lightening Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Wedge connectors /PG clamps
Danger plate with clamps
GI Barbed wire for ani Clambing
3 Ph 4 Wire Trivector meter with CT
Red oxide Paint
Aluminium Paints
Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole
Sundary items like Aluminium Lugs, Jumpers , binding tape
Laying of HT line on 9Mtrs. ST poles at Trimbli Mohalla on ST poles in respect of JPDCL Electric Sub Division Billawar
9 Mtr. Long pole (ST-410 SP 33)
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
PG Clamps for ACSR weasel conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Anti Climbing Devices with clamps
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Red oxide Paint
Aluminium Paints
Cement Bottoming 1:2:4 mix as per REC Standrad 0.5 CUM per pole
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8Mtrs. ST poles at Trimbli Mohalla on ST poles in respect of JPDCL Electric Sub Division Billawar
8Mtr. Long pole (ST-410 SP 15)
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Anti climbing Devices with Clamp
Earthing Complete bu GI Pipe 40mm or GI rod 20 mm 2.5 Mtr long through GI Strip
Red Oxide Paint
Al Paint
Cement bottomiing 1:2:4 mix as per REC standerds .45 Cum/pole
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Creation of 25KVA Sub Station alongwith HT/LT Line at Tali Mohalla in respect of JPDCL Electric Sub Division Billawar of Electric Division Kathua
25 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2( new), IS1180 part -1, 2014 as per latest upto date amendment
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
25 mm² Single core cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (ST-410 SP 33)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvanized Nuts and Bolts.
32/63 Amps TPN switch Disconnector fuse unit
Cement bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
LT Distribution Box for 16 KV DTR with MCCB for incommer and SFU's for out going Circuits
Laying of HT line on 9 Mtrs. ST poles at Tali Mohalla in respect of JPDCL Electric Sub Division Billawar
9 Mtr. Long pole (ST-410 SP 33)
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
PG Clamps for ACSR weasel conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Red oxide Paint
Aluminium Paints
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8 Mtrs. ST poles at Tali Mohalla in respect of JPDCL Electric Sub Division Billawar
8Mtr. Long pole (ST-410 SP 15)
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Red Oxide Paint
Al Paint
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Creation of 25KVA Sub Station alongwith HT/LT Line at SC Mohalla W.No.3 Kotla in respect of Sub Division Ramkot of Electric Division Kathua
25 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2( new), IS1180 part -1, 2014 as per latest upto date amendment
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
25 mm² Single core cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (ST-410 SP 33)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvanized Nuts and Bolts.
32/63 Amps TPN switch Disconnector fuse unit
Cement bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
LT Distribution Box for 16 KV DTR with MCCB for incommer and SFU's for out going Circuits
Laying of HT line on 9 Mtrs. ST poles at SC Mohalla W.No.3 Kotla in respect of Sub Division Ramkot
9 Mtr. Long pole (ST-410 SP 33)
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Red oxide Paint
Aluminium Paints
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8 Mtrs. ST poles at SC Mohalla W.No.3 Kotla in respect of Sub Division Ramkot
8Mtr. Long pole (ST-410 SP 15)
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Red Oxide Paint
Al Paint
Creation of 25KVA Sub Station alongwith HT/LT Line at SC Mohalla W.No.5 Kohag in respect of Sub Division Ramkot of Electric Division Kathua
25 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2( new), IS1180 part -1, 2014 as per latest upto date amendment
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
25 mm² Single core cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (ST-410 SP 33)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvanized Nuts and Bolts.
32/63 Amps TPN switch Disconnector fuse unit
Cement bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
LT Distribution Box for 16 KV DTR with MCCB for incommer and SFU's for out going Circuits
Laying of HT line on 9 Mtrs. ST poles at SC Mohalla W.No.5 Kohag in respect of Sub Division Ramkot
9 Mtr. Long pole (ST-410 SP 33)
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Red oxide Paint
Aluminium Paints
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8 Mtrs. ST poles at SC Mohalla W.No.5 Kohag in respect of Sub Division Ramkot
8Mtr. Long pole (ST-410 SP 15)
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Red Oxide Paint
Al Paint
Creation of 25KVA Sub Station alongwith HT/LT Line at Galak in respect of Sub Division Ramkot of Electric Division Kathua
25 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2( new), IS1180 part -1, 2014 as per latest upto date amendment
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
25 mm² Single core cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (PCC WL 300 KG)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvanized Nuts and Bolts.
32/63 Amps TPN switch Disconnector fuse unit
Cement bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
LT Distribution Box for 16 KV DTR with MCCB for incommer and SFU's for out going Circuits
Laying of HT line on 9 Mtrs. PCC poles at Galak in respect of Sub Division Ramkot
9 Mtr. Long Pole(WL-300 Kg )
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8 Mtrs. PCC poles at Galak in respect of Sub Division Ramkot
8 Mtr. Long Pole(WL-200 Kg )
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Creation of 25KVA Sub Station alongwith HT/LT Line at Bhai Gurah in respect of Sub Division Ramkot of Electric Division Kathua
25 KVA, 11/0.433-0.250KV;50 Hz, Al wound Distribution Transformer of latest Energy efficiency level-2( new), IS1180 part -1, 2014 as per latest upto date amendment
Gapless Surge Arrestor,9 KV ,10 KA ,LA with polymer housing, Stn. Type
11KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 KV Horn Gap Fuse Set 3 Phase 200A
25 mm² Single core cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type.
9 Mtr. Long pole (PCC WL 300 KG)
11KV Polymeric composite Disc Insulator 12KV,min failing load 45KN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvanized Nuts and Bolts.
32/63 Amps TPN switch Disconnector fuse unit
Cement bottomiing 1:2:4 mix as per REC standerds .5 Cum/pole
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
LT Distribution Box for 16 KV DTR with MCCB for incommer and SFU's for out going Circuits
Laying of HT line on 9 Mtrs. PCC poles at Bhai Gurah in respect of Sub Division Ramkot
9 Mtr. Long Pole(WL-300 Kg )
GI V cross-arm with top Bracket including clamp
GI Channel x-arm includingclaps and braces
30 mm² ACSR Weasel Conductor
11KV Polymeric composite Pin Insulator 12KV, 5kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
11KV Polymeric composite Disc Insulator 12KV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm
Galvanized Nuts and Bolts
Danger Plates with Clamp
Earthing Complete by GI Pipe 40mm dia or GI Rod 20mm ,2.5 mtrs long through GI Strip
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Laying of LT line on 8 Mtrs. PCC poles at Bhai Gurah in respect of Sub Division Ramkot
8 Mtr. Long Pole(WL-200 Kg )
GI U-Clamp for Shackle insulators
16 KN Shackle insulators
30 mm² ACSR Weasel Conductor
Galvanized Nuts and Bolts
Danger Plates with Clamp
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.19 MB
SBD36.pdf
Tender Documents • 1.40 MB
BOQ_967077.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .