Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.3 LAccepted-AOC | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹44.1 L+₹9.6 L (27.9%)Rejected-Finance NO 1 MOSQUE KANTHADHAR P O ICHAPUR NAWABGANJ DIST 24 PARGANAS NORTH PIN 743 144 WEST BENGAL | ICHAPUR | 24 PARGANAS NORTH | WEST BENGAL | 743144 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹46.4 L+₹11.9 L (34.5%)Rejected-Finance | 3 | Rejected-Finance Not L1 Bidder |
Tender Value
₹34.7 L
EMD Value
₹69,400
Closing Date
5 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
PROVN OF 3 X TWO WHEELER CYCLE SHED AT VARIOUS PLACES PROVN OF FOOTPATH IN FRONT OF LAKE BEHIND PIRABABA ADDN/ALTN TO GP NO 2 BUILDING NO 52 NEAR GATE NO 02 AND CERTAIN MINOR WORKS AT KANKINARA UNDER GE NORTH KOLKATA
2022_MES_536547_1
8174/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
KANKINARA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹69,400
Yes
11 Aug 2022
8 Jul 2022
6 Aug 2022
9 Jul 2022
5 Aug 2022
22 Jul 2022
Amount
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.
Excavation in trench, n. exc 1.5m wide and n. exc 1.5m in depth for foundation etc. and getting out in soft/loose soil complete all as specified and as directed.
M & L for returning, filling in, including spreading, levelling, watering, and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed
M & L for removing excavated material n exc. 50 m and depositing where directed surplus soil at a level n exc 15 m above the starting point complete all as specified and as directed
Materials and labour for PCC (1:4:8) type D2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed.
Materials and labour 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate in pavings complete all as specified and as directed.
Materials and labour for brick work with subclass 'B' brick; old size brick, straight or curved on plan, exceeding 6m mean radius, built in cement mortar (1:6), complete all as specified and as directed.
Materials and labour for brick work with subclass 'B' brick; old size brick, straight or curved on plan, to any radius, in half brick thick walls built in cement mortar (1:4), complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified & directed.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified & directed.
M & L for hard core of broken stone or boulder of gauge n exc. 63mm deposited spread and levelled in layers n exc. 15cm thick , watered and rammed to a true surface complete all as specified and as directed
M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed
Excavation in post holes(or similar holes) in soft/loose soil each n exe 0.50cum,getting out,returning fiiling in and ramming earth or broken rubble mixed with earth around , in layers not exe 25cm, watering and removing surplus soil toa distance n exe 50m and making good surfacecomplete all as specified and as directed
Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed
Supply and fix Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in roof coverings,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed
Supply and fix Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in ridges,600mm girth,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L Chequered cement concrete tiles 30cmx30cm25mm thick over 20mm thick screed bedding layer of mortar in CM(1:6) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors, complete all as specified and as directed
Supply and fix anodized aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm ling and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and directed.
Supply and fix of 6 mm thick high pressure steam cured non asbestoes fibre cement designer ceiling board of size to suit grid mould (605x605 mm as specified above) and fix in grid mould with necesssary fixing arrangement as per manufacter's instruction complete all as specified and as directed. (Make : Everest/Rhino/Charminar)
Supply & fix Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
Supply & fix Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed.
Supply & fix 9 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to frame work complete all as specified and as directed.
Supply & fix 4.80 mm thick Sheet glass,ordinary quality and glazing with oil putty in square or rectangular exc 0.5 sq. m in each pane complete all as specified and as directed.
Supply & fix 4.80 mm thick Sheet glass,ordinary quality and glazing with oil putty in square or rectangular n exc 0.5 sq. m in each pane complete all as specified and as directed..
Supply & fix Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and as directed.
Supply & fix Aluminium anodised,barrel tower bolts of 150 mm long, extruded section and fixed complete all as specified and as directed..
Supply & fix extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed.
Supply & fix Aluminium alloy, anodised,sliding door bolt 200 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed..
Supply & fix brass four lever Mortice lock,vertical type, size 75 mm complete all as specified and as directed..
Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed
Material and Labour applying two coats of synthetic enamel paint, first quality, over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed .
Material and Labour Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed .
Dismantling Asbestos cement / Transluscent ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .
Supply and fix Plain galvanised mild steel sheeting 1 mm thick as in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gm/Sqm fixed withr the building structure. complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed..
Supply and fix in repair 110 mm bore UPVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified .
Supply and fix in repair 110 mm bore UPVC (SWR) bend , any radius complete all as specified and as directed...
Dismantling framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed..
Supply and fix MS Rolled section as in main and cross beams, hip and jack rafters , purlins where connected to common rafters with angle cleats or other connecting plates conforming to Fe 410-W( Gde-E-250) Quality-A complete all as specified and as directed.
Demolition of Brickwork built in cement mortar, laid dry complete all as specified and as directed..
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc.complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface even and smooth including preparing newly plastered surfacesof walls and apply three coats of white wash complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Supply only integral water proofing liquid admixture for concrete and mortar. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper, first quality over a coat of alkali resistant primer complete all as specified and as directed.
Complete removal of existing treatment on old wall surface and material and labour for applying two coat of oil bound distemper, first quality, . complete all as specified and directed.
Material and labour for preparation of new treated plastered surfaces of wall and applying two coat of cement base paint , first quality,including prepration. complete all as specified and as directed.
Complete removal of existing finish on wall surface and Material and labour for applying two coat of cement base paint, first quality, in old wall surface including prepration. complete all as specified and as directed.
Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc ) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified & as directed .
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of size 400x400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.
M&L for chequered cement concrete tiles 20 cm x 20cm x 25mm thick over 15 mm thick screed bed in CM 1:6 over 40 mm thick PCC type B-1 1:2:4 (using 20mm graded aggregate) set, jointed and pointed in neat cement slurry in floors with grey cement and pigment
M&L for 50 micron polythene sheet laid on floor complete all as specified and directed.
M&L for providing 40 mm thick cement concrete type B-1 1:2:4 using 20 mm graded aggregate as in floor, finished to the surface even and smooth with using extra cement complete all as specified and directed.
Material and labour for PCC 1:3:6 Type C2 75 mm thick (using40 mm graded aggregate) as in plinth protection, complete all as specified and directed.
Material and labour for forming 12 mm thick expansion joints filled with pre formed bituminous filler and top 30 mm primer and sealed with sealing compound grade A complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed
Use and waste of formwork to sides and soffits of beams, lintels, floors, shelves etc. for rough finished concrete surfaces complete all as specified and as directed.
M&L for providing precast cement concrete (1:2:4) type B-1 set in CM 1:6 in window or door cills lintels bressumers, steps, quoin block (for use with masonry ), string courses, coping kneelers, apex stones, piers caps, columns, posts boudary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as req & welding with existing bar complete all as specified & dir
Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrup, spacers and binder, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Taking down chowkhat with shutter n.exc. 1.50 Sqm each (without taking off shutter from the frames.) complete all as specified and as directed .
All as per item No 63 above but exc. 1.50 & n.exc. 4.00 Sqm each complete all as specified and as directed .
M&L Plain, solid, straight chowkats and frames of 2nd class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed .
Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as specified and as directed .
Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.
Supply and fix 30 mm thick 2nd class hard wood factory made glazed and skeleton door shutter, open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc, the size of member of shutter as specified in SSR Part 1. complete all as specified and as directed.
S&F small fitting such as window / doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc 200 cu.cm each, complete all as specified and as directed. (50 mm butt hinges shall be measured and paid separately under supply only rate).
Supply only butt hinges of 50 mm size,medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Supply and fix 250mm long aluminium anodised, sliding door with hasp staple (both type) and fixing clips of sheet, cast or extruded section complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint , first quality,over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.
S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle and peg stay without glazing bars complete dovetailed or welded including one shop coat of red oxide primer complete all specified.
Supply and fix framed work such as grills, gratings etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings framework of water tank and similar work conforming to Fe 290 G-E-165 complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane for Metal frame complete all as specified & directed.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and average of width of apreature 1.40 mm fixed with stainless wire staples with steel wire staple with steel/wooden window and door. complete all as specified & directed.
Dismantling Boarding of any description fixed in any position with nails complete all as specified .
Supply and fix 12 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination including 6mm thick teak wood lipping, fixed with screws as in pelmet box with necessary fixing etc. complete all as specified and as directed.
Supply and fix curtain rod, 25mm dia of fancy type anodised aluminium alloy with fixing brackets, stops, rollers etc. as in door and windows curtains etc all as specified and directed
Supply and fix fancy type brass chromium plated drapery curtain rod bracket complete all as specified and directed.
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 1.5 sqmm and one run of 1.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes all as specified and directed (Note : (i) Two run of 1.5 sqmm cable one run of 1.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes all as specified and directed (Note : (i) Two run of 2.5 sqmm cable one run of 2.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes all as specified and directed (Note : (i) Two run of 4 sqmm cable one run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Supply and fixing, commissioning, testing XLPE insulated PVC sheathed armoured heavy duty electric cable with aluminium conductor for working voltage upto and including 1100 volts, in duct / fixed to pole, wall/roof with fixing material such as clamp, GI wire to be fitted with shed/ wall with suitable size of clamp/ GI wire and make good including cable glands and aluminium thimble of suitable size for making connection of size 16 sqmm 4 core complete all as specified and directed by Engr-in-charge.
Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all as specified and directed
Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed
Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete complete all as specified as directed.
Supply and fix triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amp sheet steel enclosure fitted with plug & socket metal clad box including insulated neutral link, adjustable DIN rail channel and connecting links complete complete all as specified as directed.
Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way complete all as specified as directed.
Supply and fix MCB TPN 40 to 100 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.
Supply and fix Blanking plate for MCB DB complete all as specified as directed
J.S. Construction
Odessa Engineering Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .