PROVN OF 04 TOILETS AT AF STN BAMRAULI

Amount

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed

Excavation in trenches for n.exc 1.50m wide not exceeding 10 Sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out all as sfd and directed.

M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified.

M&L for PCC 1:4:8 type D2 graded stone aggregate cement concrete in flooring, foundation, filling and mass concrete all as sfd and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as sfd and directed.

M&L for RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L for RCC M-25 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.

Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

M&L for rendering 5mm thick in CM 1:3 finish even and smooth without using extra cement in ceiling complete all specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for preparation of new plastered ceiling surface and applying three coat of white wash of ceiling all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats distemper over a coat of primer birla white wall care putty on wall to obtain smooth finish complete all as specified and directed.

All as per item No 18 above but two coat fo weather proof paint (Exterior emulsion paint) in camouflage pattern over one coat wall putty of minimum 1.5 mm thick using Mechanical means (two or more combination). design, pattern and colour shall be as approved by GE or as per existing complete all as specified and directed.complete all as specified and directed.

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick, in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays all as specifed and directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified.

S&F solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube all as specified and directed including making good to the surfaces.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks cover (cylindrical vertical with closed top) fixed in position all as specified and directed

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 15mm complete all as specified and as directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed

S&F Towel Rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) complete all as specified and as directed.

S&F grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S&F Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15 mm Bib tap with wall flange chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S&F brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed. Note:-(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately.

S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 300 mm length

S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F Aluminium handles, 150mm fabricated type anodised

M&L for rendering 10mm thick rendering in CM 1:4 over concrete surfaces of roof mixed 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including surfaces finished even and fair without using extra cement complete all as spd and directed. note: Liquid water proofing compound paid seperately.

M&L for Liquid water proofing compound

M&L for Pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in manhole cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.

M&L for fly ash brick using old size brick straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6) complete all as specified (Molular Bricks) complete all as specifed and directed.

DWC (double wall corrugated) HDPE pipes 150mm bore laid and jointed on concrete bed complete. Including testing all as specified.

Concrete bed to drain pipe 150mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate). (UNSV Pipe through away Low laying area)

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150mm Dia complete all as specified and directed. ( Note : Work in Foule Position )

M&L for Septic tank, for 10 users exc. In ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab covers incl RCC precast manhole cover having 6 mm plate embedded all sound/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc. complete for 10 users.

M&L for Soakage well excavation in ordinary soil foundation on PPC 1:3:6 walls of honeycombed and solid in M25 concrete including intercepting chambers, screen chambers, brick work in CM , RCC cover slab in M25 /RR masonry /filling with brick bats complete of size 1.2 mtr dia 3 m deep including vent pipe. (25 users)

M&L for chequered cement concrete with tiles of size 30cm x30cm x 25 mm and 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F Mild steel round bars 8mm dia and over, cut to length, bent to shape required, including ranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250)Part- I quality-A orFe 290 (Gde -E-165

Extra for forming finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc (inner grith only to be measured for payment)

M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No. 66 above but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

S&F Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specified and as directed.

S&F ceiling rose surface backlite 65x50mm 3 terminals complete.

S&F lamp holder PVC body with back plate complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED Light fitting 1x12 watt bulkhead luminaire including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

S&F factory made epoxy powder coated distribution board SPN 04 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

S&F MCB single pole 240 volt 'B' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.

S&F MCB single pole & neutral 240 volt 'C' curve 10 KA 25 to 32 Amps complete all as specified and directed .

M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

S&F exhaust fan steel body, heavy duty, double ball bearing, Copper wounded complete with louvers shutter, 230 volt AC, single phase, 50 Hz, 1400 RPM, 300 mm sweep with blades, steel frame complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 250 mm sweep, single phase, 230 Volts AC,1200 RPM, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed,

Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface complete all as directed by Engr-in charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, buried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate opt less attn. 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel, wire mesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways, with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Disconnecting & dismentling of damaged/unsv cable any type/ make and supply & laying (in repair) cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor using lugs/ferrul both end of cable and testing complete all as directed for following size:-

10 Sqmm 4 core

Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and directed

Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete alll as specified and directed.

S&F in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40 mm dia complete all as specified and directed.

M&L (in replacement) for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all specified and directed.

Supply and laying in trenches GI tubing medium grade with all fittings as required of following sizes all as specified and directed.

25 mm bore

S&F gun metal valve with iron wheel head screwed both end ISI marked class-II for pipe of following sizes complete all as specified and directed.

25 mm bore

Cutting the existing GI line of 100 mm bore in position for insertion of GI tee 100x100x50 mm including excavation and earthwork complete.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

Abhinav Builders

R.K.ASSOCIATES

chauhan construction