Certain repairs to floor, wall, joinery, plumbing and misc B/R work in Md accn under AGE B/R-I, GE Gurdaspur.

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed

All as per Srl item No 3 above but in CM 1:6.

M&L for rendering celing plaster 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

M&L for preparing newly plastered surfaces on walls and applying two coats of distemper oil emulsion paint over a coat of primer incl 1mm thick wall putty complete all as specified and directed.

Taking down chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) (windows) complete all as specified and directed.

All as per Srl item No 10 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr.

Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed

Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm and refixing in the same opening after making repair/ adjustment each complete all as specified and directed

S&F including taking down steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmX25mm single rebated comprises glazed shutter including guard bar ERW sec 50mmX20mm and 1mm thick with two openable leaf consisting two nos sash bar of T-section 20mmX3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 including following fitting welded to frame shutter:- (i) Hold fast,150mm long of 12mmX3mm made to shape-04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per window (iii) MS Tower bolt 150mm long-02 Nos per window (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per window (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-1020/06 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontlly.

M&L for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 incuding cutting holes and taking down old steel ventilator complete all as specified. NOTE : - Sheet glass and painting shall be measured and paid separately.

S&F pressed steel frames 1.25mm thick for door size of frame 105 x 60mm single/ double rebate including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including two coats synthetic enamel paint to exposed surface complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 125 x 60mm single/double rebate including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges including two coats synthetic enamel paint to exposed surface complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F IInd class hard wood glazed and skeleton shutters 30mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S&F factory made solid PVC moulded door shutter,filled with wood free EPS of 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire including bids staples complete all as specified and directed.

M&L in repair prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination &other side balancing white lamination, fixed with screws to timber frame work fixed in repair complete all as specified and directed.

Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site complete all as specified and directed.

S&F sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including oil putty complete all as specified and directed.

S&F figured glass pin head type glazing with oil puty glass 3mm thick , fixed with oil puty in square n exe 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs 300mm long Mild steel sliding door bolts stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and directed.

S&F aluminium anodized barel tower bolt of extrud sec 150mm long complete all as specified and directed.

All as per Srl item No 28 above but 250mm long.

S&F aluminium alloyed handle cast type anodized of size 150mm long complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F but hinges med weight cold rolled mild steel 125mm size complete all as specified and directed.

S&F in repairs 200mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and directed. Note : Repair required on steel door frame, welding to be carried out or necessary alternative arrangements tobe done.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of new surfaces complete all as specified and directed.

M&L two coats of synthetic enamel painting over one coat of pink primer on new wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces complete all as specified and directed.

S&F in repairs vitreous China Squatting pan 'Orissa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110mm bore complete all as specified and directed. Make CERA/HINDWARE/PARRYWARE

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)Wash down water closet (Pedestal pattern), complete, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incld PVC (SWR) 'P’ trap of 110mm complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket complete all as specified and directed.

S&F in repair flush pipe of polythylene of low or high density or PVC, 32mm dia for low level cistern complete all as specified and directed.

S&F in repair vitreous china wash basin white,flat back size 550 x 400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete all as specified and directed. Make ;- CERA/HINDWARE/PARRYWARE

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F rotational moulded white colored , polytheylene, triple layered, water storage tanks 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete and including Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr all as specified and directed

Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for reuse or removal to store complete all as specified and directed.

All as per Srl item No 43 above but 20mm bore of pipe

All as per Srl item No 43 above but 25mm bore of pipe

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

All as per Srl item No 46 above but fixing only (old serviceable pipe re-used)

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

All as per Srl item No 48 above but fixing only (Old unsverviceable pipe re-used)

S&F GI tubing 25mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings complete all as specified and directed.

S&F in repairs chromium plated angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair Jet spraywith PVC connection 600mm long complete all as specified and directed.

S&F in repair pillar taps fancy type 15mm, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair for 15mm bore stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed

S&F in repair ball valves 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms.) complete all as specified and directed.

S&F in repair 15mm dia bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule chromium plated and fixed , fancy type complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 32mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc fixed to WHB complete all as specified and directed.

S&F in repair 40 mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. fixed to ktchen sink complete all as specified and directed.

S&F in repairs 100mm dia CP grating with or without hinge type or hole type complete all specified and directed.

M&L for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 250 ltr and n.exc 500 ltrs and refixing for same opening including writing letters with paint for date of cleaning complete all as specified and directed by Engineer-in-Charge.

Removing vegetation (small plants, grass and etc) and making good to match the existing surface, area not less than 01 Sqm and n. exc 1.5 sqm upto 12 meter hieght as side wall and top of roof complete all as specified and directed.

M & L for preparation of old ceiling surfaces applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated wall surfaces and applying one coat of white wash complete all as specified upto 12 meter height.

M&L for preparation of old plastered surfaces by complete removal existing treatment and applying two coats of OBD over a coat of primer complete all as specfied and directed upto 12 meter height.

M&L for preparation existing treatment removing surface of old decorated wall surfaces and applying two coat of cement based paint over a coat of primer complete all as specfied and directed upto 12 meter height.

M & L for preparation old painted wooden surface and applying one coat of synthetic enamel paint complete all as specified

M & L for preparation old painted Steel surface and applying one coat of synthetic enamel paint complete all as specified

Dismantling of floor, hearth or wall tiling incl cement morter bedding.

S&F non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed. Make:-Orient,Kajaria,Johnson.

S&F glazed ceramic tiles in vertical surface 300 x 200x 7 mm/ 350X 250X 7mm/ 450x350x7mm thick on and incl 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting/ dado complete all as specified and directed. Make :- Orient, Kajaria, Johnson.

S&F non - skid dark shade ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Make:-Orient,Kajaria,Johnson.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for marble work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as speicified and directed and approved by Engineer-in-Charge.

Dismantling of roof brick tiles fixed in cement mortar in single layer incl demolition and removal of mud phuska complete all as specified and directed.

M&L for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.

All as per Srl item No 77 above but except tiles.

Raking out joints in CM and M/L flush pointing to brick tiles in CM (1:3) laid on roof complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding complete all as specified and directed.

M&L 10mm thick cement plaster in CM (1:4) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound (plaster, roof and sunken portion).

S&F 3mm thick reinforced with polyster non wove fabric APP modified membrance of weight not less than 3.0 kg/sqm torch shield using gas burner includig 150mm side/ laps over bitumen primer @ 0.3 kg/sqm complete all as specified and directed. Note :- WPC shall be measured and paid separately.

M&L for bitumen primer @ 0.3 kg/ sqm complete all as specified and directed (roof and sunken portion).

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in rof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes or any type, jointed in cement mortar and taking out of trenches, if required.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S & F stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair PVC(SWR) 110mm bore bends any radius complete all as specified and directed.

S&F in repair PVC(SWR) 75mm bore bends any radius complete all as specified and directed.

S&F CP brass towel rail `D’ type 60 Cm long fixed to wall complete all as specified and directed.by Engr-in-Charge

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers (curtain road) etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness ( below or above ground level) complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C2 using 20mm stone aggregate in plinth protection including finishing evewn and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 using 20mm stone aggregate in as in floor including finishing even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work, in any position built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks straight curved on plan exc 6m mean radius built in cement mortar 1:4 brick m slightly rounded as wedged shaped as specified the part made of mild steel heavy duty in fixed all as specified and directed. size bricks complete all as specified and directed.

All as per Srl item No 98 above but except bricks

Demolition of cement concrete in ground floor and paving exc 15cm thickness but above ground floors.

M&L for plaster 15mm thick in CM 1:4 in sunken portion of slab with using water proofing compound.

M&L for PCC 1:7:12 type F2 using 40mm stone aggregate filling foundation and mass concrete in sunken floor complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm stone aggregate for manholes cover complete all as specified and directed.

S&F 3mm thick reinforced with polyster non wove fabric APP modified membrance of weight not less than 3.0 kg/sqm torch shield using gas burner includig 150mm side/ laps over a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm and bitumen primer @ 0.3 kg/ sqm complete all as specified and directed by Engineer-in-Charge. Note :- Bitmen primer shall be measured and paid separately.

S&F stainless steel sink, 1.00 thick for kitchen or laboratory, with plug, waste pipe , washers including cantilever cast iron brackets, connecting union etc overall size 495mm x 420mm with bowl soze 410mm x 330mm x 160mm with coupling and necessary fixing arrangment complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 1mm thick sheet for kitchen or laboratory with plugs, washers, wastes pipe , cast iron contilever brackets, connecting union verall size 915mm x 460mm bowl size 410x330x60mm with coupling and necessary fixing arrangment complete all as specified as directed.

S&F in repairs stainless steel plate reck of size 900 x 600 x 300mm width made out of 1mm thick sheet including fittings arrangement complete all as specified and directed of make approved by GE.

M&L for 100 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for 50mm thick ceemnt concrete type D-2, 1:4:8 using 40mm stone aggregate as in sub base or floor complete all as specified and directed.

S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set , jointed and pointed in neat cement slurry in floors, including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

S&F for 60mm thick PCC (M-35) factory made coloured interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand, complete all as specified and dirrected by Engr-in-Charge. Note :- sand will be paid under relavent item.

Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for repairing of RCC projections, chajjas, roofs, facia etc by necessary preparatons i.e scraping , cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of demaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) using 12.5 mm graded crushed stone aggregate and reinforced with 10mm TMT bars with or without facia and finished with cement sand mortar (1:3) using coarse and in patches area n. exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed. Note :- Cost of form work and welded mesh, bldg ht upto 12 mtr shall be deemed to be included in unit rate quoted by the Contractor.

S&F in repair health faucet chromium plated with pipe, hanging arrangement and complete all as specified and directed.

S&F in repair 75/100/110 mm PVC (SRW) floor trap, plain with grating including jointing with solvent cement and PCC bedding surrounding complete all as specified and directed.

S&F mil steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F in repaair 110mm PVC (SRW) branch piece, single (Single Y) equal or unequal and complete all as specified and directed.

S&F in repair 110mm PVC (SRW) junction single, (Single T) equal or unequal and complete all as specified and diected.

Harbhajan electric co

M/s. STS Sales Corporation

JOGRAJ CONSTRUCTION COMPANY

D.RAJ And CO.