Loading…
Loading…
Tender Value
₹35.0 L
EMD Value
₹70,000
Closing Date
11 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
Above/Below/Par
SIGNAL
32 conditions · 15 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
Provision of Standard tool kit for maintenance staff (Signal) over Firozpur division.
433-Sig-T-05-26-27
433-Sig-T-05-26-27
Open
Works - General
3 Months
Firozpur, Punjab
₹0
₹70,000
11 May 2026
17 Apr 2026
27 Apr 2026
7 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 34,99,323.9 | ||
| — | 150.00 | — | — | ||
| Supply of Maintenance Tool kit : Each kit consists of item Nos. 1 to 19 as per list below: - i) Spanner D/E 30x32 mm =1 No., (ii) Spanner D/E 18x19 mm =1 No. (iii) Spanner combination Ring and open end 19 mm = 1 No. (iv) Spanner open end 50 mm = 2 Nos. (v) Spanner combination ring & open end 30 mm = 01 No. (vi) Spanner combination ring & open end 40 mm = 02 No. (vii) handle extension = 01 No. (viii) lead Seal=50 Nos (ix) Box Spanner 30 & 19 mm = 01 Nos. (x) Cutter cum stripper 4" = 01 No. (xi) Screw driver set 6" = 01 No. (xii) Adjustable wrench 375 mm = 01 No. (xiii) Hammer ball 1.5 lb = 01 Nos. (xiv) Brown Tape = 01 No. (xv) flexible wire - 10 Mtrs. (xvi) Permanent Marker black & white - 01 No's (xvii) Soldering iron & wire- 01 No's (xviii) Seal Plier=01 No's, (xvix) Tool kit bag=01 No's (Inspection: RITES) | — | — | — | 17,75,379 | |
| — | 150.00 | — | — | ||
| Supply of Portable digital auto range multi-meter clamp type make of Philips, Motwani, Fluke, Rishabh or better make capable to measure from (0.1mv/0.01ma) AC/DC upto 50Amp(AC/DC), 600V(AC/DC) and 0.1 ohms- 40M ohms suitable for measurement of Freq., capacitance complete with Manual, leads, battery and holster etc. (Inspection: RITES) | — | — | — | 12,81,730.5 | |
| — | 2.00 | — | — | ||
| Supply of traction Power Battery bank as per the following specifications below. Each cell of 2 Volts and 470AH with tubular positive and pasted negative plates assembled in Heat sealed PPCP Container cover housed in acid resistant painted steel tray with connector, cable and socket in charged condition with Auto fill system or similar. Battery type- 48V 470 AH ("Weld On" type), Type: 8MlPzB470, Dim. 1000L x 700W x 470/n30H (mm) T.5mm. Batteries are manufactured with Fresh Lead and will be a newly manufactured battery. Battery will be supplied with Connector and cables and there will be no extra cost for Cables and Connectors. The batteries are required for Fork Lifter of Make Godrej & Boyce Mfg. Co. Ltd. Model: GX 150 E and should be compatible with this model. Make-Exide/Amaron/or any reputed brand. Warranty: Minimum 30 Months. (Inspection: Consignee) | — | — | — | 4,42,214.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalGCC-2022-uptoACS6.pdf
ATTACHMENT
IRGCC2022ACS7.pdf
ATTACHMENT
IRGCC2022ACS8.pdf
ATTACHMENT
IRGCC2022ACS9.pdf
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
StandardTenderDocument2022.pdf STD 2022
ATTACHMENT
correctionslip1toSTD2022.pdf
ATTACHMENT
Specialconditionsofwork.pdf
ATTACHMENT
IRGCC2022ACS11.pdf
ATTACHMENT
StandardTenderDocument2022.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .