Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | single₹5.1 LAccepted-Finance | ₹5.1 L | single | Accepted-Finance Single Tender found in order |
| Sl No | Description | Qty | Unit | M/s SAGAR ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
a)G.S. Sheet | 94 | One Sqm | 200 ₹18,800 Lowest |
| 2.00 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 220 | One kg | 30 ₹6,600 Lowest |
| 3.00 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
a)40 mm thick with 20 mm nominal size stone aggregate | 28 | One Sqm | 1,000 ₹28,000 Lowest |
| 4.00 | 15 mm cement plaster on rough side of single or half brick wall of mix :
a)1:4 (1 cement: 4 coarse sand) | 20 | One Sqm | 850 ₹17,000 Lowest |
| 5.00 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 46 | One Sqm | 100 ₹4,600 Lowest |
| 6.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 136 | One Sqm | 1,200 ₹1,63,200 Lowest |
| 7.00 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
a)Two or more coats on new work. | 20 | One Sqm | 250 ₹5,000 Lowest |
| 8.00 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work. | 50 | One Sqm | 250 ₹12,500 Lowest |
| 9.00 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 300 | One Kg | 240 ₹72,000 Lowest |
| 10.00 | Extra for using GI sections, ie angles, plates, flats etc instead of MS sections ie, angles , plates and flats for executing work vide item No 9 | 300 | One Kg | 50 ₹15,000 Lowest |
Tender Value
₹4.9 L
EMD Value
₹9,750
Closing Date
20 Jul 2026, 6:00 pmClosed
EE Civil, BSNL
Telephone Bhawan-2nd Floor, Sri Vijayapuram
Repairing of BTS shelter with GI section and sheet at Collinpur, Manpur, Miletilak and Chinmay Mission BTS AN Islands.
2026_BSNL_283767_1
05/NIT/CD-PB/AN/2026-27
Open Tender
Civil Works
Item Rate
60 days
Sri vijayapuram
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL
₹9,750
22 Jul 2026
13 Jul 2026
22 Jul 2026
13 Jul 2026
20 Jul 2026
13 Jul 2026
13 Jul 2026 - 20 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
a)G.S. Sheet | 94 | One Sqm | - | - |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | 220 | One kg | - | - |
| 3 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
a)40 mm thick with 20 mm nominal size stone aggregate | 28 | One Sqm | - | - |
| 4 | 15 mm cement plaster on rough side of single or half brick wall of mix :
a)1:4 (1 cement: 4 coarse sand) | 20 | One Sqm | - | - |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 46 | One Sqm | - | - |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 136 | One Sqm | - | - |
| 7 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:
a)Two or more coats on new work. | 20 | One Sqm | - | - |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
a) Two or more coats on new work. | 50 | One Sqm | - | - |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 300 | One Kg | - | - |
| 10 | Extra for using GI sections, ie angles, plates, flats etc instead of MS sections ie, angles , plates and flats for executing work vide item No 9 | 300 | One Kg | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_331056.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.11 MB
BOQ_331056.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .