Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹30.7 L+₹1.3 L (4.37%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹33.8 L+₹4.4 L (15.1%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹34.9 L+₹5.5 L (18.6%)Rejected-Finance PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹37.0 L+₹7.7 L (26.1%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (CENTRAL) DELHI CANTT-10
GE (CENTRAL) DELHI CANTT-10
INTERNAL PERIODICAL JOINERY FLOOR PLASTER AND CERTAIN CONNECTED BR WKS OF SANJAY VIHAR APS COLONY OLD AND NEW SIGNAL ENCLAVE AND OTHER ADJOINING AREAS OF AGE BR II UNDER GE CENTRAL DELHI CANTT10
2022_MES_548180_1
GE/C-48/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (CENTRAL) DELHI CANTT-10
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (CENTRAL) DELHI CANTT
₹90,000
Yes
3 Oct 2022
27 Aug 2022
26 Sept 2022
27 Aug 2022
23 Sept 2022
10 Sept 2022
27 Aug 2022 - 15 Sept 2022
Amount
Demolition of brick work built in cement mortar in any description and position, upto G+5 storey bldg complete all as specified..
M & L Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 upto G+5 storey bldg complete all as specified.
All as per item No 2 here-in-before but except bricks, all complete all as specified and directed.
Taking down cement plaster in any thickness from brick or stone etc including raking out joints, hacking for key, scrubbing down with water etc upto G+5 storey bldg complete all as specified.
M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.upto G+5 storey bldg complete all as specified.
M &L Preparation of newly plastered surfaces of walls and applying two coats of Oil bond distemper over a coat of primer, complete all as specified and as directed.
M&L for Preparation of newly plastered surfaces of walls and applying two coats of weather Exterior emulsion paint on walls/ceilings complete all as specified and directed.
Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatment etc and applying two coats of weather Exterior emulsion paint on walls/ceilings up to G+5 storey bldg complete all as specified
M & L for Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots complete removal of existing treatment etc and applying one coat of Acrylic washable distemper on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, up to G+5 storey bldg complete all as specified.
All as per serial item No. 9 above, but two coats of Acrylic washable distemper, complete all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces of wall by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of alkali resistant primer over already prepared surfaces of walls applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall whereever required for preparaing the surface even and smooth and providing two coats of Oil Bound Distemper on wall surface using roller brush complete all as specified and directed by Engineer-in-Charge.
M & L for Preparing old decorated plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spots etc and applying two coat of white wash on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, up to G+5 storey bldg complete all as specified.
All as per serial item No. 12 above, but on ceiling, complete all as specified and directed.
M&L for applying of wall care putty on newly/old plastered walls of 1-2 mm thick surface with even and smooth complete all as specified and directed. (Note : Wall putty to be procured from manufactures directly)
M & L for Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified.
M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, upto G+5 storey bldg complete all as specified.
Welding in repairs of old/broken steel windows/door shutter exc 2.50 cm but n. Exc. 5.00 cm in length and thickness of metal exc 6mm but n.exc 9mm complete all as specified.
Refixing shutters of any description exc 1 sqm but n.exc 2 sqm each after easing and repair for adjustments etc in the same opening., complete all as specified.
Taking down shutter exc 1 sqm but n.exc 2 sqm each of any description complete all as specified.
Taking down chowkats or frames not exc. 1.5 sqm each (with shutter without taking off shutter) complete all as specified.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (with shutter without taking off shutter) complete all as specified.
M&L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including treating the back of chowkhat with two coat of black japan/bituminiuos paint complete all as specified and directed.
S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face panel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. Note :- Rate quoted are deemed to be inclusive of fixture and fittings mentioned to each door shutter and painting.
S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, paneled shutter with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides (incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one door stopper140mm long extruded aluminium and one no 300 mm long Aluminum Sliding door bolts and two coats synthetic enamel paint along with one coat of pink primer), complete all as specified and directed. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
M&L for 35 mm thick 2nd class hard wood glazed and Skelton door shutter, factory made, open rebated and prepared to receive glass/gauge etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitered beads for securing glass/gauge etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat(incl two nos 150 mm long extruded aluminium tower bolts, three nos 100mm long medium weight MS butt hinges, two nos 150 mm long extruded aluminium handles, one stopper and one no 300 mm long Aluminum Sliding door boltsand two coats synthetic enamel paint along with one coat of pink primer) complete all as specified and directed. Note :- Rate quoted are deemed to be inclussive of fixture and fittings mentioned to each door shutter and painting.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, complete all as specified and directed.
S&F 4.00 mm thick plain sheet glass with wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane, Inc hacking out used glass panes complete all as specified.
S&F solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Supply & Fixing in opening, complete all as specified
S&F factory made solid PVC moulded door shutter 28 to 30 mm thick(stile) with 2, 4 or 6 raised pannel design with two mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame with particle board core as per specification and drawing complete.
S&F 25 mm thick flush shutter solid core construction with block board core and ply wood face panel commerical type on both side to be fixed as shutter of cupboard/kitchen cup board/loft board including two coats of synthetic enamel paint over a coat of pink primer incl taking down existing shutter complete all as specified and directed.
S&F butt hinges medium weight, cold rolled mild steel and fixed size of hinge 100mm complete all as specified.
S&F 100mm long anodised aluminum barrel tower bolt, extruded section complete all as specified.
S&F aluminum alloy handles extruded fabricated type, anodised of 125 mm size complete all as specified.
S & F MS helical door spring 150 mm in repair complete all as specified.(Make-Ritz)
S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.
S&F Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified and directed
(a) Dismantling of floor of WC with Indian type Water closet and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc all as specified and directed.
(b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M & L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top@Seal – 107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-1 and top coat with Sika Top® [email protected] Kg/Sqm or equivalent of Fosroc or Pidilite. (d) M & L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete Plus as specified . (e) M & L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.
(g) The area of Each WC portion is n.exc 2.00 Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note :- Water closet shall be measured & paid separately under relevant itmes
S&F in repair vitreous china, squatting pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flushing pipe) including provision of lean concrete bedding connection to drain out pipe to flush pipe and anti syphonage pipe etc including making good to floor where required upto G+5 storey bldg complete all as specified.
Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land. upto G+5 storey bldg complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
M&L for 595mm to 605mm x 595 mm to 605 mm x7-8 mm rectified coloured ceramic tiles, joint free, as approved by Garrison Engineer in floors over 15mm thick screed bed in CM 1:6, G+5 storey bldg complete all as specified.
M&L for 595 mm to 605 mm x 100 mm x 7-8 mm thick rectified coloured tiles as skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 G+5 storey bldg complete all as specified.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match laid over and including 15mm thick screed bed or bedding layers in cement mortar ( 1:6) G+5 storey bldg complete all as specified.
M&L for coloured glazed ceramic tiles 300x450x6 to 8mm or (300x600mm)x8 to 10mm thick on vertical surfaces on skirting /dados and risers to steps laid and over including rendering 10mm thick cement mortar in CM 1:4 G+5 storey bldg complete all as specified.
M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring G+5 storey bldg complete all as specified.
S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old pipes and necessary cutting through RCC roof and brick work etc and making good all as specified.
S&F of 110mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified.
Taking up or down 20 mm GI tubing medium grade with all fittings and connections incl cleaning for refixing or removal to store complete all as specified.
All as per item no.48 here-in-before but dia of GI pipe is 15mm.
S&F 20mm dia GI tubing medium grade with all fittings and connections fixed to wall or ceiling or laid on floor etc incl cutting chasing where required complete all as specified an directed.
All as per item no.50 here-in-before but dia of GI pipe is 15mm.
Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and directed.
S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4"/ 6", Reducer, Plug, Tank connection of 1/2" in existing pipe line of 15 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.
S & F in repairs GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, Tank connection of 3/4" in existing pipe line of 20 mm dia without taking down of pipe line in any position/situation complete all as specified and directed by Engineer-in-Charge.
Disconnecting existing tanks of exc 250 ltr and n exc 500 ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position all as specified
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position with 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule Minimum wt 20mm-210grm and s&f in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed incl Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type incl complete all as specified and directed.
M& L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic including demolition of existing surface all as specified and disposing to debries etc all as directed by Engr-in-Charge.
S&F in repair CI floor trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) dia of out let 75mm complete all as specified and directed by Engineer-in-Charge.
S & F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete all as specified and directed by Engineer-in-Charge.
S & F in repairs vitreous chinaware coloured wash hand basin of size 580mm x 450mm complete including , CP Waste coupling , PVC waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge
S&F in repair vitreous china squatting pan of orissa pattern long pan size 510 x 400 mm white with "p"or "S" trap front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed by Engineer-in-Charge.
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.
S & F in repair fancy type 125mm size square brass CP shower rose complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC connection pipe of 1/2"x18" size with 2 Nos brass check nuts with washers, complete all as specified and directed by Engineer-in-Charge.
S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed
Supply and fixing in repair Brass CP Wall mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed
S&F in repair CP grating 125mm dia, complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm average thick (average) screed bed in cement mortar 1:4 using WPC on roof surfaces & finished even and smooth with using extra cement in any position upto G+5 storey bldg complete all as specified.
M&L for PCC 1:2:4 of 25mm thick (using 20mm aggregate) type B-1 as in levelling course finished even and fair without using extra cement upto G+5 storey bldg
M&L for APP based polymeric membrane plain finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints including taking down upto G+5 storey bldg and applying two coat of silver shild bituminous paint on App membrane comlete all as specified and directed by Engr-in-Charge.
Cleaning and removal of debries such as stones, waste materials etc from surrounding are of building incl cutting shrubs with growth trees no exc 30 cm girth and removing complete vegetation growth from walls including taking out roots from roof / brick work and making good the disturbed surface with plaster and PCC 1 :2:4 type B0 and disposing the rubbish from site (MOD land) for a block of eleven flats of six storey height complete and as specified
Schedule of Credit
M/S.M.S.Devi.Const.Co
ANSH VANSH CONSTRUCTION COMPANY
M/S CHANDER MUNI
Sanjay Associates
Kunal Construction Co.
M/S MSD & Associate
VED PRAKASH ARORA
SHREE RAM BUILD TECH
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .