RFQ 11004 Renovation of Central Instrumentation Building for Rescue Room with refresher Training Facility (RRRT)

P&F Precoated G.I profile /Trapezoidal profile sheets 0.50 mm (0.05%)TCT zinc coating 120 grams per sqm, in 240mpa steel grade, 5-7 microns epoxy primer & polyster top coating 15-18 micron, self drilling/ tapping screws (5.5-8x55mm)

P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade 5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Ridges plain(500-600 mm)

P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade 5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Flashings/Aprons (Upto 600 mm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consist

Providing and fixing aluminium work for doors, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved mark confirming to IS : 733 and IS : 1285

Providing and fixing glazing in aluminium door,windo,ventilator shutters and partitions etc with PVC/ Neoprene gasket etc complete as per the architectural drawings

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disp

DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY

REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UPTO 15 DEGREE, LANDINGS , BALCONIES, SHELVES, CHAJJAS, LINTELS, BANDS, PLAIN WINDOW SILLS, STAIRCASES AND SPIRAL STAIR CASES UPTO TO FLOOR FIVE LEVEL EXCLUDING

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars

DISMANTLING DOORS WINDOWS AND CLERSTORY WINDOWS (STEEL OR WOOD) SHRTTER INCLUDING CHOWKHATS, ARCHITRAVE, HOLDFASTS ETC. COMPLETE AND DEPOSITING THE SAME IN CENTRAL/SITE STORES. OF AREA 3 SQ.M AND BELOW

PROVIDING AND FIXING COMMERCIAL PLY WOOD 18 MM THICK AS PER DIRECTIONS OF ENGINEER IN-CHARGE

PROVIDING AND FIXING Sunmica, 1mm thickness of approved quality AS PER DIRECTIONS OF ENGINEER IN-CHARGE

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Sal wood

DISMANTLING ROOFING INCLUDING RIDGES, HIP VALLEYS AND GUTTERS ETC. AND DEPOSITING THE SERVICABLE MATERIALS IN CENTRAL/SITE STORES AND INCLUDING DISPOSAL OF UNSERVICABLE MATERIALS WITHIN 50 M LEAD AS PER DIRECTION OF ENGINEER IN CHARGE. ASB

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats)

White washing with lime to give an even shade:New work (three or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform.

PROVIDING AND LAYING IN POSITION CEMENT CONCRETE 1:4:8 (1 CEMENT: 4 COARSE SAND: 8 GRADED STONE AGGREGATE 40 M.M. NOMINAL SIZE) EXCLUDING SHUTTERING

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite for kitchen platforms, laid over 20 mm thick base cement mortar 1:4 finish

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked for doors including cost of cutting floors as required embeding in floors and cover plate with brass pivot

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EIC

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. b

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device,conforming to IS : 7231.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe32 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia. nominal bore

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:3:6 or richer mix

P/F stainless steel Kitchen Sink with C.I. Brackets and S S Plug 40 MM , including Painting of fittings and brackets, cutting and making good the walls whenever required. ( A) Kitchen Sink with Drain Board :510X1040 MM bowl depth 250 MM

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore

M/S NASIRUDEEN CONTRACTOR

CHHABRA ASSOCIATES

CIS GLOBAL INFRATECH PRIVATE LIMITED