Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹11.5 Cr
EMD Value
₹11.5 L
Closing Date
3 Oct 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Market Complex, Renovation and Beautification of Nilakantha Sagar lake and Smart Park at Jeypore, Koraput, Odisha.
NBCC/ODISHA/ZO/JEYPORE/22-23/71
NBCC/ODISHA/ZO/JEYPORE/22-23/71
Open Tender-Domestic
Civil Works General
Koraput, Odisha
₹11,800
₹11.5 L
3 Oct 2022
19 Sept 2022
3 Oct 2022
3 Oct 2022
19 Oct 2022
SL NO. DESCRIPTION TOTAL AMOUNT
SL NO. DESCRIPTION TOTAL AMOUNT
A CONSTRUCTION OF MARKET COMPLEX BUILDING 17224542.76
RENOVATION AND BEAUTIFICATION OF NILAKANTHA
C RENOVATION AND BEAUTIFICATION OF SMART PARK 9148577.78
TOTAL PRIME COST (A+B+C) 114862386.18
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
MARKET COMPLEX BUILDING, JEYPORE, KORAPUT, ODISHA.
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
1a. MARKET COMPLEX BUILDING
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Filling foundation and plinth with excavated Earth inluding
watering and ramming
Supplying & filling foundation and plinth with sand well
3 watered and rammed including cost, cost of all labour, CUM 226.99 897.79 203792.72
carriage, royalty, taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
4 hoisting laying using concrete mixture and vibrators including CUM 176.03 5427.18 955330.92
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Footing & Pedestal CUM 71.44 5986.96 427720.40
* Column (UP to Plinth Beam) CUM 7.88 13971.78 110027.74
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) & Roof Beam CUM 45.80 13971.78 639933.54
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
12 scafolding, curing etc. complete all Depth, height for outside SQM 429.88 229.61 98704.68
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
14 watering, curing cost, carriage, royalty, and taxes of all SQM 711.27 177.07 125945.12
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
making smooth to recive painting including cost of scaffolding
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints
17 over two coats of wall putty punning to the inside surface of SQM 2452.05 86.58 212288.90
walls including, all cost of materials, labour, T&P, etc.
Providing & painting two coats with Weather coa paints over
18 two coats of wall putty punning to the inside surface of walls SQM 429.88 80.30 34521.08
including, all cost of materials, labour, T&P, etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
19 mixed with pigment to match the shades of the tiles including SQM 434.17 2691.36 1168507.77
rubbing and polishing complete including cost, carriage,
royalty & taxes of all material, cost of all labour T&P etc.
Fixing granite tile in dados skirting and risers of steps on
12mm thick cement plaster (1:3) jointed with neat cement
20 slurry mixed with pigments to match the shade of the tiles SQM 98.04 2301.04 225593.96
including rubbing and polishing complete including all costs
Fixing glazzed tiles (30cmx30cm / 40cm x 40cm special
plain/printed series ceramic tiles of premium grade having
thickness 7 mm to 8mm confirming to IS 13755) in floors
21 treads or steps and landing on 20 mm thick bed of cement SQM 26.70 915.15 24434.56
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
mixed with pigment to match the shades of the tiles including
Fixing glazzed tiles (20cmx30cm / 20cm x 20cm special
plain/printed series ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS 13753) in dados
22 skirting and risers of steps on 12mm thick cement plaster (1:3) SQM 124.95 1228.86 153546.56
jointed with neat cement slurry mixed with pigments to match
the shades of the tiles including cost of tiles.
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including
cost, conveyance, royalty and taxes of all materials,hire
charges of drilling machine and cost of all labour T&P required
for the work complete in all respect as per direciton of the
Engineer-in-charge.
Supplying and fixing rolling shutters of approved make, made
of required size M.S. laths, interlocked together through their
entire length and jointed together at the end by end locks,
mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with
24 push and pull operation complete, including the cost of SQM 208.00 2601.94 541203.66
providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 - part 1 and M.S. top cover of required
thickness for rolling shutters. (80x1.25 mm M.S. laths with
1.25 mm thick top cover)
Painting with Enamel paint of approved quality and shade over
surface with 2 coats over 1 coat of primer etc.
P/F 60 mm thick factory made C.C interlocking paver Block of
26 M-30 grade made by block making machine over and i/c 50 SQM 100.00 1111.94 111193.60
mm thick bed of C. sand, filling the joints.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) & Roof Beam CUM 11.15 15691.87 174885.91
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
4 scafolding, curing etc. complete all Depth, height for outside CUM 208.08 241.92 50338.71
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
6 watering, curing cost, carriage, royalty, and taxes of all SQM 42.60 181.10 7715.03
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
making smooth to recive painting including cost of scaffolding
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints
9 over two coats of wall putty punning to the inside surface of SQM 242.04 88.26 21361.48
walls including, all cost of materials, labour, T&P, etc.
Providing & painting two coats with Weather coa paints over
10 two coats of wall putty punning to the inside surface of walls SQM 208.08 82.99 17268.98
including, all cost of materials, labour, T&P, etc.
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
11 mixed with pigment to match the shades of the tiles including SQM 8.40 2691.36 22607.42
rubbing and polishing complete including cost, carriage,
royalty & taxes of all material, cost of all labour T&P etc.
Fixing granite tile in dados skirting and risers of steps on
12mm thick cement plaster (1:3) jointed with neat cement
12 slurry mixed with pigments to match the shade of the tiles SQM 1.74 2301.04 4003.81
including rubbing and polishing complete including all costs
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including
cost, conveyance, royalty and taxes of all materials,hire
charges of drilling machine and cost of all labour T&P required
for the work complete in all respect as per direciton of the
Engineer-in-charge.
Supplying, fitting, fixing up window (sliding type) made up
aluminium section 151-154, 151-155,aswindow frame Section
No. 151-155, 151-153 and 151-167 as shutter frame with 5mm
15 thick black glass as pannel fitted with rubber beading including SQM 2.88 6521.87 18782.98
locking arrangement including all fitting including cost of
materials all taxes of labour, T&P etc. complete asper
direction of E.I.C
1c. SEPTIC TANK
Earth work in excavation of all type of soil within 50m initial
lead and 1.m initial lift including rough dressing and breaking
clods to maximum 5cm to 5cm and laying and layers not
exceding 0.3m in depth
Supplying & filling foundation and plinth with sand well
2 watered and rammed including cost, cost of all labour, CUM 40.34 117.49 4739.41
carriage, royalty, taxes, T&P etc complete.
Supplying and laying plain cement concrete 1:3:6 with 40mm
agregates As levelling coarse in foundation and plinth etc.
complete all depth and height. Complete as per direction of
the site-in-charge
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
20mm thick C.P. in C.M.(1:4) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Filling foundation and plinth with excavated Earth inluding
watering and ramming
Supplying & filling foundation and plinth with sand well
watered and rammed including cost, cost of all labour,
carriage, royalty, taxes, T&P etc complete. ( Below Floor
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
4 hoisting laying using concrete mixture and vibrators including CUM 0.82 5427.18 4432.65
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) CUM 0.63 13971.78 8732.36
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
16mm Inner wall plaster of ratio 1:6 including all necessary
10 scafolding, curing etc. complete all Depth, height for outside SQM 27.94 229.61 6415.30
wall as per drawing and Engineering-in-charge
Finishing surface of walls with Cement based wall putty &
making smooth to recive painting including cost of scaffolding
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with Weather coa paints over
14 two coats of wall putty punning to the inside surface of walls SQM 27.94 80.30 2243.69
including, all cost of materials, labour, T&P, etc.
Sipplying and fixing M.S Gate, Door & Window made out with
ms flat, angle of approved design & specification including
cost of all materials, manufacture, and one coat of primer, all
taxes T&P etc complete as per the direction of Engineer-In-
Charge.(Taking 45.00kg for door window & 100kg for
Fixing water closet, squatting pan (Indian type W.C pan)
conforming to IS 2556 : Part 3-2004 duly embedded in cement
concrete (1:4:8) using hard granite metal 4cm nominal size
allcomplete as per specification.
White Glazed vitreous china Squatting pan- long pattern size
Fixing in cement mortar (1:3) a pair of white vitreous china
2 250mm x 130mm x 30mm foot rest for squatting pan water Each 2.00 164.31 328.63
closet as per specification
Fixing Wash Down Water Closet (European type W.C pan)
with integral ‘S’ or ‘P’ trapconforming to IS 2556 : Part 8-2004,
to the floor with wooden plug and chromium plated screws
including jointing the trap with soil pipe in cement mortar (1:1)
etc all complete as per specification. (Seat and cover to be
Providing and fixing P.V.C. low level flushing cistern with
4 manually controlled device (handle lever) conforming to IS : Each 4.00 1666.62 6666.49
7231, with all fittings and fixtures complete.
Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996
including connecting the urinal of430x260x350 mm or
5 340x410x265 mm sizes respectively with waste pipe by Each 2.00 12490.14 24980.28
means of white lead mixed with chopped hemp etc all
complete as per specification.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Fixing PVC automatic flushing cistern including cutting holes
and making good the same all complete as per specification.
Supplying , fitting , fixing of porcelein wash hand basin of size
450mm x 350 mm of CERA make, catalogue no Canon 1012
Wash Basin of Equivalent of Parryware/ Hindware with rog
7 bolts, CI brackets, hole for pillar cock with cast iron/ M.S. Each 2.00 2194.37 4388.74
brackets painted while including cutting holes in wall and
making good to the damages etc. all complete with materials ,
labour and T& P etc.
Supply , fitting , fixing of ( 500 x 450 mm) bevelled edge mirror
of superior glass mounted on 6 mm thk A.C. sheet or ply-
8 wood sheet and fixed to wooden plugs with cromium plated Each 2.00 1090.21 2180.42
brass screws and washers etc. all complete with materials ,
labour and T & P etc.
9 Providing and fixing PVC soil waste and vent pipes 0.00
Supplying fitting , fixing of PVC floor traps of the following
norminal diameter of outlet of self cleaning design with sand
cast iron screwed down or hinged grating with or without vent
arm including cutting holes in walls and making good to the
damages etc. all complete with materials, labour and T& P
11 Providing and fixing PVC plain bend of required degree
Providing and fixing PVC single equal plain junction of
12 required degee with access door, insertion rubber washer
3mm thick, bolts and nuts complete .
Providing and fixing door piece, insertion rubber washer 3mm
thick , bolts & nuts complete .
14 Providing & fixing PVC terminal guard (i) 110 mm Each 10.00 67.20 672.00
Providing and fixing on wall face unplasticised Rigid PVC soil,
waste and rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS: 5382, leaving
10 mm gap for thermal expansion, (i) Single socketed pipes
Supplying, fitting, fixing to walls, ceiling and floor upplasticized
PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2)
16 th efollowing nominal diameter with fittings and clamps
includings testing all complete with materials labour and T & P
a) 15mm dia nominal bore metre 20.00 92.18 1843.52
b) 20mm dia nominal bore metre 10.00 128.13 1281.28
c) 25 mm dia nominal bore metre 8.00 178.86 1430.91
d) 32 mm dia nominal bore metre 15.00 130.59 1958.88
e) 40 mm dia nominal bore. metre 25.00 315.62 7890.40
17 Providing and fioxing brass bib cock of approved quality .
(i) 15 mm nominal bore short body Each 10.00 919.68 9196.81
(ii) 15mm nominal bore long body Each 5.00 1202.99 6014.93
Providing and fixing brass stop cock with wall flush of
approved quality .
(i) 15 mm nominal bore. Each 5.00 769.95 3849.76
Providing and fixing gun metal gate valve with C.I. wheel of
approved qualioty ( screwed end)
(i) 32 mm dia Nominal bore Each 5.00 1264.68 6323.38
20 Sand Cast Iron S&S as per IS: 1729 (Gully Trap) Each 2.00 955.02 1910.05
Supply all labour , materials and T & P and laying to level and
slope and jointing with cement mortar(1:1) for PVC pipes .
21 (Grade-A) of the following diametersas per specification al metre 28.00 1012.90 28361.25
complete (excluding earth work in trenches)(data for 30 mtr.)
(per mtr) S.W. Pipe 150mm dia.
Supplying all materials, labour and T & P for construction of
22 inspection chamber as per P.H. specification and design all Each 2.00 8120.59 16241.18
ocmplete ( per each)
Fixing Rotational moulded polyethylene cylindrical vertical
water storage tanks conforming to IS : 12701--1996 including
cutting holes through the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam nuts, fixing ball
valve etc, including hoisting upto a height of 5 metres above
ground level and placing the tank to the required position etc
all complete as per specification and direction
2000 litre capacity Double Layer Cylinderical Vertical water
storage tanks Each 4.00 22219.49 88877.94
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Labour for drilling a perfectly vertical bore hole of specified dia
for a specified depth below ground level through consolidated
and unconsolidated rock with down the hole hammer drilling
rigs or combination drilling rigs (1200 cfm/ 300 psi) as required
to suit the site condition as per the direction of Engineer-in-
charge including use of own rigs with its accessories, tools
1 and plant and consumables etc for lowering of 200 mm dia Mtr 130.00 1051.79 136732.96
PVC/GI pipes for housing fitted with socket and with or without
well screen as per the necessity for soft, medium, hard and
boulder formation (GI/PVC casing pipes if required to prevent
collapse of over burden is to be provided by the contractor
including lowering and withdrawing after completion of the
Lowering the following size G.I/ PVC pipes with or without
slotted pipes as per the necessity from ground level and fitted
and fixed up in perfectly vertical position, including cutting and
2 threading pipe and slotted pipe and supplying and fixing all
jointing materials, tools and plant etc. complete and keeping
the top of the casing pipe threaded including plugging tube
wells to prevent entry of foreign materials from above.
Labour for lowering of 200 mm dia PVC/GI Casing Pipes 0.00
0 to 45 Mtrs. and above of Lowering Mtr 30.00 265.78 7973.28
Cleaning and developing the tube well using their own
compressor continuously worked till clear and adequate
3 discharge is obtained from the tube well including supply and 0.00
use of all necessary equipment and labour as per the direction
of Engineer-in-Charge.
Labour for developing of tubewell No 1.00 9580.93 9580.93
Supplying all materials and labour, tools and plant and
providing sanitary sealing by cement concrete grouting of
annular space around GI/PVC/MS housing pipe upto 5 mtrs
below ground level (as per drawing) to plug the bore hole
4 excluding cost of cement all complete as per direction of
Engineer in charge. Minimum one metre of casing pipe to be
inserted in the bore into the rock at the bottom to ensure
sanitary sealing (excluding cost of cement which will be
supplied by the Department)
Sanitary sealing upto 5 mtrs below ground level No 1.00 2385.60 2385.60
Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing pipe,
removable as per requirement, all complete for borewell of
Providing and fixing brass full way 100 mm dia valve with C.I.
wheel of approved make, tested to a pressure of 21 kg/sqcm.
Providing and fixing 100 mm dia gunmetal non return valve of
approved make tested 21 kg / sqcm.
Providing and fixing GI pipe (heavy duty) confirming to IS
1239 with special fittings in external works including
8 earthwork, excavation in all kind of soil including refilling, RM 50.00 784.00 39200.00
painting pipes & fitting with two coats of anti corrosive paint
complete and all as directed by Engineer-in-Charge.
9 Providing and filling sand all around GI pipe in external work cum 15.00 1087.52 16312.80
Providing and installing submersible pump suitable for 8"dia
casing of bore with SS impeller, high tensile SS shaft, copper
wound squirrel cage wet type induction motor 2880 rpm, 415
V, 50 Hz, 3 Phase AC supply, conforming to IS: 8034-1976,
capacity 100 litre per minute at 70-120 m head along with
adireclty coupled submersible type squirrel cage electric
induction 12.5 HP motor suitable for operation on 400 V, 3
phase, 50 c.p.s AC supply, water lubricated bearings and
10 provided with pivoted segment type thrust bearings to LS 1.00 16651.26 16651.26
withstand non-vertical lead with minimum wear and tear and
duly fitted with device to take up the expansion of water with
heating of motor, including supply, testing and commissioning
of electrical panel from the same manufacturer, complete with
all accessories in all respects. The contractor to obtain
approval for model and make of pumpset & suitable Electrical
panel after having hield report of fully developed borewell and
submit acutal bore strata chart.
Insulated cable end termination along with its accessories
complete as required.
Also supply and making straight through joint heat shrinkable
type of size 4 x 4 sqmm copper
11 Providing and laying 200 mm dia PVC pipe (Schedule-80) Mtr 30.00 2555.91 76677.22
3 ELECTRIFICAITON
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
E. I. WORK / INTERNAL ELECTRICAL WORK
Recessed wirring to light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLSH PVC insulated copper
conductor of ISI marked Make- RR
KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible
non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A
modular type switch ISI marked Make-Make-
Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree)
1.0 /Panasonic (Vision), and ceiling rose ISI marked Make-
Anchor/Havells of modular type G.I box with cover Make-
Make- Schneider(Clipsal X)/legrand( Arteor) /Havells
(Crabtree) /Panasonic (Vision), of suitable size, modular box
with 1.5 sq. Mm FR PVC insulated single core multistandard
copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable for IPH
standard hospital.
Group control of point in Recessed wirring to light point/ fan
point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH
PVC insulated copper conductor of ISI marked
Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC
flexible non metallic conduit Make-AKG/KINJAL/POLYCAB
with 6A modular type switch ISI marked Make-Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),and
ceiling rose ISI marked Make- Make-Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision), of modular type G.I
box with cover Make-Make-Schneider(Clipsal X)/legrand(
Arteor) /Panasonic (Vision), of suitable size, modular box
with 1.5 sq. Mm FR PVC insulated single core multistandard
copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable for IPH
standard hospital.(Maximum 02 nos point in one circuit)
Supplying,fixing of 6A Plug on the separate board with
complete fitting by 01 no of 6A switch & socket(modular type)
with suitable size modular box & cover including supplying of
all required accessories of ISI marked as approved as per
direction of engg-in-charge..Make-Make-Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),
Supplying,fixing of 1x16A+1X 6A Plug on the separate board
with complete fitting by 02 no of 16A switch & socket(modular
type) with suitable size modular box & cover including
4.0 supplying of all required accessories of ISI marked as Nos 4.00 1388.04 5552.16
approved as per direction of engg-in-charge..Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic
(Vision),(For equipement power)
Supplying,fixing of 1x16A Plug on the separate board with
complete fitting by 01 no of 16A switch & socket(modular
type) with suitable size modular box & cover including
5.0 supplying of all required accessories of ISI marked as Nos 4.00 1118.76 4475.03
approved as per direction of engg-in-charge..Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic
(Vision),(For equipement power)
Receass wiring for circuit/submain wiring with the following
mentioned size PVC insulated, copper conductor, single core
cable ( Polycab/RR/HAVELLS) or any other equivallent
6.0 reputed make ISI marked as approved, in recessed PVC
conduit Heavy duty of mentioned size (AKG/Polycab/Kinjal or
any other equivallent reputed make ISI marked as approved)
as required as per direction of Engg.-in-Charge..
2 nos single core 1.5 sq. mm copper wire for phase and
neutral and 01 no of single core 1.5 sq. mm copper wire for
earth continuty conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire for phase and
neutral and 01 no of single core 1.5 sq. mm copper wire for
ii) earth continuty conductor in 20 mm dia non metallic heavy Rmt 30.00 212.04 6361.30
duty flexible conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 50 Sqm.mm POLYCAB/HAVELLS/KEI of following
size cables in ground including excavation,sand cushioning
protective covering and refilling the trench and as per
direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 25 Sqm.mm POLYCAB/HAVELLS/KEI of following
size cables in ground including excavation,sand cushioning
protective covering and refilling the trench and as per
direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 4 core 16 sq.mm Sqm.mm POLYCAB/HAVELLS/KEI
on surface as per direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 3 core 6 Sqm.mm POLYCAB/HAVELLS/KEI of
following size cables in ground including excavation,sand
cushioning protective covering and refilling the trench and as
per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I. pipe (medium
11.0 class) in ground complete with G.I fitting incl. trenching(75 mm
depth)and refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor mounted cubical type
electrical main panel (for both light and power circuit) made
out by 2mm CRCA steel sheet duly derusted & pented by
simens gray powder cote paint is designed as G.A drawing as
per direction of Engg.-in-Charge.
In commer- 01 number of 250(160-200) Amps 3P MCCB with
encapsulated double break . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 300Amps Electrolytic copper busbar
duly sleeved by color coaded PVC sleeve & supported by
suitable size DMC insulator.
12.0 Out going- (i) 63A 4P MCB 08 NOS FOR POWER BDB Set 1.00 275336.46 275336.46
(Legrand/Schneider make)or laundry washing machine motor
Out going- (ii) 08 nos 32A 4P MCB LIGHT BDB AC IDU
BDB/LIGHT BDB(Legrand/Schneider make) or laundry
washing machine motor.
Out going- (iii) 01 nos 100A 3P MCCB FOR RAW
POWER.(make- ABB/Siemens/ SCHNEIDER/ L&T/
Legrand,ISI marked).
Instrument- (i) 03 numbers phase indicating lamp with toggle
switch & HRC fuse.
(ii) 01 set of 0-200Amps Ameter with selecter switch &
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
S/I/T & commissioning of sub feeder pillar with 40A 4P MCB
12.1 (10KA) as incomer,outgoings-25A DP MCB 10KA-6 Nos, with Set 1.00 24254.91 24254.91
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x
6 mm thick ISI marked including accessories and providing
13.0 masonary with cover plate having loccking arrangement and Set 5.00 8221.56 41107.81
watering pipe etc (WITH charcoal and salt) as required as per
direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip on surface or
14.0 in recess for connections etc. as required as per direction of Rmt 25.00 552.87 13821.85
Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip ISI marked at
15.0 0.5Mtr below G.L as strip earth electrode. as required as per Rmt 25.00 623.12 15578.04
direction of Engg.-in-Charge.
Providing and fixing 4 mm dia copper wire on surface or in
16.0 recess for loop earthing as required.as per direction of Engg.- Rmt 63.00 136.59 8605.32
EXTERNAL ELECTRICAL WORK
Supplying & fixing of LED Spike Light for Monuments
17.0 Decoration Similar to JAQUAR/Havells/WIPRO/Bajaj with all Each 10.00 7733.73 77337.32
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying & fixing of LED Gate Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Supplying & fixing of 90watt Street/Flood Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Ceiling mounted indoor type batten type LED Luminaire with
LED lamp similar to Havells/WIPRO/Bajaj or equivalent.
S/I/T/C of exhaust fan of 300mm sweep 900 rpm in the
existing opening opening including making the hole to suit the
size of the fan ,making good the surface complate etc. as
22.0 S/I/T/C of 18W LED Bulb with Angle holder Each 4.00 1079.73 4318.92
S/I/T/C of ceiling fan 1200mm sweep,including wiring the
down rods of standard length upto 300 mm with 1.5 sq.mm
FRLSH PVC insulated single core multistrand copper
conductor etc. as required.
Supply & fixing of LED POST TOP light similar to Cat No.
BGCS 40W LED WH with 3M GI Pole and accessories.
OUTDOOR SUBSTATION (PROVISIONAL RATE)
Construction of 11KV line with 100X100mm RS Joist pole 9m
height with 55Sq.mm AAAC conductor with all associries as
well as 2nos cut point required as per distribution company
estimate required as per direction of EIC with 63KVA
11/0.4KV outdoor/plinth mounted DP Sub-Station having 5nos
earthing, metaling, barbed fencing etc
PANEL BOARDS & DBS
S/I/T&Commissioning of LT outdoor/indoor floor mounted type
Distribution Board made out of 2mm steel sheet cubical duly
derusted & pented by simens gray powder cote paint is
designed having hinged door & compartmental arrangements
for each Equipment and Busbar Chamber on the top of the
panel running horizontally, having provision for
cable/conduit,eartthing studs as per specification mentioned
below,duly factory wired conforming to the relevant IS and as
per special conditions of contract making good the surfaces
complete as per direction of EIC.
26.3 Equipment: 3 Nos. RYB Led indicator Set 1.00 80654.56 80654.56
S/IT/C of materials and installation of pipe earth electrode
made out of 50mm dia class B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I. flat / wire with G. I.
nut bolts & washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements, brick masonary
enclosure on top with removable RCC cover complete with
labour for excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-charge.
S/I of safe earth electrodes (Chemical earthing) including cost
28.0 electrodes,earthing compound,excavation of earthing Nos 1.00 27318.48 27318.48
pit,refilling etc. as required (For Lightning protection system).
Supply of materials and laying underground/floor/wall including
making end termination and testing of following sizes of G.I
29.0 earthing conductor for loop,earthing of equipments,switch
boards and panels as required complete and as directed by
Supply of materials and laying underground/floor/wall including
making end termination and testing of 8 SWG of G.I wire for
loop earthing of equipments,switch boards and panels as
required complete and as directed by EIC.
SAFETY EQUIPMENT
31.0 Supply and hanging of shock treatment chart duly laminated. Nos 3.00 793.54 2380.61
Supply and laying of 8 mm thick rubber mat,ISI marked of
S/I of 3 nos. Fire buckets painted with red & white colour on a
33.0 M.S. Stand complete as per specification and requirement of Set 2.00 1756.19 3512.38
Fire safety provisions.
S/I of 5 Kgs. Capacity CO2 type Fire extinguisher complete as
35.0 S/I 440 Volt Danger Board. Nos 3.00 156.11 468.32
36.0 Supply and fixing of 100mm dia GI pipe. Rmt. 12.00 845.57 10146.86
37.0 DG set 30 KVA silent type 3 phase.
a) S/I of 30 KVA 3 phase silent type DG set of required size
with testing & permission from Govt. Authority.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
NILAKANTHA SAGAR LAKE, JEYPORE, KORAPUT ODISHA.
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
1a. POND DEVELOPMENT
Clearance of slush and muck from foundation pit by manual
1 means including removal of debris within 50 m. initial lead and CUM 21780.00 277.11 6035464.51
initial lift of 1.5m as directed by the Engineer-in-charge.
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to maximum 5cm to
2 7cm & laying in layers not exceding 0.3 M in depth & as per CUM 14520.00 388.08 5634921.60
direction of the Engineer-in-charge. Add for Cost of disposal of
excavated earth by mechanical means
De-watering of water of pond with disel/electric pump, payment
3 shall paid once.Complete as per direction of the Engineer-in- CUM 5000.00 169.46 847280.00
Filling in foundation and plinth with excavatedmaterials
4 including watering and ramming as directed by the Engineer-in- CUM 35900.00 121.52 4362568.00
Disposal of excavated over burden earth, carraige for 5km lead
5 by mechanical trancport including loading, unloading and CUM 400.00 199.57 79829.12
stacking of earth as directed by Engineer in charge.
Rough stone dry packing in approns and revetments with hard
granite stones (15cm to 30cm)
Single under reamed pile foundation with RCC M20 using
12mm size black hard granite (Crusher broken) stone chips
1 including cost of boring but excluding cost of M.S./Tor steel and NOS 342.00 7652.01 2616988.65
labour charges for cutting, bending and binding of steel. ( 375
mm dia and 6.0 metre long )
Levelling Course for Pile cap Providing and laying of PCC M15
levelling course 100mm thick below the pile cap.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Post on Deck, Kerb Wall & Post Besides Pathway CUM 49.10 5647.82 277330.75
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over
and including priming coat of exterior primer applied@
Fixing Dholpuri Sandstone in floors treads or steps and landing
on 20 mm thick bed of cement mortar 1:4 (1cement : 4 sand)
8 jointed with neat cement slury mixed with pigment to match the SQM 831.60 1080.80 898793.28
shades of the tiles including rubbing and polishing complete
including cost of Dholpuri Sandstone
Fixing Dholpuri Sandstone in floors treads or steps and landing
on 20 mm thick bed of cement mortar 1:4 (1cement : 4 sand)
8 jointed with neat cement slury mixed with pigment to match the SQM 174.48 1303.01 227348.84
shades of the tiles including rubbing and polishing complete
including cost of Dholpuri Sandstone
Sipplying and fixing M.S Gate, Door & Window, railing made out
with ms flat, angle of approved design & specification including
9 cost of all materials, manufacture, and one coat of primer, all KG 16893.28 170.35 2877803.18
taxes T&P etc complete as per the direction of Engineer-In-
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Disposal of excavated over burden earth, carraige for 5km lead
2 by mechanical trancport including loading, unloading and CUM 1545.07 199.57 308353.85
stacking of earth as directed by Engineer in charge.
Supplying & filling foundation and plinth with sand well watered
3 and rammed including cost, cost of all labour, carriage, royalty, CUM 637.73 570.53 363844.63
taxes, T&P etc complete.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
4 charges of concrete mixture, vibrator, watering, curing and CUM 236.04 5998.16 1415805.69
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including hoisting
5 laying using concrete mixture and vibrators including cost, CUM 464.48 5027.90 2335337.97
carriage, royalty, cost of all labour T.&P. etc complete and as
directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Fixing Dholpuri Sandstone in floors treads or steps and landing
on 20 mm thick bed of cement mortar 1:4 (1cement : 4 sand)
8 jointed with neat cement slury mixed with pigment to match the SQM 6246.00 1080.80 6750676.80
shades of the tiles including rubbing and polishing complete
including cost of Dholpuri Sandstone
1d. Front Boundary Wall
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to o maximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & Filling foundation and plinth with excavated Earth
inluding watering and ramming ( Back Filling of Excavation)
Supplying & filling foundation and plinth with sand well watered
3 and rammed including cost, cost of all labour, carriage, royalty, CUM 32.67 570.53 18640.29
taxes, T&P etc complete. ( Below Floor Area )
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including hoisting
4 laying using concrete mixture and vibrators including cost, CUM 32.67 5027.90 164271.68
carriage, royalty, cost of all labour T.&P. etc complete and as
directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Column (UP to Plinth Beam top) CUM 3.92 14118.05 55272.16
Plinth Beam length in to in CUM 11.75 6236.83 73282.78
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
10 charges of concrete mixture, vibrator, watering, curing and CUM 5.40 5998.16 32390.06
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
16mm Outer wall plaster of ratio 1:6 including all necessary
11 scafolding, curing etc. complete all Depth, height for outside SQM 550.44 230.96 127128.03
wall as per drawing and Engineering-in-charge
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
12 watering, curing cost, carriage, royalty, and taxes of all SQM 88.20 182.45 16091.91
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
13 making smooth to recive painting including cost of scaffolding SQM 638.64 132.38 84545.72
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with Weather coa paints over
15 two coats of wall putty punning to the inside surface of walls SQM 638.64 67.87 43345.77
including, all cost of materials, labour, T&P, etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
mixed with pigment to match the shades of the tiles including
rubbing and polishing complete including cost, carriage, royalty
& taxes of all material, cost of all labour T&P etc. complete.
Sipplying and fixing M.S Gate, Door, Window, Grills &
Rectangular Section of approved design & specification
including cost of all materials, manufacture, and one coat of
primer, all taxes T&P etc complete as per the direction of
Engineer-In-Charge.(Taking 45.00kg for door window & 100kg
for gate /Sqm & Taking Grill 15kg per SQM)
Painting with Enamel paint of approved quality and shade over
surface with 2 coats over 1 coat of primer etc.
1e. SIDE BOUNDARY WALL
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & Filling foundation and plinth with excavated Earth
inluding watering and ramming ( Back Filling of Excavation)
Supplying & filling foundation and plinth with sand well watered
3 and rammed including cost, cost of all labour, carriage, royalty, CUM 342.67 570.53 195500.55
taxes, T&P etc complete. ( Below Floor Area )
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including hoisting
4 laying using concrete mixture and vibrators including cost, CUM 178.10 5027.90 895459.65
carriage, royalty, cost of all labour T.&P. etc complete and as
directed by E.I.C.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
5 charges of concrete mixture, vibrator, watering, curing and CUM 24.75 5998.16 148454.46
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) CUM 32.42 14118.05 457689.47
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
10 scafolding, curing etc. complete all Depth, height for outside SQM 1968.00 230.96 454523.58
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
11 watering, curing cost, carriage, royalty, and taxes of all SQM 492.00 182.45 89764.42
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
12 making smooth to recive painting including cost of scaffolding SQM 3936.00 132.38 521063.42
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Providing & painting two coats with Weather coa paints over
14 two coats of wall putty punning to the inside surface of walls SQM 3936.00 67.87 267144.19
including, all cost of materials, labour, T&P, etc.
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Filling foundation and plinth with excavated Earth inluding
watering and ramming (Back filling of Excavation)
Supplying & filling foundation and plinth with sand well watered
3 and rammed including cost, cost of all labour, carriage, royalty, CUM 10.57 570.53 6032.19
taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including hoisting
4 laying using concrete mixture and vibrators including cost, CUM 5.21 5027.90 26200.41
carriage, royalty, cost of all labour T.&P. etc complete and as
directed by E.I.C.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
5 charges of concrete mixture, vibrator, watering, curing and CUM 0.88 5998.16 5278.38
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Footing & Pedestal CUM 3.13 5824.45 18242.17
* Plinth Beam CUM 1.09 6236.83 6819.98
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column & Roof Beam CUM 2.15 14118.05 30367.92
* Lintel Beam CUM 0.64 9850.06 6264.64
* Vertical Slab Between Two Column CUM 0.35 10347.79 3601.03
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
12 scafolding, curing etc. complete all Depth, height for outside SQM 93.25 230.96 21535.60
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
14 watering, curing cost, carriage, royalty, and taxes of all SQM 15.04 182.45 2744.02
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
making smooth to recive painting including cost of scaffolding
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints over
17 two coats of wall putty punning to the inside surface of walls SQM 44.44 88.26 3922.10
including, all cost of materials, labour, T&P, etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Providing & painting two coats with Weather coa paints over
18 two coats of wall putty punning to the inside surface of walls SQM 93.25 67.87 6328.72
including, all cost of materials, labour, T&P, etc.
Fixing Marble stone in dados skirting and risers of steps on
12mm thick cement plaster (1:3) jointed with neat cement slurry
mixed with pigments to match the shade of the tiles including
rubbing and polishing complete including all costs complete
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
mixed with pigment to match the shades of the tiles including
rubbing and polishing complete including cost, carriage, royalty
& taxes of all material, cost of all labour T&P etc. complete.
Supplying, fitting and fixing vitrified tile (Printed) in floors of size
600mm x 600mm of approved make conformaing to IS : 13755
laid on 20 mm thick cement mortar (1:4) (1 cement :4 course
sand) and filling joints with white cement of approved quality
including cost of all materials, labour T&P etc. required for the
work all complete as per direction of E.I.C. (For New work only).
Fixing Vitrified tiles (size 600mmx600mm) (Printed) in dados
skirting and risers of steps on 12mm thick cement plaster (1:3)
22 jointed with neat cement slurry mixed with pigments to match SQM 1.47 1231.33 1810.05
the shade of the tiles including cost, carriage, cost of all labour
Sipplying and fixing M.S Gate, Door, Window, Grills &
Rectangular Section of approved design & specification
including cost of all materials, manufacture, and one coat of
primer, all taxes T&P etc complete as per the direction of
Engineer-In-Charge.(Taking 45.00kg for door window & 100kg
for gate /Sqm & Taking Grill 15kg per SQM)
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including cost,
conveyance, royalty and taxes of all materials,hire charges of
drilling machine and cost of all labour T&P required for the work
complete in all respect as per direciton of the Engineer-in-
Supplying, fitting, fixing up window (sliding type) made up
aluminium section 151-154, 151-155,aswindow frame Section
No. 151-155, 151-153 and 151-167 as shutter frame with 5mm
26 thick black glass as pannel fitted with rubber beading including Nos 6.40 6624.25 42395.17
locking arrangement including all fitting including cost of
materials all taxes of labour, T&P etc. complete asper direction
Painting with Enamel paint of approved quality and shade over
surface with 2 coats over 1 coat of primer etc.
1g. TOILET BLOCK
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & filling foundation and plinth with sand well watered
2 and rammed including cost, cost of all labour, carriage, royalty, CUM 105.14 570.53 59983.93
taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including hoisting
3 laying using concrete mixture and vibrators including cost, CUM 13.69 5027.90 68851.41
carriage, royalty, cost of all labour T.&P. etc complete and as
directed by E.I.C.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
4 charges of concrete mixture, vibrator, watering, curing and CUM 14.31 5998.16 85847.53
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (UP to Plinth Beam) CUM 0.62 14118.05 8738.08
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite C.B.
chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) CUM 1.90 14118.05 26886.41
Providing M.S. reinforcement for R.C.C. work including cutting,
bending, binding and tying the grills and placing in position
including cost of binding wire 18 to 20 gauge and cost and
carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size having
crushing strength not less than 75Kg/cm2 with dimensional
tolerance ±8 percent in cement mortar (1:6) in Foundation and
Plinth including watering curing, cost of carriage, royalty and
taxes of all materials, cost of all labour, T&P etc complete as
per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
11 scafolding, curing etc. complete all Depth, height for outside SQM 120.64 230.96 27862.67
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
13 watering, curing cost, carriage, royalty, and taxes of all SQM 91.44 182.45 16682.32
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
14 making smooth to recive painting including cost of scaffolding SQM 453.24 132.38 60001.73
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints over
16 two coats of wall putty punning to the inside surface of walls SQM 332.60 88.26 29353.95
including, all cost of materials, labour, T&P, etc.
Providing & painting two coats with Weather coa paints over
17 two coats of wall putty punning to the inside surface of walls SQM 120.64 67.87 8188.08
including, all cost of materials, labour, T&P, etc.
Fixing glazzed tiles (30cmx30cm / 40cm x 40cm special
plain/printed series ceramic tiles of premium grade having
thickness 7 mm to 8mm confirming to IS 13755) in floors treads
or steps and landing on 20 mm thick bed of cement mortar 1:4
(1cement : 4sand) jointed with neat cement slury mixed with
pigment to match the shades of the tiles including cost of tiles.
Fixing glazzed tiles (20cmx30cm / 20cm x 20cm special
plain/printed series ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS 13753) in dados
skirting and risers of steps on 12mm thick cement plaster (1:3)
jointed with neat cement slurry mixed with pigments to match
the shades of the tiles including cost of tiles.
Fixing Kota stone in floors treads or steps and landing on 20
mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed
20 with neat cement slury mixed with pigment to match the shades SQM 36.33 1165.58 42348.00
of the tiles including rubbing and polishing complete including
cost of kota stone.
Fixing Kota stone in dados skirting and risers of steps on 12mm
thick cement plaster (1:3) jointed with neat cement slurry mixed
with pigments to match the shade of the tiles including rubbing
and polishing complete including all costs complete
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including cost,
conveyance, royalty and taxes of all materials,hire charges of
drilling machine and cost of all labour T&P required for the work
complete in all respect as per direciton of the Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying, fitting, fixing up window (sliding type) made up
aluminium section 151-154, 151-155,aswindow frame Section
No. 151-155, 151-153 and 151-167 as shutter frame with 5mm
24 thick black glass as pannel fitted with rubber beading including sqm 4.91 6624.25 32491.92
locking arrangement including all fitting including cost of
materials all taxes of labour, T&P etc. complete asper direction
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
25 mixed with pigment to match the shades of the tiles including sqm 4.16 2694.72 11210.04
rubbing and polishing complete including cost, carriage, royalty
& taxes of all material, cost of all labour T&P etc. complete.
1h. DISMANTLING
Dismantling brick or stone masonry in lime or cement mortar
1 abover 3m. height including stacking the useful materials for CUM 217.80 1300.50 283248.48
reuse and removing the debris within 50m. Lead
Dismantling and removing R.C.C. columns beams slab
2 staircase landing lintels including stacking the useful materials CUM 50.26 486.69 24462.72
for reuse and removing the debris within 50m lead
2a. SANITARY & PLUMBING WORK
Fixing water closet, squatting pan (Indian type W.C pan)
conforming to IS 2556 : Part 3-2004 duly embedded in cement
concrete (1:4:8) using hard granite metal 4cm nominal size
allcomplete as per specification.
White Glazed vitreous china Squatting pan- long pattern size
Fixing in cement mortar (1:3) a pair of white vitreous china
2 250mm x 130mm x 30mm foot rest for squatting pan water Each 7.00 165.17 1156.21
closet as per specification
Fixing Wash Down Water Closet (European type W.C pan) with
integral ‘S’ or ‘P’ trapconforming to IS 2556 : Part 8-2004, to the
3 floor with wooden plug and chromium plated screws including Each 1.00 27058.23 27058.23
jointing the trap with soil pipe in cement mortar (1:1) etc all
complete as per specification. (Seat and cover to be measured
Providing and fixing P.V.C. low level flushing cistern with
manually controlled device (handle lever) conforming to IS : Each 8.00 1670.20 13361.60
7231, with all fittings and fixtures complete.
Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996
including connecting the urinal of430x260x350 mm or
340x410x265 mm sizes respectively with waste pipe by means Each 6.00 12501.01 75006.09
of white lead mixed with chopped hemp etc all complete as per
Fixing PVC automatic flushing cistern including cutting holes
and making good the same all complete as per specification.
Supplying , fitting , fixing of porcelein wash hand basin of size
450mm x 350 mm of CERA make, catalogue no Canon 1012
Wash Basin of Equivalent of Parryware/ Hindware with rog
3 bolts, CI brackets, hole for pillar cock with cast iron/ M.S. Each 8.00 2213.59 17708.72
brackets painted while including cutting holes in wall and
making good to the damages etc. all complete with materials ,
labour and T& P etc.
Supplying , Fitting , fixing of ( 600 x 450 mm ) Framed Mirror
mirror of superior glass mounted on 6mm thk A.C. sheet and
fixed to wooden plugs with cromium plated brass screws and
washers etc. all complete with materials , labour and T & P etc.
6 Providing and fixing PVC soil waste and vent pipes
8 Providing and fixing PVC plain bend of required degree
Providing and fixing PVC single equal plain junction of required
9 degee with access door, insertion rubber washer 3mm thick,
bolts and nuts complete .
Providing and fixing door piece, insertion rubber washer 3mm
thick , bolts & nuts complete .
11 Providing & fixing PVC terminal guard (i) 110 mm Each 15.00 67.20 1008.00
Providing and fixing on wall face unplasticised Rigid PVC soil,
waste and rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS: 5382, leaving
10 mm gap for thermal expansion, (i) Single socketed pipes
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying, fitting, fixing to walls, ceiling and floor upplasticized
PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2) th
efollowing nominal diameter with fittings and clamps includings
testing all complete with materials labour and T & P etc.
a) 15mm dia nominal bore metre 800.00 92.51 74009.60
b) 20mm dia nominal bore metre 500.00 128.46 64232.00
c) 25 mm dia nominal bore metre 200.00 179.42 35884.80
d) 32 mm dia nominal bore metre 200.00 131.15 26230.40
e) 40 mm dia nominal bore. metre 150.00 316.29 47443.20
13 Providing and fioxing brass bib cock of approved quality .
(i) 15 mm nominal bore short body Each 8.00 921.08 7368.60
(ii) 15mm nominal bore long body Each 30.00 1204.38 36131.43
Providing and fixing brass stop cock with wall flush of approved
(i) 15 mm nominal bore. Each 20.00 771.89 15437.88
Providing and fixing gun metal gate valve with C.I. wheel of
approved qualioty ( screwed end)
(i) 25 mm dia Nominal bore Each 5.00 625.44 3127.20
(ii) 32 mm dia Nominal bore Each 5.00 1266.89 6334.44
16 Sand Cast Iron S&S as per IS: 1729 (Gully Trap) Each 4.00 969.36 3877.44
Supply all labour , materials and T & P and laying to level and
slope and jointing with cement mortar(1:1) for PVC pipes .
17 (Grade-A) of the following diametersas per specification al metre 25.00 1026.72 25667.99
complete (excluding earth work in trenches)(data for 30 mtr.)
(per mtr) S.W. Pipe 150mm dia.
Supplying all materials, labour and T & P for construction of
18 inspection chamber as per P.H. specification and design all Each 1.00 8209.60 8209.60
ocmplete ( per each)
Fixing Rotational moulded polyethylene cylindrical vertical water
storage tanks conforming to IS : 12701--1996 including cutting
holes through the tank and fixing mild steel tubes and fittings
and providing extra sockets and jam nuts, fixing ball valve etc,
including hoisting upto a height of 5 metres above ground level
and placing the tank to the required position etc all complete as
per specification and direction
2000 litre capacity Double Layer Cylinderical Vertical water
storage tanks Each 15.00 22088.04 331320.61
Labour for drilling a perfectly vertical bore hole of specified dia
for a specified depth below ground level through consolidated
and unconsolidated rock with down the hole hammer drilling
rigs or combination drilling rigs (1200 cfm/ 300 psi) as required
to suit the site condition as per the direction of Engineer-in-
charge including use of own rigs with its accessories, tools and
plant and consumables etc for lowering of 200 mm dia PVC/GI
pipes for housing fitted with socket and with or without well
screen as per the necessity for soft, medium, hard and boulder
formation (GI/PVC casing pipes if required to prevent collapse
of over burden is to be provided by the contractor including
lowering and withdrawing after completion of the tube well).
Lowering the following size G.I/ PVC pipes with or without
slotted pipes as per the necessity from ground level and fitted
and fixed up in perfectly vertical position, including cutting and
2 threading pipe and slotted pipe and supplying and fixing all
jointing materials, tools and plant etc. complete and keeping the
top of the casing pipe threaded including plugging tube wells to
prevent entry of foreign materials from above.
* Labour for lowering of 200 mm dia PVC/GI Casing Pipes
0 to 45 Mtrs. and above of Lowering Mtr 45.00 265.78 11959.92
Cleaning and developing the tube well using their own
compressor continuously worked till clear and adequate
3 discharge is obtained from the tube well including supply and
use of all necessary equipment and labour as per the direction
of Engineer-in-Charge.
* Labour for developing of tubewell Hour 2.00 9580.93 19161.86
Supplying all materials and labour, tools and plant and providing
sanitary sealing by cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5 mtrs below ground
level (as per drawing) to plug the bore hole excluding cost of
cement all complete as per direction of Engineer in charge.
Minimum one metre of casing pipe to be inserted in the bore
into the rock at the bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied by the Department)
* Sanitary sealing upto 5 mtrs below ground level Mtr 5.00 2385.60 11928.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying all materials, labour, tools and plant and withdrawing
5 casing pipes from the unsuccessful bore and depositing in the
departmental store in good condition.
* Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe Mtr 30.00 317.97 9539.04
Supplying, assembling, lowering and fixing in vertical position in
bore well, unplasticized PVC medium well casing (CM) pipe of
required dia, conforming to IS: 12818, including required hire
and labour charges, fittings & accessories etc. all complete, for
all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia RM 80.00 1906.24 152499.20
Supplying, assembling, lowering and fixing in vertical position in
bore well unplasticized PVC medium well screen (RMS) pipes
with ribs, conforming to IS: 12818, including hire & labour
charges, fittings & accessories etc. all complete, for all depths,
as per direction of Engineer-in-charge.
200 mm nominal size dia RM 70.00 1541.12 107878.40
Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing pipe,
removable as per requirement, all complete for borewell of 200
Supplying, filling, spreading & leveling gravels of size range 5
mm to 10 mm, in the recharge pit, over the existing layer of
boulders, in required thickness, for all leads & lifts, all complete
as per direction of Engineer-in-charge
Providing and fixing Bail plug/ Bottom plug of required dia to the
bottom of pipe assembly of tubewell as per IS:2800 (part I).
Development of tube well in accordance with IS : 2800 (part I)
and IS: 11189, to establish maximum rate of usable water yield
without sand content (beyond permissible limit), with required
capacity air compressor, running the compressor for required
time till well is fully developed, measuring yield of well by “V”
9 notch method or any other approved method, measuring static Hour 48.00 655.20 31449.60
level & draw down etc. by step draw down method, collecting
water samples & getting tested in approved laboratory, i/c
disinfection of tubewell, all complete, including hire & labour
charges of air compressor, tools & accessories etc., all as per
requirement and direction of Engineer-in-charge.
Transportation and erection of drilling plants, developing
equipments & all other required tools and M/C by and suitable
mechanical means including all cost of loading, unloading, Each 1.00 56000.00 56000.00
placing at work site and back after completion of work as per
Providing and fixing brass full way 100 mm dia valve with C.I.
wheel of approved make, tested to a pressure of 21 kg/sqcm.
Providing and fixing 100 mm dia gunmetal non return valve of
approved make tested 21 kg / sqcm.
Providing and fixing GI pipe (heavy duty) confirming to IS 1239
with special fittings in external works including earthwork,
excavation in all kind of soil including refilling, painting pipes & Each 150.00 784.00 117600.00
fitting with two coats of anti corrosive paint complete and all as
directed by Engineer-in-Charge.
10 Providing and filling sand all around GI pipe in external work cum 50.00 705.60 35280.00
Providing and installing submersible pump suitable for 8"dia
casing of bore with SS impeller, high tensile SS shaft, copper
wound squirrel cage wet type induction motor 2880 rpm, 415 V,
50 Hz, 3 Phase AC supply, conforming to IS: 8034-1976,
capacity 100 litre per minute at 70-120 m head along with
adireclty coupled submersible type squirrel cage electric
induction 12.5 HP motor suitable for operation on 400 V, 3
phase, 50 c.p.s AC supply, water lubricated bearings and
11 provided with pivoted segment type thrust bearings to withstand LS 1.00 16651.26 16651.26
non-vertical lead with minimum wear and tear and duly fitted
with device to take up the expansion of water with heating of
motor, including supply, testing and commissioning of electrical
panel from the same manufacturer, complete with all
accessories in all respects. The contractor to obtain approval
for model and make of pumpset & suitable Electrical panel after
having hield report of fully developed borewell and submit
acutal bore strata chart.
Insulated cable end termination along with its accessories
complete as required.
Also supply and making straight through joint heat shrinkable
type of size 4 x 4 sqmm copper
* Providing and laying 200 mm dia PVC pipe (Schedule-80) Mtr 15.00 2800.00 42000.00
3 ABSTRACT OF ELECTRIFICAITON
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
E. I. WORK / INTERNAL ELECTRICAL WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH PVC insulated copper
conductor of ISI marked Make- RR
KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible non
metallic conduit Make-AKG/KINJAL/POLYCAB with 6A modular
type switch ISI marked Make-Make- Schneider(Clipsal
X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision),
and ceiling rose ISI marked Make- Anchor/Havells of modular
type G.I box with cover Make-Make- Schneider(Clipsal
X)/legrand( Arteor) /Havells (Crabtree) /Panasonic (Vision), of
suitable size, modular box with 1.5 sq. Mm FR PVC insulated
single core multistandard copper conductor as earth wire
including all accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital.
Group control of point in Recessed wirring to light point/ fan
point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH
PVC insulated copper conductor of ISI marked Make-
RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible
non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A
modular type switch ISI marked Make-Make- Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),and ceiling rose ISI
marked Make- Make-Schneider(Clipsal X)/legrand( Arteor)
/Panasonic (Vision), of modular type G.I box with cover Make-
Make-Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),
of suitable size, modular box with 1.5 sq. Mm FR PVC
insulated single core multistandard copper conductor as earth
wire including all accessories and connection as per direction of
Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete
suitable for IPH standard hospital.(Maximum 02 nos point in
Supplying,fixing of 6A Plug on the separate board with complete
fitting by 01 no of 6A switch & socket(modular type) with
suitable size modular box & cover including supplying of all
required accessories of ISI marked as approved as per
direction of engg-in-charge..Make-Make-Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),
Supplying,fixing of 1x16A+1X 6A Plug on the separate board
with complete fitting by 02 no of 16A switch & socket(modular
type) with suitable size modular box & cover including supplying
4.0 of all required accessories of ISI marked as approved as per Nos 2.00 1195.04 2390.08
direction of engg-in-charge..Make- Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),(For equipement
Supplying,fixing of 1x16A Plug on the separate board with
complete fitting by 01 no of 16A switch & socket(modular
type) with suitable size modular box & cover including supplying
5.0 of all required accessories of ISI marked as approved as per Nos 2.00 963.20 1926.40
direction of engg-in-charge..Make- Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),(For equipement
Receass wiring for circuit/submain wiring with the following
mentioned size PVC insulated, copper conductor, single core
cable ( Polycab/RR/HAVELLS) or any other equivallent reputed
6.0 make ISI marked as approved, in recessed PVC conduit Heavy
duty of mentioned size (AKG/Polycab/Kinjal or any other
equivallent reputed make ISI marked as approved) as required
as per direction of Engg.-in-Charge..
2 nos single core 1.5 sq. mm copper wire for phase and neutral
and 01 no of single core 1.5 sq. mm copper wire for earth
continuty conductor. In 20 mm dia non metallic heavy duty
flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire for phase and neutral
and 01 no of single core 1.5 sq. mm copper wire for earth
ii) continuty conductor in 20 mm dia non metallic heavy duty Rmt 30.00 182.56 5476.80
flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
Supplying & laying of one number PVC insulated armoured and
PVC sheathed AL. conductor power cable of 1.1 KV grade of
50 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables
in ground including excavation,sand cushioning protective
covering and refilling the trench and as per direction of Engg.-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying & laying of one number PVC insulated armoured and
PVC sheathed AL. conductor power cable of 1.1 KV grade of
25 Sqm.mm POLYCAB/HAVELLS/KEI of following size cables
in ground including excavation,sand cushioning protective
covering and refilling the trench and as per direction of Engg.-
Supplying & laying of one number PVC insulated armoured and
PVC sheathed AL. conductor power cable of 1.1 KV grade of
4 core 16 sq.mm Sqm.mm POLYCAB/HAVELLS/KEI on
surface as per direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured and
PVC sheathed AL. conductor power cable of 1.1 KV grade of
3 core 6 Sqm.mm POLYCAB/HAVELLS/KEI of following size
cables in ground including excavation,sand cushioning
protective covering and refilling the trench and as per direction
of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I. pipe (medium
11.0 class) in ground complete with G.I fitting incl. trenching(75 mm
depth)and refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor mounted cubical type
electrical main panel (for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted & pented by simens
gray powder cote paint is designed as G.A drawing as per
direction of Engg.-in-Charge.
In commer- 01 number of 250(160-200) Amps 3P MCCB with
encapsulated double break . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 300Amps Electrolytic copper busbar
duly sleeved by color coaded PVC sleeve & supported by
suitable size DMC insulator.
12.0 Out going- (i) 63A 4P MCB 08 NOS FOR POWER BDB Set 1.00 237154.40 237154.40
(Legrand/Schneider make)or laundry washing machine motor
Out going- (ii) 08 nos 32A 4P MCB LIGHT BDB AC IDU
BDB/LIGHT BDB(Legrand/Schneider make) or laundry
washing machine motor.
Out going- (iii) 01 nos 100A 3P MCCB FOR RAW
POWER.(make- ABB/Siemens/ SCHNEIDER/ L&T/ Legrand,ISI
Instrument- (i) 03 numbers phase indicating lamp with toggle
switch & HRC fuse.
(ii) 01 set of 0-200Amps Ameter with selecter switch &
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
S/I/T & commissioning of sub feeder pillar with 40A 4P MCB
12.1 (10KA) as incomer,outgoings-25A DP MCB 10KA-6 Nos, with Set 6.00 20891.36 125348.16
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x
6 mm thick ISI marked including accessories and providing
13.0 masonary with cover plate having loccking arrangement and Set 20.00 7080.64 141612.80
watering pipe etc (WITH charcoal and salt) as required as per
direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip on surface or in
14.0 recess for connections etc. as required as per direction of Engg.- Rmt 250.00 476.00 119000.00
Providing and fixing 25mm x 5 mm copper strip ISI marked at
15.0 0.5Mtr below G.L as strip earth electrode. as required as per Rmt 350.00 536.48 187768.00
direction of Engg.-in-Charge.
Providing and fixing 4 mm dia copper wire on surface or in
16.0 recess for loop earthing as required.as per direction of Engg.- in- Rmt 350.00 117.60 41160.00
EXTERNAL ELECTRICAL WORK
Supplying & fixing of LED Spike Light for Monuments
17.0 Decoration Similar to JAQUAR/Havells/WIPRO/Bajaj with all Each 45.00 6660.64 299728.80
Supplying & fixing of LED Wall Decorative Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Supplying & fixing of LED Under Water Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Supplying & fixing of LED Under Water Fountain Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Supplying & fixing of LED Gate Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying & fixing of 90watt Street/Flood Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Ceiling mounted indoor type batten type LED Luminaire with
LED lamp similar to Havells/WIPRO/Bajaj or equivalent.
S/I/T/C of exhaust fan of 300mm sweep 900 rpm in the existing
opening opening including making the hole to suit the size of Each 6.00 2352.00 14112.00
the fan ,making good the surface complate etc. as required.
S/I/T/C of 18W LED Bulb with Angle holder Each 8.00 929.60 7436.80
S/I/T/C of ceiling fan 1200mm sweep,including wiring the down
rods of standard length upto 300 mm with 1.5 sq.mm FRLSH
PVC insulated single core multistrand copper conductor etc. as
Supply & fixing of LED POST TOP light similar to Cat No.
BGCS 40W LED WH with 3M GI Pole and accessories.
OUTDOOR SUBSTATION (PROVISIONAL RATE) 0.00
Construction of 11KV line with 100X100mm RS Joist pole 9m
height with 55Sq.mm AAAC conductor with all associries as
well as 2nos cut point required as per distribution company
estimate required as per direction of EIC with 63KVA 11/0.4KV
outdoor/plinth mounted DP Sub-Station having 5nos earthing,
metaling, barbed fencing etc
PANEL BOARDS & DBS
S/I/T&Commissioning of LT outdoor/indoor floor mounted type
Distribution Board made out of 2mm steel sheet cubical duly
derusted & pented by simens gray powder cote paint is
designed having hinged door & compartmental arrangements
for each Equipment and Busbar Chamber on the top of the
panel running horizontally, having provision for
cable/conduit,eartthing studs as per specification mentioned
below,duly factory wired conforming to the relevant IS and as
per special conditions of contract making good the surfaces
complete as per direction of EIC.
a)Outdoor Sub Station Panel
Incoming : 1 no. 250 Amp. 4P MCCB-50 KA (MPR)
Outgoing : 400Amp. Bus bar
Equipment: 3 Nos. RYB Led indicator Set 1.00 69440.00 69440.00
S/IT/C of materials and installation of pipe earth electrode
made out of 50mm dia class B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I. flat / wire with G. I.
nut bolts & washers including cost of burnt wood charcoal, salt,
foreign soil, water pouring arrangements, brick masonary
enclosure on top with removable RCC cover complete with
labour for excavation of pit in all kinds of soil & rock as required
and as per direction of Engineer-in-charge.
S/I of safe earth electrodes (Chemical earthing) including cost
26.0 electrodes,earthing compound,excavation of earthing pit,refilling Nos 2.00 23520.00 47040.00
etc. as required (For Lightning protection system).
Supply of materials and laying underground/floor/wall including
making end termination and testing of following sizes of G.I
27.0 earthing conductor for loop,earthing of equipments,switch
boards and panels as required complete and as directed by
Supply of materials and laying underground/floor/wall including
making end termination and testing of 8 SWG of G.I wire for
loop earthing of equipments,switch boards and panels as
required complete and as directed by EIC.
SAFETY EQUIPMENT
29.0 Supply and hanging of shock treatment chart duly laminated. Nos 3.00 683.20 2049.60
Supply and laying of 8 mm thick rubber mat,ISI marked of 1100
S/I of 3 nos. Fire buckets painted with red & white colour on a
31.0 M.S. Stand complete as per specification and requirement of Set 2.00 1512.00 3024.00
Fire safety provisions.
S/I of 5 Kgs. Capacity CO2 type Fire extinguisher complete as
33.0 S/I 440 Volt Danger Board. Nos 4.00 134.40 537.60
34.0 Supply and fixing of 100mm dia GI pipe. Rmt. 12.00 728.00 8736.00
DG set 30 KVA silent type 3 phase.
a) S/I of 30 KVA 3 phase silent type DG set of required size
with testing & permission from Govt. Authority.
b) Neutral earthing for DG set (600x600x3mm copper plate,
40x5 mm copper flat)
38 c)Body earthing for DG set Set 2.00 4256.00 8512.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
3a. OPEN GYM EQUIPMENTS
DOUBLE AIR WALKER /SG-02
PRODUCT AREA :- L x W x H
2340mmx785mmx1390mm
SAFE PLAY AREA:-4460mmx3700mm
MAIN FRAME :-90 MM OD MS PIPE
LEG FRAME:- 48MM OD MSPIPE & MS PLATE.
HANDLE FRAME:- 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004,MS NUT-BOLTS
PARALLER BARS /SG-04
PRODUCT AREA :- L x W x H
1770 mmx 680mm x 1525 mm
2 SAFE PLAY AREA:- 4500mmx4350mm Each 2.00 9107.28 18214.56
MAIN FRAME :-60MM OD MS PIPE
HANDLE FRAME:- 60MM OD MS PIPE
DOUBLE CHEST PRESSER /SG-07
PRODUCT AREA :- L x W x H
1675mmx782mmx2160mm
SAFE PLAY AREA:-3100mmx1850mm
3 CENTER PIPE :-114MM OD MS PIPE Each 2.00 33824.00 67648.00
SEAT FRAME :- 42OD MM MS PIPE
LEG FRAME:- 48MM OD MS PIPE
HANDLE FRAME:- 42MM OD & 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004, MS NUT-BOLTS
SINGLE WHEEL SHOULDER BUILDER /SG-13
PRODUCT AREA :- L x W x H
760mmx360mmx1674mm
4 SAFE PLAY AREA:-3240mmx3700mm Each 2.00 14310.80 28621.60
CENTER PIPE :-114mm OD MS PIPE
HANDLE FRAME:- 32mm OD & 25mm OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004, MS NUTBOLTS .
SIT UP BOARD/SG-16
PRODUCT AREA :- L x W x H
1378mmx590mmx1220mm
5 SAFE PLAY AREA:-3048mmx4350mm Each 2.00 12359.48 24718.96
BASE PIPE :- 48mm OD MS PIPE
LEG SUPORT :- 48mm OD MS PIPE
SEAT SUPORT:- 42mm OD MS PIPE
Arm & Paddle Bike SG-27
PRODUCT AREA :-L x W x H
SAFE PLAY AREA:- 1829mm x 1220mm
• Arm & Paddle Bike equipment made up of 3inch MS
pipe; Prime Stand duly bend, Foundation center pipe.
• The remaining frame is made of 42mm OD MS.
• MS Seat of size 380mm x 300mm x 5mm is used for
arrangement. arrangement.
• ϕ 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-
• Foundation plate of dia ϕ200mm and 8mm
thickness is welded
• All welded joint are of good quality.
• High quality rubber grip are also used for firm
• High tensile steel with galvanized nut & bolts to be
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap
HORIZONTAL BARS /SG-29
PRODUCT AREA :- L x W x H
4878mmx205mmx2439mm
7 SAFE PLAY AREA:-5460mmx4700mm Each 2.00 15611.68 31223.36
MAIN FRAME :-114MM OD MS PIPE
HANDLE FRAME:- 32MM OD MS PIPE
SEATING TWISTER /SG-20
PRODUCT AREA :- L x W x H
1560mmx1560mmx1310mm
SAFE PLAY AREA:-4520mmx4520mm
8 MAIN FRAME :-114MM OD MS PIPE Each 1.00 27319.60 27319.60
LEG FRAME:- 32MM OD MS PIPE
HANDLE FRAME:- 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004,BEARING NO.6304,
4b. CHILDREN'S PLAY EQUIPMENTS 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
MULTIPLAY SYSTEM-2 SP-93
Product Area: 6.7 M X 4.26 M
Safe Play Area: 8M x 6M
Spiral Slide - 8 Feet (H) & 20 Feet (L)
'Platform :- 2" x 0.5" MS Rectangular
Canopy on each platform.
A-B CLIMBER SP-90
Product Area:- 10ft x 2ft
Safe Play Area:- 13ft x 4.5ft
2 Product Height:- 6.5feet Each 3.00 26018.72 78056.16
Main Frame:- 32mm OD MS pipe
Rungs:- 25mm OD MS pipe
Color:- As per buyers' choice
CLASSIC ROPE WALL SP-86
Product Area:- 10ft x 1.5ft
Safe Play Area:- 12ft x 4ft
Product Height:- 9feet
Main Frame:- 2inch MS pipe
Good quality Nylon rope is assembled for
climbing with stopper ball
Color:- As per buyers' choice
RING CLIMBER SP-74
Product Area:- 12ft x 3ft
Safe Play Area:- 15ft x 5ft
Product Height:- 9feet
Stand:- 2inch MS pipe
Rungs Structure:- 42mm OD MS pipe
Rungs:- 25mm OD MS pipe
Color:- As per buyers' choice
JUNGLE JIM SP-79
Product Area:- 6ft x 6ft
Safe Play Area:- 9ft x 9ft
5 Product Height:- 8.5feet Each 5.00 31222.24 156111.20
Vertical Main Frame:- 42mm OD MS pipe
Horizontal Frame:- 32mm OD MS pipe
Color:- As per buyers' choice
FOUR SEATER SEA-SAW SP-63
Capacity:- 04 children
Product Area:- 8ft x 5ft
Safe Play Area:- 10ft x 7ft
Product Height:- 3ft
6 Stand:- 48mm OD MS pipe Each 6.00 13009.92 78059.52
Horizontal Frame:- 48mm OD MS pipe
Handle:- 25mm OD MS pipe
Bearing:- Bush Oiling Type
Seat:- FRP of thickness 4-5mm
TRIPLE ARCH SWING SP-47
Capacity:- 03 Children
Area:- 13feet x 4.5feet
Safe Play Area:- 15feet x 7feet
Leg Support:- 2inch MS pipe
Seat:- FRP seat 4-5mm thick
Bearing:- Sp. Forged Alloy Steel Casing
Suspension:-6mm Dia. Heavy Duty Chain
Top bar:-3inch MS. pipe
Diameter:- 4feet
8 Outer frame:- 32mm OD MS pipe Each 4.00 16912.56 67650.24
Handle:-25mm OD MS pipe
Center Pipe:- 2inch MS pipe
Platform:- FRP 4-5 mm thick
Bearing:- Heavy Duty Ball Bearing No.-6312
4c. MISC. ITEMS 0.00 0.00
CAST IRON BENCH SP-136
Age:- No age limit
Capacity:- 3 Adults
Area:- 1.52 mtr X 0.61 mtr . X 0.457 mtr
Height:-0.457 mtr
Length:- 1.52 mtr .
Width:-0.61 mtr .
Color:- According to customers
Seating arrangement of bench 2” x
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
BIG PENGUIN DUSTBIN SP-116
Height : 4 feet
Capacity : 60 Liter
3mm FRP Thickness
MONKEY DUSTBIN SP-119
Height : 4 feet
Capacity : 40 Liter
3mm FRP Thickness
KANGAROO DUSTBIN SP-123
Height : 5 feet
Capacity : 100 Liter
4m FRP Thickness
DUSTBIN TROLLEY SP-127
Product Details:
Minimum Order Quantity 1 Unit
Loading Capacity-50-100 kg
Material-FRP, Plastic, Stainless Steel, MS
Cart Size (mm X mm X mm)
Color: Black, Blue, Red, Green, Any
To satisfy the rising requirements of industry, we are engaged
manufacturing and supplying a wide gamut of FRP Dustbin
Trolley. These Dustbin Trolley are manufactured by our adept
professionals using the best
FOUR SEATER SEA-SAW SP-63
Capacity:- 04 children
Product Area:- 8ft x 5ft
Safe Play Area:- 10ft x 7ft
Product Height:- 3ft
6 Stand:- 48mm OD MS pipe Each 5.00 13009.92 65049.60
Horizontal Frame:- 48mm OD MS pipe
Handle:- 25mm OD MS pipe
Bearing:- Bush Oiling Type
Seat:- FRP of thickness 4-5mm
FRP TIGER SP-195
HIGHT : 0.762 mtr
SHAPE: TIGER (SEATED)
FRP REINDEER SP-196
HIGHT : 1.52 mtr
SHAPE: REINDEER
THICKNES : 6MMBearing:- Heavy Duty Ball Bearing No.-6312
FRP BIG BIRD SP-199
AHIGHT : 0.91 mtr
FRP SMALL BIRD SP-200
HIGHT : 0.762 mtr
water purifier cum Cooler
12 80 lit Water Purifier with candles NOs 1.00 104071.52 104071.52
120 lit Water cooler storge( 80lit/hr cooling capacity )
5 HORTICULTURE
1 Fine Dressing Of the Ground SQM 1928.00 2.13 4102.78
Anti termite treatment of lawn area through premise 30.50% I P.
one liter premise diluted in 499 liters water and applying solution
2 @ 1.00 litre solution per sqm lawn or bed area.(two application) CUM 96.40 8.06 777.37
i/c cost of chemical)and as per direction of officer-in-charge.and
as per direction of officer-in-charge.
Anti termite treatment by digging holes 30 cm deep and 4 cm
dia, 6 to 7 holes around the tree using chemical emulsion at the
rate of 1.5 liter per hole in two time or more application to get
the trees free from termite infection chemicals used
Chlorpyriphos 20% EC in the ratio of 1 concentration and as per
direction of officer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Preparation of beds for hedging and shrubbery by excavating
60 cm deep and trenching the excavated base to a further
depth of 30 cm, refilling the excavated earth after breaking
clods and mixing with sludge or manure in the ratio of 8:1 (8
parts of stacked volume of earth after reduction by 20% : one
part of stacked volume of sludge or manure after reduction by
8%), flooding with water, filling with earth if necessary, watering
and finally fine dressing, leveling etc. including stacking and
disposal of materials declared unserviceable and surplus earth
by spreading and leveling as directed, within a lead of 50 m, lift
up to 1.5 m complete (cost of sludge, manure or extra earth to
be paid for separately)
Supplying and stacking at site dump manure from approved
9 source, including carriage upto 5 km lead complete (manure CUM 578.40 255.10 147551.23
measured in stacks will be reduced by 8% for payment) :
Mixing earth and sludge or manure in the required proportion
specified or directed by the Officer-in-charge
Spreading of sludge, dump manure and/or good earth in
11 required thickness as per direction of officer-in-charge (cost of CUM 1156.80 31.00 35862.65
sludge, dump manure and/ or good earth to be paid separately).
Plantation of Trees, Shrubs, and Hedge at site i/c watering and
12 removal of unserveiceable material’s as per direction of officer 0.00 0.00
in charge (excluding cast of plant & water)
Trees Plant Each 370.00 4.24 1570.58
Shrubs Plant Each 1890.00 2.12 4000.75
Hedge Plant / Ground Cover Each 1050.00 1.41 1481.76
Digging holes in ordinary soil and refilling the same with the
excavated earth mixed with manure or sludge in the ratio of 2:1
by volume (2 parts of stacked volume of earth after reduction by
13 20% : 1 part of stacked volume of manure after reduction by Each 275.00 146.05 40163.20
8%) flooding with water, dressing including removal of rubbish
and surplus earth, if any, with all leads and lifts (cost of manure,
sludge or extra good earth if needed to be paid for separately)
Providing and laying Neelgiri/Mexican grass turf with earth
50mm to 60mm thickness of existing ground prepared with
proper level and ramming with tools wooden (Dhurmos) and
16 than rolling the surface with light roller make the surface SQM 1928.00 236.60 456164.80
smoothen and light waterning with sprinkler and maintenance
for 30 days or more till the grass establish properly, as per
direction of officer-in-charge.
SHRUB PLANTATION
Providing and Displaying Bougainvillea named variety, Sobhra,
Thima, Marry palmar, Cherry Blossom etc. well developed with
fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm
Cement Pot as per direction of the officer-in-charge.
Providing and displaying of Raphis Palm having ht. 75 cm to 90
cm with 15 to 18 equal suckers, well developed, full of fresh and
healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots &
as per direction of the officer-in-charge
Providing and stacking of Nerium oleander variegated of height
19 60-75 cm., multibranched in earthen pots of size 25 cm as per Each 250.00 39.03 9756.60
direction of the officer-in-charge.
Providing and stacking of Duranta Golden, having ht.15 to 20
cm bushty shape with fresh and healthy leaves in 15 cm size of
Earthen Pot/Plastic Pot & as per direction of the officer-in-
ORNAMENTAL SHRUB PLANTATION
Providing and stacking of Plumeria rubra of height 120-150 cm.
22 with 3-4 branches and thick stem in big size HDPE bags as per Each 70.00 130.09 9106.16
direction of the officer-in-charge.
Providing and Displaying Ficus Long Island topiary well
developed with fresh & healthy 5 to 6 ball specific size and
shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of
the officer-in-charge.
GROUND COVER PLANTS
Providing and stacking of Wedelia trilobata,full of leaves in 15
cm size of Poly bags & as per direction of the officer-in-charge.
Providing and stacking of Tradescantia, full of leaves in Earthen
25 Pot/Plastic Pot of size 15 cm. as per direction of the officer-in- Each 300.00 28.00 8400.43
Providing and stacking of Syngonium (Butterfly) variegated with
26 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 Each 550.00 266.68 146674.22
cm. as per direction of the officer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Providing and stacking of Bottle palm of ht. 270-300 cm bottom
26 girth 40-50 cm well developed in big HDPE bags as per Each 400.00 1040.70 416281.60
direction of the officer-in-charge.Each
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom
27 girth 35- 40 cm well developed in big size HDPE bags as per Each 400.00 455.31 182123.20
direction of the officer-in-charge.
Providing and displaying of Money Broad Leaves mounted on
moss stick 1.20 m ht., 5 to 6 s in each pot, well developed with
28 full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Each 300.00 275.52 82656.00
Bottom dia x 25 cm Perpendicular height Earthen pot/Plastic
pot & as per direction of the officer-in-charge.
Providing and fixing floating plant base including materials and
29 cost of all labour, T&P etc complete as per the direction of Each 50.00 593.60 29680.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
ABSTRACT ESTIMATE FOR CIVIL WORK FOR DEVELOPMENT OF SMART PARK, JEYPORE, KORAPUT ODISHA.
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
1a. TOILET BLOCK
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & filling foundation and plinth with sand well
2 watered and rammed including cost, cost of all labour, CUM 45.55 570.53 25990.17
carriage, royalty, taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
3 hoisting laying using concrete mixture and vibrators including CUM 4.97 5027.90 24978.63
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Footing & Pedestal CUM 2.54 5579.17 14143.19
* Plinth Beam CUM 1.25 5991.44 7459.34
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column & Roof Beam CUM 2.64 13696.93 36211.25
* Lintel Beam CUM 1.04 9604.67 9964.85
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
10 scafolding, curing etc. complete all Depth, height for outside SQM 52.08 230.96 12028.25
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
12 watering, curing cost, carriage, royalty, and taxes of all SQM 11.40 180.43 2056.92
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
13 making smooth to recive painting including cost of scaffolding SQM 113.48 132.38 15022.41
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints
15 over two coats of wall putty punning to the inside surface of SQM 61.40 88.26 5418.57
walls including, all cost of materials, labour, T&P, etc.
Providing & painting two coats with Weather coa paints over
16 two coats of wall putty punning to the inside surface of walls SQM 52.08 81.98 4269.73
including, all cost of materials, labour, T&P, etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Fixing glazzed tiles (30cmx30cm / 40cm x 40cm special
plain/printed series ceramic tiles of premium grade having
thickness 7 mm to 8mm confirming to IS 13755) in floors
17 treads or steps and landing on 20 mm thick bed of cement SQM 11.40 926.02 10556.58
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
mixed with pigment to match the shades of the tiles including
Fixing glazzed tiles (20cmx30cm / 20cm x 20cm special
plain/printed series ceramic wall tiles of premium grade having
thickness 6.5mm to 6.7mm confirming to IS 13753) in dados
skirting and risers of steps on 12mm thick cement plaster (1:3)
jointed with neat cement slurry mixed with pigments to match
the shades of the tiles including cost of tiles.
Fixing Kota stone in floors treads or steps and landing on 20
mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed
19 with neat cement slury mixed with pigment to match the SQM 14.50 1165.58 16900.97
shades of the tiles including rubbing and polishing complete
including cost of kota stone.
Fixing Kota stone in dados skirting and risers of steps on
12mm thick cement plaster (1:3) jointed with neat cement
20 slurry mixed with pigments to match the shade of the tiles SQM 1.95 1358.78 2649.63
including rubbing and polishing complete including all costs
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including
cost, conveyance, royalty and taxes of all materials,hire
charges of drilling machine and cost of all labour T&P required
for the work complete in all respect as per direciton of the
Engineer-in-charge.
Supplying, fitting and fixing of Stainless steel of 304 grade in
hand railing using 50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and
stainless square pipe bracing of size 32mm x 32mm x 2mm in
3 rows in stair case as per approved design and specification,
buffing, polishing etc with cost, conveyance, taxes of all
materials, labour, T&P etc. required for the complete in all
respect. A/R - 2006, Page 244 Item No.11
1b. GUARD ROOM
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & filling foundation and plinth with sand well
2 watered and rammed including cost, cost of all labour, CUM 7.02 570.53 4003.82
carriage, royalty, taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
3 hoisting laying using concrete mixture and vibrators including CUM 1.60 5027.90 8049.67
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Lintel Beam CUM 0.41 9604.67 3961.93
* Roof Slab & Chajja CUM 1.54 10064.43 15509.29
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
10 scafolding, curing etc. complete all Depth, height for outside SQM 41.15 230.96 9502.73
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
12 watering, curing cost, carriage, royalty, and taxes of all SQM 7.49 180.43 1351.44
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
13 making smooth to recive painting including cost of scaffolding SQM 78.64 132.38 10410.02
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with plastic imulsion paints
15 over two coats of wall putty punning to the inside surface of SQM 37.49 88.26 3308.72
walls including, all cost of materials, labour, T&P, etc.
Providing & painting two coats with Weather coa paints over
16 two coats of wall putty punning to the inside surface of walls SQM 41.15 81.98 3373.23
including, all cost of materials, labour, T&P, etc.
Supplying, fitting and fixing vitrified tile (Printed) in floors of
size 600mm x 600mm of approved make conformaing to IS :
13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4
17 course sand) and filling joints with white cement of approved SQM 6.25 1176.78 7354.90
quality including cost of all materials, labour T&P etc. required
for the work all complete as per direction of E.I.C. (For New
Fixing Vitrified tiles (size 600mmx600mm) (Printed) in dados
skirting and risers of steps on 12mm thick cement plaster (1:3)
18 jointed with neat cement slurry mixed with pigments to match SQM 1.56 1299.98 2027.97
the shade of the tiles including cost, carriage, cost of all labour
Fixing Kota stone in floors treads or steps and landing on 20
mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed
19 with neat cement slury mixed with pigment to match the SQM 0.45 1165.58 523.57
shades of the tiles including rubbing and polishing complete
including cost of kota stone.
Fixing Kota stone in dados skirting and risers of steps on
12mm thick cement plaster (1:3) jointed with neat cement
20 slurry mixed with pigments to match the shade of the tiles SQM 0.34 1358.78 458.59
including rubbing and polishing complete including all costs
Dressed seasoned sal wood (50mm. to 150mm. & above
2.75m. long.) work framed and fixed (wrought and put up) in
trusses, purlins, frames of doors, windows, ventilators and
Providing fitting and fixing of Flush door made out of 32 mm
thick block board including cost of all fittings and including
cost, conveyance, royalty and taxes of all materials,hire
charges of drilling machine and cost of all labour T&P required
for the work complete in all respect as per direciton of the
Engineer-in-charge.
Supplying, fitting, fixing up window (sliding type) made up
aluminium section 151-154, 151-155,aswindow frame Section
No. 151-155, 151-153 and 151-167 as shutter frame with 5mm
23 thick black glass as pannel fitted with rubber beading including sqm 1.44 6624.25 9538.91
locking arrangement including all fitting including cost of
materials all taxes of labour, T&P etc. complete asper
direction of E.I.C
1c. MAIN ENTRANCE
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & filling foundation and plinth with sand well
2 watered and rammed including cost, cost of all labour, CUM 6.21 570.53 3540.41
carriage, royalty, taxes, T&P etc complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
3 hoisting laying using concrete mixture and vibrators including CUM 0.97 5027.90 4887.12
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Footing & Pedestal CUM 2.62 5579.17 14603.47
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
RCC WORK INCLUDING SHUTTERING
* Column & Roof Beam CUM 1.05 13696.93 14394.62
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
9 scafolding, curing etc. complete all Depth, height for outside SQM 18.72 230.96 4323.52
wall as per drawing and Engineering-in-charge
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
10 watering, curing cost, carriage, royalty, and taxes of all SQM 6.95 180.43 1254.00
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Finishing surface of walls with Cement based wall putty &
11 making smooth to recive painting including cost of scaffolding SQM 25.67 132.38 3398.30
etc. with cost of all materials, labour T&P etc. complete.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with Weather coa paints over
13 two coats of wall putty punning to the inside surface of walls SQM 25.67 81.98 2104.53
including, all cost of materials, labour, T&P, etc.
Sipplying and fixing M.S Gate, Door & Window, railing made
out with ms flat, angle of approved design & specification
14 including cost of all materials, manufacture, and one coat of KG 640.00 170.35 109025.28
primer, all taxes T&P etc complete as per the direction of
Engineer-In-Charge.
Painting with Enamel paint of approved quality and shade over
surface with 2 coats over 1 coat of primer etc.
1d. BOUNDARY WALL -254M
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Filling foundation and plinth with excavated Earth inluding
watering and ramming
Supplying & filling foundation and plinth with sand well
watered and rammed including cost, cost of all labour,
carriage, royalty, taxes, T&P etc complete. ( Below Floor
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
4 hoisting laying using concrete mixture and vibrators including CUM 36.06 5027.90 181281.08
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
SUPER-STRUCTURE
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (Plinth Beam to Roof Level) CUM 7.68 13696.93 105166.73
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
16mm Inner wall plaster of ratio 1:6 including all necessary
10 scafolding, curing etc. complete all Depth, height for outside SQM 132.00 243.60 32155.20
wall as per drawing and Engineering-in-charge
12mm thick C.P. in C.M.(1:6) over brick masonary to the
smooth surface including watering, curing, cost, carriage,
royalty and taxes of all materials, cost of all labour, T&P etc
complete as per the direction of E.I.C.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with Weather coa paints over
13 two coats of wall putty punning to the inside surface of walls SQM 264.00 81.98 21643.78
including, all cost of materials, labour, T&P, etc.
Fencing with angle iron post placed at required distance
embedded in cement concrete blocks, every 15th post, last
but one end post and corner post shall be strutted on both
sides and end post on one side only and provided with
horizontal lines and two diagonals interwoven with horizontal
14 wires, of barbed wire weighing 9.38 kg per 100 m (minimum), SQM 330.00 21.95 7244.16
between the two posts fitted and fixed with G.I. staples, turn
buckles etc. complete. (Cost of posts, struts, earth work and
concrete work to be paid for separately). Payment to be made
per metre cost of total length of barbed wire used. ( DSR-
2021, CODE NO-16.18, PAGE NO-327)
Supplying at site Angle iron post & strut of required size
including bottom to be split and bent at right angle in opposite
direction for 10 cm length and drilling holes upto 10 mm dia.
etc. complete. ( DSR-2021, CODE NO-16.19, PAGE NO-327)
1e. FRONT-BOUNDARY WALL
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to o maximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Supplying & Filling foundation and plinth with excavated Earth
inluding watering and ramming ( Back Filling of Excavation)
Supplying & filling foundation and plinth with sand well
watered and rammed including cost, cost of all labour,
carriage, royalty, taxes, T&P etc complete. ( Below Floor
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
4 hoisting laying using concrete mixture and vibrators including CUM 12.22 5027.90 61461.10
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
* Column (UP to Plinth Beam top) CUM 1.36 13696.93 18619.26
* Plinth Beam length inner to inner CUM 6.00 5991.44 35948.64
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
SUPER-STRUCTURE
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
Brick work with Fly Ash bricks 23cm x 12cm x 8cm size
having crushing strength not less than 75Kg/cm2 with
dimensional tolerance ±8 percent in cement mortar (1:6) in
Foundation and Plinth including watering curing, cost of
carriage, royalty and taxes of all materials, cost of all labour,
T&P etc complete as per the direction of E.I.C.
C.C. (1:2:4) with 12mm and down grade C.B. chips approved
quality from approved quarry including hoisting, laying hire
10 charges of concrete mixture, vibrator, watering, curing and CUM 1.88 5998.16 11246.55
including cost, carriage, royalty, cost of all labour T.&P. etc
complete and as directed by E.I.C.
16mm Outer wall plaster of ratio 1:6 including all necessary
11 scafolding, curing etc. complete all Depth, height for outside SQM 260.25 230.96 60106.59
wall as per drawing and Engineering-in-charge
6 mm thick cement plaster (1:4) to RCC surfaces finished
smooth including closed deep chiping and slury treatment ,
12 watering, curing cost, carriage, royalty, and taxes of all SQM 30.63 180.43 5525.73
materials, cost of all labour, T&P etc complete as per the
direction of E.I.C.
Priming 1 coat with wall primer water bond cement primer
including all labour, materials, T&P etc. complete.
Providing & painting two coats with Weather coa paints over
14 two coats of wall putty punning to the inside surface of walls SQM 290.88 81.98 23847.10
including, all cost of materials, labour, T&P, etc.
Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors
treads or steps and landing on 20mm thick bed of cement
mortar 1:4 (1cement : 4sand) jointed with neat cement slury
15 mixed with pigment to match the shades of the tiles including SQM 216.00 2713.65 586147.97
rubbing and polishing complete including cost, carriage,
royalty & taxes of all material, cost of all labour T&P etc.
Sipplying and fixing M.S Gate, Door, Window, Grills &
Rectangular Section of approved design & specification
including cost of all materials, manufacture, and one coat of
primer, all taxes T&P etc complete as per the direction of
Engineer-In-Charge.(Taking 45.00kg for door window &
100kg for gate /Sqm & Taking Grill 15kg per SQM)
Painting with Enamel paint of approved quality and shade
over surface with 2 coats over 1 coat of primer etc.
Earth work in ordinary soil within 50 m. initial lead and 1.5 m
initial lift including ressing & breading clods to omaximum 5cm
to 7cm & laying in layers not exceding 0.3 M in depth & as per
direction of the Engineer-in-charge.
Disposal of moorum/building rubbish/ malba/ similar
unserviceable, dismantled or waste material by mechanical
2 transport including loading, transporting, unloading to CUM 824.64 388.08 320025.92
approved municipal dumping ground for lead upto 10 km for
all lifts, complete as per directions of Engineer-in-charge.
Supplying & filling foundation and plinth with sand well
3 watered and rammed including cost, cost of all labour, CUM 11.43 570.53 6521.14
carriage, royalty, taxes, T&P etc complete.
Cement Concrete (1:3:6) using 40mm size hard granite C.B.
metal approved quality from approved quarry including
4 hoisting laying using concrete mixture and vibrators including CUM 48.70 5027.90 244842.34
cost, carriage, royalty, cost of all labour T.&P. etc complete
and as directed by E.I.C.
RC.C. M-20 grade with 20mm and down grade b.h. granite
C.B. chips of approved quality from approved quarry including
watering, curing, cost, carriage, royalty & taxes of all materials
and labour, T&P etc complete.
Providing M.S. reinforcement for R.C.C. work including
cutting, bending, binding and tying the grills and placing in
position including cost of binding wire 18 to 20 gauge and cost
and carriage of steel. etc. complete.
P/F 60 mm thick factory made C.C interlocking paver Block of
7 M-30 grade made by block making machine over and i/c 50 CUM 184.40 829.70 152995.94
mm thick bed of C. sand, filling the joints.
2a. SANITARY & PLUMBING WORK
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Fixing water closet, squatting pan (Indian type W.C pan)
conforming to IS 2556 : Part 3-2004 duly embedded in cement
concrete (1:4:8) using hard granite metal 4cm nominal size
allcomplete as per specification.
White Glazed vitreous china Squatting pan- long pattern size
Fixing in cement mortar (1:3) a pair of white vitreous china
2 250mm x 130mm x 30mm foot rest for squatting pan water Each 3.00 165.17 495.52
closet as per specification
Fixing Wash Down Water Closet (European type W.C pan)
with integral ‘S’ or ‘P’ trapconforming to IS 2556 : Part 8-2004,
to the floor with wooden plug and chromium plated screws
including jointing the trap with soil pipe in cement mortar (1:1)
etc all complete as per specification. (Seat and cover to be
Providing and fixing P.V.C. low level flushing cistern with
4 manually controlled device (handle lever) conforming to IS : Each 4.00 1670.20 6680.80
7231, with all fittings and fixtures complete.
Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996
including connecting the urinal of430x260x350 mm or
5 340x410x265 mm sizes respectively with waste pipe by Each 4.00 12501.01 50004.06
means of white lead mixed with chopped hemp etc all
complete as per specification.
Fixing PVC automatic flushing cistern including cutting holes
and making good the same all complete as per specification.
Supplying , fitting , fixing of porcelein wash hand basin of size
450mm x 350 mm of CERA make, catalogue no Canon 1012
Wash Basin of Equivalent of Parryware/ Hindware with rog
7 bolts, CI brackets, hole for pillar cock with cast iron/ M.S. Each 3.00 2213.59 6640.77
brackets painted while including cutting holes in wall and
making good to the damages etc. all complete with materials ,
labour and T& P etc.
Supplying , Fitting , fixing of ( 600 x 450 mm ) Framed Mirror
mirror of superior glass mounted on 6mm thk A.C. sheet and
8 fixed to wooden plugs with cromium plated brass screws and Each 3.00 1099.62 3298.85
washers etc. all complete with materials , labour and T & P
9 Providing and fixing PVC soil waste and vent pipes 0.00 0.00
Supplying fitting , fixing of PVC floor traps of the following
norminal diameter of outlet of self cleaning design with sand
cast iron screwed down or hinged grating with or without vent
arm including cutting holes in walls and making good to the
damages etc. all complete with materials, labour and T& P
8 Providing and fixing PVC plain bend of required degree
Providing and fixing PVC single equal plain junction of
9 required degee with access door, insertion rubber washer
3mm thick, bolts and nuts complete .
Providing and fixing door piece, insertion rubber washer 3mm
thick , bolts & nuts complete .
11 Providing & fixing PVC terminal guard (i) 110 mm Each 4.00 67.20 268.80
Providing and fixing on wall face unplasticised Rigid PVC soil,
waste and rain water pipes conforming to IS : 13592 Type A,
including jointing with seal ring conforming to IS: 5382, leaving
10 mm gap for thermal expansion, (i) Single socketed pipes
Supplying, fitting, fixing to walls, ceiling and floor upplasticized
PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2)
13 th efollowing nominal diameter with fittings and clamps
includings testing all complete with materials labour and T & P
* a) 15mm dia nominal bore metre 30.00 92.51 2775.36
* b) 20mm dia nominal bore metre 15.00 128.46 1926.96
* c) 25 mm dia nominal bore metre 15.00 179.42 2691.36
* d) 32 mm dia nominal bore metre 5.00 131.15 655.76
* e) 40 mm dia nominal bore. metre 5.00 316.29 1581.44
14 Providing and fioxing brass bib cock of approved quality .
* (i) 15 mm nominal bore short body Each 12.00 921.08 11052.91
* (ii) 15mm nominal bore long body Each 3.00 1204.38 3613.14
Providing and fixing brass stop cock with wall flush of
approved quality .
* (i) 15 mm nominal bore. Each 2.00 771.89 1543.79
Providing and fixing gun metal gate valve with C.I. wheel of
approved qualioty ( screwed end)
* (i) 25 mm dia Nominal bore Each 1.00 625.44 625.44
* (ii) 32 mm dia Nominal bore Each 1.00 1266.89 1266.89
17 Sand Cast Iron S&S as per IS: 1729 (Gully Trap) Each 1.00 969.36 969.36
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supply all labour , materials and T & P and laying to level and
slope and jointing with cement mortar(1:1) for PVC pipes .
18 (Grade-A) of the following diametersas per specification al metre 5.00 1026.72 5133.60
complete (excluding earth work in trenches)(data for 30 mtr.)
(per mtr) S.W. Pipe 150mm dia.
Fixing Rotational moulded polyethylene cylindrical vertical
water storage tanks conforming to IS : 12701--1996 including
cutting holes through the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam nuts, fixing ball
valve etc, including hoisting upto a height of 5 metres above
ground level and placing the tank to the required position etc
all complete as per specification and direction
2000 litre capacity Double Layer Cylinderical Vertical water
* storage tanks Each 1.00 22308.92 22308.92
Labour for drilling a perfectly vertical bore hole of specified dia
for a specified depth below ground level through consolidated
and unconsolidated rock with down the hole hammer drilling
rigs or combination drilling rigs (1200 cfm/ 300 psi) as required
to suit the site condition as per the direction of Engineer-in-
charge including use of own rigs with its accessories, tools
1 and plant and consumables etc for lowering of 200 mm dia Mtr 150.00 1019.76 152964.00
PVC/GI pipes for housing fitted with socket and with or without
well screen as per the necessity for soft, medium, hard and
boulder formation (GI/PVC casing pipes if required to prevent
collapse of over burden is to be provided by the contractor
including lowering and withdrawing after completion of the
Lowering the following size G.I/ PVC pipes with or without
slotted pipes as per the necessity from ground level and fitted
and fixed up in perfectly vertical position, including cutting and
2 threading pipe and slotted pipe and supplying and fixing all
jointing materials, tools and plant etc. complete and keeping
the top of the casing pipe threaded including plugging tube
wells to prevent entry of foreign materials from above.
* Labour for lowering of 200 mm dia PVC/GI Casing Pipes
0 to 45 Mtrs. and above of Lowering Mtr 30.00 254.02 7620.48
Cleaning and developing the tube well using their own
compressor continuously worked till clear and adequate
3 discharge is obtained from the tube well including supply and 0.00 0.00
use of all necessary equipment and labour as per the direction
of Engineer-in-Charge.
* Labour for developing of tubewell No 1.00 9199.79 9199.79
Supplying all materials and labour, tools and plant and
providing sanitary sealing by cement concrete grouting of
annular space around GI/PVC/MS housing pipe upto 5 mtrs
below ground level (as per drawing) to plug the bore hole
4 excluding cost of cement all complete as per direction of
Engineer in charge. Minimum one metre of casing pipe to be
inserted in the bore into the rock at the bottom to ensure
sanitary sealing (excluding cost of cement which will be
supplied by the Department)
* Sanitary sealing upto 5 mtrs below ground level No 1.00 2385.60 2385.60
Supplying all materials, labour, tools and plant and
5 withdrawing casing pipes from the unsuccessful bore and
depositing in the departmental store in good condition.
* Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe Mtr 30.00 313.49 9404.64
Providing and fixing suitable size threaded mild steel cap or
spot welded plate to the top of bore well housing/ casing pipe,
removable as per requirement, all complete for borewell of
Providing and fixing brass full way 100 mm dia valve with C.I.
wheel of approved make, tested to a pressure of 21 kg/sqcm.
Providing and fixing 100 mm dia gunmetal non return valve of
approved make tested 21 kg / sqcm.
Providing and fixing GI pipe (heavy duty) confirming to IS
1239 with special fittings in external works including
9 earthwork, excavation in all kind of soil including refilling, RM 90.00 784.00 70560.00
painting pipes & fitting with two coats of anti corrosive paint
complete and all as directed by Engineer-in-Charge.
10 Providing and filling sand all around GI pipe in external work cum 20.00 570.49 11409.89
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Providing and installing submersible pump suitable for 8"dia
casing of bore with SS impeller, high tensile SS shaft, copper
wound squirrel cage wet type induction motor 2880 rpm, 415
V, 50 Hz, 3 Phase AC supply, conforming to IS: 8034-1976,
capacity 100 litre per minute at 70-120 m head along with
adireclty coupled submersible type squirrel cage electric
induction 12.5 HP motor suitable for operation on 400 V, 3
phase, 50 c.p.s AC supply, water lubricated bearings and
11 provided with pivoted segment type thrust bearings to LS 1.00 16651.26 16651.26
withstand non-vertical lead with minimum wear and tear and
duly fitted with device to take up the expansion of water with
heating of motor, including supply, testing and commissioning
of electrical panel from the same manufacturer, complete with
all accessories in all respects. The contractor to obtain
approval for model and make of pumpset & suitable Electrical
panel after having hield report of fully developed borewell and
submit acutal bore strata chart.
Insulated cable end termination along with its accessories
complete as required.
Also supply and making straight through joint heat shrinkable
type of size 4 x 4 sqmm copper
* Providing and laying 200 mm dia PVC pipe (Schedule-80) Mtr 30.00 2555.91 76677.22
3 ELECTRIFICAITON
E. I. WORK / INTERNAL ELECTRICAL WORK
Recessed wirring to light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLSH PVC insulated copper
conductor of ISI marked Make- RR
KABEL/POLYCAB/HAVELLS with 20 mm dia PVC flexible
non metallic conduit Make-AKG/KINJAL/POLYCAB with 6A
modular type switch ISI marked Make-Make-
Schneider(Clipsal X)/legrand( Arteor) /Havells (Crabtree)
1.0 /Panasonic (Vision), and ceiling rose ISI marked Make-
Anchor/Havells of modular type G.I box with cover Make-
Make- Schneider(Clipsal X)/legrand( Arteor) /Havells
(Crabtree) /Panasonic (Vision), of suitable size, modular box
with 1.5 sq. Mm FR PVC insulated single core multistandard
copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable for IPH
standard hospital.
Group control of point in Recessed wirring to light point/ fan
point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH
PVC insulated copper conductor of ISI marked
Make- RR KABEL/POLYCAB/HAVELLS with 20 mm dia PVC
flexible non metallic conduit Make-AKG/KINJAL/POLYCAB
with 6A modular type switch ISI marked Make-Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic (Vision),and
ceiling rose ISI marked Make- Make-Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision), of modular type G.I
box with cover Make-Make-Schneider(Clipsal X)/legrand(
Arteor) /Panasonic (Vision), of suitable size, modular box
with 1.5 sq. Mm FR PVC insulated single core multistandard
copper conductor as earth wire including all accessories and
connection as per direction of Engineer -in -Charge.
CATAGORY AS FOLLOWS ,complete suitable for IPH
standard hospital.(Maximum 02 nos point in one circuit)
Supplying,fixing of 6A Plug on the separate board with
complete fitting by 01 no of 6A switch & socket(modular type)
with suitable size modular box & cover including supplying of
all required accessories of ISI marked as approved as per
direction of engg-in-charge..Make-Make-Schneider(Clipsal
X)/legrand( Arteor) /Panasonic (Vision),
Supplying,fixing of 1x16A+1X 6A Plug on the separate board
with complete fitting by 02 no of 16A switch & socket(modular
type) with suitable size modular box & cover including
4.0 supplying of all required accessories of ISI marked as Nos 4.00 1195.04 4780.16
approved as per direction of engg-in-charge..Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic
(Vision),(For equipement power)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supplying,fixing of 1x16A Plug on the separate board with
complete fitting by 01 no of 16A switch & socket(modular
type) with suitable size modular box & cover including
5.0 supplying of all required accessories of ISI marked as Nos 4.00 963.20 3852.80
approved as per direction of engg-in-charge..Make-
Schneider(Clipsal X)/legrand( Arteor) /Panasonic
(Vision),(For equipement power)
Receass wiring for circuit/submain wiring with the following
mentioned size PVC insulated, copper conductor, single core
cable ( Polycab/RR/HAVELLS) or any other equivallent
6.0 reputed make ISI marked as approved, in recessed PVC
conduit Heavy duty of mentioned size (AKG/Polycab/Kinjal or
any other equivallent reputed make ISI marked as approved)
as required as per direction of Engg.-in-Charge..
2 nos single core 1.5 sq. mm copper wire for phase and
neutral and 01 no of single core 1.5 sq. mm copper wire for
earth continuty conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire for phase and
neutral and 01 no of single core 1.5 sq. mm copper wire for
ii) earth continuty conductor in 20 mm dia non metallic heavy Rmt 30.00 182.56 5476.80
duty flexible conduit.(BDB to LSB/LIGHT CKT/5A
PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 50 Sqm.mm POLYCAB/HAVELLS/KEI of following
size cables in ground including excavation,sand cushioning
protective covering and refilling the trench and as per
direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 25 Sqm.mm POLYCAB/HAVELLS/KEI of following
size cables in ground including excavation,sand cushioning
protective covering and refilling the trench and as per
direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 4 core 16 sq.mm Sqm.mm POLYCAB/HAVELLS/KEI
on surface as per direction of Engg.-in-Charge.
Supplying & laying of one number PVC insulated armoured
and PVC sheathed AL. conductor power cable of 1.1 KV
grade of 3 core 6 Sqm.mm POLYCAB/HAVELLS/KEI of
following size cables in ground including excavation,sand
cushioning protective covering and refilling the trench and as
per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I. pipe (medium
11.0 class) in ground complete with G.I fitting incl. trenching(75 mm
depth)and refilling as per direction of Engg.-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
S/I/T&Commissioning of LT indoor floor mounted cubical type
electrical main panel (for both light and power circuit) made
out by 2mm CRCA steel sheet duly derusted & pented by
simens gray powder cote paint is designed as G.A drawing as
per direction of Engg.-in-Charge.
In commer- 01 number of 250(160-200) Amps 3P MCCB with
encapsulated double break . (make-
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with axulary for BMS
Busbar- 04 numbers of 300Amps Electrolytic copper busbar
duly sleeved by color coaded PVC sleeve & supported by
suitable size DMC insulator.
12.0 Out going- (i) 63A 4P MCB 08 NOS FOR POWER BDB Set 1.00 237154.40 237154.40
(Legrand/Schneider make)or laundry washing machine motor
Out going- (ii) 08 nos 32A 4P MCB LIGHT BDB AC IDU
BDB/LIGHT BDB(Legrand/Schneider make) or laundry
washing machine motor.
Out going- (iii) 01 nos 100A 3P MCCB FOR RAW
POWER.(make- ABB/Siemens/ SCHNEIDER/ L&T/
Legrand,ISI marked).
Instrument- (i) 03 numbers phase indicating lamp with toggle
switch & HRC fuse.
(ii) 01 set of 0-200Amps Ameter with selecter switch &
(iii) 01 set of 0-500 voltmeter with selecter switch.(DIGITAL)
S/I/T & commissioning of sub feeder pillar with 40A 4P MCB
12.1 (10KA) as incomer,outgoings-25A DP MCB 10KA-6 Nos, with Set 1.00 20891.36 20891.36
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x
6 mm thick ISI marked including accessories and providing
13.0 masonary with cover plate having loccking arrangement and Set 5.00 7080.64 35403.20
watering pipe etc (WITH charcoal and salt) as required as per
direction of Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip on surface or
14.0 in recess for connections etc. as required as per direction of Rmt 50.00 476.00 23800.00
Engg.-in-Charge.
Providing and fixing 25mm x 5 mm copper strip ISI marked at
15.0 0.5Mtr below G.L as strip earth electrode. as required as per Rmt 50.00 536.48 26824.00
direction of Engg.-in-Charge.
Providing and fixing 4 mm dia copper wire on surface or in
16.0 recess for loop earthing as required.as per direction of Engg.- Rmt 80.00 117.60 9408.00
EXTERNAL ELECTRICAL WORK
Supplying & fixing of LED Spike Light for Monuments
17.0 Decoration Similar to JAQUAR/Havells/WIPRO/Bajaj with all Each 10.00 6660.64 66606.40
Supplying & fixing of LED Gate Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Supplying & fixing of 90watt Street/Flood Light Similar to
JAQUAR/Havells/WIPRO/Bajaj with all accessories.
Ceiling mounted indoor type batten type LED Luminaire with
LED lamp similar to Havells/WIPRO/Bajaj or equivalent.
S/I/T/C of exhaust fan of 300mm sweep 900 rpm in the
existing opening opening including making the hole to suit the
size of the fan ,making good the surface complate etc. as
22.0 S/I/T/C of 18W LED Bulb with Angle holder Each 8.00 929.60 7436.80
S/I/T/C of ceiling fan 1200mm sweep,including wiring the
down rods of standard length upto 300 mm with 1.5 sq.mm
FRLSH PVC insulated single core multistrand copper
conductor etc. as required.
Supply & fixing of LED POST TOP light similar to Cat No.
BGCS 40W LED WH with 3M GI Pole and accessories.
EARTHING 0.00 0.00
S/IT/C of materials and installation of pipe earth electrode
made out of 50mm dia class B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of G.I. flat / wire with G. I.
nut bolts & washers including cost of burnt wood charcoal,
salt, foreign soil, water pouring arrangements, brick masonary
enclosure on top with removable RCC cover complete with
labour for excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-charge.
S/I of safe earth electrodes (Chemical earthing) including cost
26.0 electrodes,earthing compound,excavation of earthing Nos 1.00 23520.00 23520.00
pit,refilling etc. as required (For Lightning protection system).
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Supply of materials and laying underground/floor/wall including
making end termination and testing of following sizes of G.I
27.0 earthing conductor for loop,earthing of equipments,switch
boards and panels as required complete and as directed by
Supply of materials and laying underground/floor/wall including
making end termination and testing of 8 SWG of G.I wire for
loop earthing of equipments,switch boards and panels as
required complete and as directed by EIC.
SAFETY EQUIPMENT
29.0 Supply and hanging of shock treatment chart duly laminated. Nos 3.00 683.20 2049.60
Supply and laying of 8 mm thick rubber mat,ISI marked of
S/I of 3 nos. Fire buckets painted with red & white colour on a
31.0 M.S. Stand complete as per specification and requirement of Set 2.00 1512.00 3024.00
Fire safety provisions.
S/I of 5 Kgs. Capacity CO2 type Fire extinguisher complete as
33.0 S/I 440 Volt Danger Board. Nos 3.00 134.40 403.20
34.0 Supply and fixing of 100mm dia GI pipe. Rmt. 12.00 728.00 8736.00
4a. OPEN GYM EQUIPMENTS
DOUBLE AIR WALKER /SG-02
PRODUCT AREA :- L x W x H
2340mmx785mmx1390mm
SAFE PLAY AREA:-4460mmx3700mm
MAIN FRAME :-90 MM OD MS PIPE
LEG FRAME:- 48MM OD MSPIPE & MS PLATE.
HANDLE FRAME:- 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004,MS NUT-BOLTS
PARALLER BARS /SG-04
PRODUCT AREA :- L x W x H
1770 mmx 680mm x 1525 mm
2.0 SAFE PLAY AREA:- 4500mmx4350mm Each 1.00 9107.28 9107.28
MAIN FRAME :-60MM OD MS PIPE
HANDLE FRAME:- 60MM OD MS PIPE
DOUBLE CHEST PRESSER /SG-07
PRODUCT AREA :- L x W x H
1675mmx782mmx2160mm
SAFE PLAY AREA:-3100mmx1850mm
3.0 CENTER PIPE :-114MM OD MS PIPE Each 1.00 33824.00 33824.00
SEAT FRAME :- 42OD MM MS PIPE
LEG FRAME:- 48MM OD MS PIPE
HANDLE FRAME:- 42MM OD & 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004, MS NUT-BOLTS
SINGLE WHEEL SHOULDER BUILDER /SG-13
PRODUCT AREA :- L x W x H
760mmx360mmx1674mm
4.0 SAFE PLAY AREA:-3240mmx3700mm Each 1.00 14310.80 14310.80
CENTER PIPE :-114mm OD MS PIPE
HANDLE FRAME:- 32mm OD & 25mm OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004, MS NUTBOLTS .
SIT UP BOARD/SG-16
PRODUCT AREA :- L x W x H
1378mmx590mmx1220mm
5.0 SAFE PLAY AREA:-3048mmx4350mm Each 1.00 12359.48 12359.48
BASE PIPE :- 48mm OD MS PIPE
LEG SUPORT :- 48mm OD MS PIPE
SEAT SUPORT:- 42mm OD MS PIPE
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Arm & Paddle Bike SG-27
PRODUCT AREA :-L x W x H
SAFE PLAY AREA:- 1829mm x 1220mm
• Arm & Paddle Bike equipment made up of 3inch MS
pipe; Prime Stand duly bend, Foundation center pipe.
• The remaining frame is made of 42mm OD MS.
• MS Seat of size 380mm x 300mm x 5mm is used for
arrangement. arrangement.
• ϕ 60mm seamless pipe bushes.
• Permanent lubricated Ball bearings 6205zz/6205-
• Foundation plate of dia ϕ200mm and 8mm
thickness is welded
• All welded joint are of good quality.
• High quality rubber grip are also used for firm
• High tensile steel with galvanized nut & bolts to be
• The Circlips to be used are of 25mm.
• Allen Bolts are also used to tighten the closing cap
HORIZONTAL BARS /SG-29
PRODUCT AREA :- L x W x H
4878mmx205mmx2439mm
7.0 SAFE PLAY AREA:-5460mmx4700mm Each 1.00 15611.68 15611.68
MAIN FRAME :-114MM OD MS PIPE
HANDLE FRAME:- 32MM OD MS PIPE
SEATING TWISTER /SG-20
PRODUCT AREA :- L x W x H
1560mmx1560mmx1310mm
SAFE PLAY AREA:-4520mmx4520mm
8.0 MAIN FRAME :-114MM OD MS PIPE Each 1.00 27319.60 27319.60
LEG FRAME:- 32MM OD MS PIPE
HANDLE FRAME:- 32MM OD MS PIPE
Mc SHAFT USED ,BEARING NO 6004,BEARING NO.6304,
4b. MISC. ITEMS 0.00 0.00
CAST IRON BENCH SP-136
Age:- No age limit
Capacity:- 3 Adults
Area:- 1.52 mtr X 0.61 mtr . X 0.457 mtr
Height:-0.457 mtr
Length:- 1.52 mtr .
Width:-0.61 mtr .
Color:- According to customers
Seating arrangement of bench 2” x
BIG PENGUIN DUSTBIN SP-116
Height : 4 feet
Capacity : 60 Liter
3mm FRP Thickness
MONKEY DUSTBIN SP-119
Height : 4 feet
Capacity : 40 Liter
3mm FRP Thickness
KANGAROO DUSTBIN SP-123
Height : 5 feet
Capacity : 100 Liter
4m FRP Thickness
DUSTBIN TROLLEY SP-127
Product Details:
Minimum Order Quantity 1 Unit
Loading Capacity-50-100 kg
Material-FRP, Plastic, Stainless Steel, MS
Cart Size (mm X mm X mm)
Color: Black, Blue, Red, Green, Any
To satisfy the rising requirements of industry, we are engaged
manufacturing and supplying a wide gamut of FRP Dustbin
Trolley. These Dustbin Trolley are manufactured by our adept
professionals using the best
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
FRP TIGER SP-195
HIGHT : 0.762 mtr
SHAPE: TIGER (SEATED)
FRP REINDEER SP-196
HIGHT : 1.52 mtr
SHAPE: REINDEER
THICKNES : 6MMBearing:- Heavy Duty Ball Bearing No.-6312
FRP BIG BIRD SP-199
AHIGHT : 0.91 mtr
FRP SMALL BIRD SP-200
HIGHT : 0.762 mtr
5a. LANDSCAPING
Uprooting rank vegetation and weeds by digging the area to a
depth of 60 cm, removing all weeds and other growth with
roots by forking repeatedly, breaking clods, rough dressing,
flooding with water, uprooting fresh growths after 10 to 15
days and then fine dressing for planting new grass, including
disposal of all rubbish with all leads and lifts.
2 Fine Dressing Of the Ground SQM 2600.00 2.13 5532.80
Supplying and spreading of sand in lawn area, including
watering, and dressing complete.
Anti termite treatment of lawn area through premise 30.50% I
P. one liter premise diluted in 499 liters water and applying
4 solution @ 1.00 litre solution per sqm lawn or bed area.(two SQM 2600.00 8.06 20966.40
application) i/c cost of chemical)and as per direction of officer-
in-charge.and as per direction of officer-in-charge.
Anti termite treatment by digging holes 30 cm deep and 4 cm
dia, 6 to 7 holes around the tree using chemical emulsion at
the rate of 1.5 liter per hole in two time or more application to
get the trees free from termite infection chemicals used
Chlorpyriphos 20% EC in the ratio of 1 concentration and as
per direction of officer-in-charge.
Preparation of beds for hedging and shrubbery by excavating
60 cm deep and trenching the excavated base to a further
depth of 30 cm, refilling the excavated earth after breaking
clods and mixing with sludge or manure in the ratio of 8:1 (8
parts of stacked volume of earth after reduction by 20% : one
part of stacked volume of sludge or manure after reduction by
8%), flooding with water, filling with earth if necessary,
watering and finally fine dressing, leveling etc. including
stacking and disposal of materials declared unserviceable and
surplus earth by spreading and leveling as directed, within a
lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure
or extra earth to be paid for separately)
Supplying and stacking of good earth at site including royalty
7 and carriage upto 5 km lead complete (earth measured in CUM 520.00 444.45 231113.79
stacks will be reduced by 20% for payment).
Mixing earth and sludge or manure in the required proportion
specified or directed by the Officer-in-charge
Spreading of sludge, dump manure and/or good earth in
required thickness as per direction of officer-in-charge (cost of
sludge, dump manure and/ or good earth to be paid
Spreading of sludge, dump manure and/or good earth in
required thickness as per direction of officer-in-charge (cost of
sludge, dump manure and/ or good earth to be paid
Plantation of Trees, Shrubs, and Hedge at site i/c watering
11 and removal of unserveiceable material’s as per direction of
officer in charge (excluding cast of plant & water)
* Trees Plant Each 30.00 4.24 127.34
* Shrubs Plant Each 777.00 2.12 1644.75
* Hedge Plant / Ground Cover Each 3500.21 1.41 4939.50
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
SL NO. ITEM DESCRIPTION UNIT QTY RATE AMOUNT
Digging holes in ordinary soil and refilling the same with the
excavated earth mixed with manure or sludge in the ratio of
2:1 by volume (2 parts of stacked volume of earth after
reduction by 20% : 1 part of stacked volume of manure after
reduction by 8%) flooding with water, dressing including
removal of rubbish and surplus earth, if any, with all leads and
lifts (cost of manure, sludge or extra good earth if needed to
be paid for separately)
* Holes 90 cm dia, and 90 cm deep Each 30.00 160.27 4808.16
* Holes 45 cm dia, and 45 cm deep. Each 807.00 20.94 16901.81
Grassing with selection No. 1/ Doob grass including watering
and maintenance of the lawn for 30 days or more till the grass
lawn, free from weeds and fit for mowing including supplying
good earth, if needed (the grass and good earth shall be paid
for separately).
Providing and stacking of Bottle palm well developed in big
HDPE bags as per direction of the officer-in-charge.
Providing and stacking of Foxtail palm well developed in big
size HDPE bags as per direction of the officer-in-charge.
SHRUB PLANTATION
Providing and Displaying Bougainvillea Named Varieties
Glabra, Peruviana, Spectabilis etc. well developed with fresh
& healthy bushy plant in full bloom in Poly- Pot as per direction
of the officer-in-charge.
Providing and displaying of Raphis Palm having ht. 75 cm to
90 cm with 15 to 18 equal suckers, well developed, full of
fresh and healthy leaves from bottom to top in 35 cm PVC
Pots/C.Pots & as per direction of the officer-in-charge
Providing and stacking of Nerium oleander variegated
18 multibranched in Poly- pots as per direction of the officer-in- Each 12.00 39.03 468.32
Providing and stacking of Tecoma gaudichaudi of height 90-
19 105 cm.,bushy in big size HDPE bag as per direction of the Each 10.00 143.14 1431.36
officer-in-charge.
Providing and stacking of Duranta Golden, having ht.15 to 20
cm bushty shape with fresh and healthy leaves in 15 cm size
of Earthen Pot / Plastic Pot & as per direction of the officer-in-
ORNAMENTAL SHRUB PLANTATION
Providing and stacking of Allamanda cathartica of height 30
cm to 45 cm.in 20 cm size of Earthen pots / Plastic pots & as
per direction of the
officer-in-charge.
Providing and Displaying Acalypha twisted well developed
22 with fresh & healthy in Earthen Pot/ Plastic Pot as per Each 199.00 100.02 19903.18
direction of the officer-in-charge
GROUND COVER PLANTS
Providing and stacking of Wedelia trilobata, full of leaves in
Poly bags & as per direction of the officer-in-charge
Providing and stacking of Tradescantia, full of leaves in
24 Earthen Pot/Plastic Pot of size 20 cm. as per direction of the Each 1200.00 28.00 33600.00
officer-in-charge.
Providing and stacking of Syngonium sp. variegated with
25 healthy foliage in Earthen Pot/Plastic Pot as per direction of Each 1100.21 266.68 293407.79
the officer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2022.09.19
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT71.pdf
Tender Document
BOQ.pdf
Tender Document
SCC.pdf
Tender Document
MAKE LIST.pdf
Tender Document
Physical Milestone.pdf
Tender Document
Plan Drawinga.pdf
Tender Document
Signed IP.pdf
Tender Document
GCC CONTRACTING.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .