SPECIAL REPAIRS TO SEWAGE LINE WITH ALLIED WORKS AT ATS BELGAVI

Amount

Demolition of cement concrete of any description and in any position all as specified and directed.

Demolition of Brickwork or stone/boulder masonry,built in cement mortar or cement lime mortar all as specified and directed.

Demolition of Cement concrete reinforced of any description and in any position not otherwise specifically provided for cover slabs and similar work all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out hard dense soil all as specified and directed.

Excavating in trenches n.exc 1.50 m wide & n.exc 1.50 m depth and for man holes etc n.exc 10 sqm on plan for foundation and getting out in hard/dense soil all as specified and directed.

Excavating in trenches n.exc 1.50 m wide and depth exc 1.5 m and not exc 3 m. .and for man holes etc n.exc 10 sqm on plan for foundation and getting out in Hard /dense soil all as specified and directed.

Excavating in trenches n.exc 1.50 m wide & exc 3 m but n.exc 4.5m for foundation and getting out in hard/dense soil all as specified and directed.

Returning filling in including spreading leveling and well ramming in layers n.exc 25 cm thick all as specified and directed.

Removing excavated material to a distance exc 50m but n.exc 100 m and depositing where directed at a level n.exc 1.50m from starting point all as specified and directed.

Removing excavated material to a distance not exc 50m and depositing where directed at a level n.exc 1.50m from starting point all as specified and directed.

Material and labour for hardcore of gauge n exc. 63mm, deposited, spread andlevelled in layers n exc. 15cm thick, watered andrammed to a true surface

Material and labour for PCC 1:4:8, type D-2 (using 40mm graded stone aggrigate) as in foundation, (For Man holes etc) all as specified and directed.

Material and labour for Cement concrete 1:2:4, type B-1 (20mm grade crushed stone aggrigate) as in benching and forming channel inside manholes for section of pipe 100mm, 150mm or 200mm including finished even and smooth using extra cement all as specified and as directed.

Material and labour for PCC 1:2:4, type B-1 (using 20mm graded stone aggrigate) as in foundation / mass filling,road cutting portion etc. all as specified and directed.

Material and labour for Precast RCC 1:2:4 type B-1(using 20 mm graded stone aggrigate) as in cover slab set and jointed in CM 1:4 including necessary form work all as specified and as directed. ( Steel rienforcement shall be measured and paid seperately).

Material and labour for Precast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:4., complete type C1, 1:3:6 (using 20 mm graded stone aggregate ) all as specified and directed.

Material and labour for Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggrigate) as in coping including necessary form work all as specified and directed.

Material and labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 all as specified and directed.

Supply and fix TMT steel bar 10 mm dia and over cut to length, bent to shape required including cranking bending, hooking for ends and binding with mild steel wire annealed not less than 0.9mm dia all as specified and as directed.

Supply and fix 10 mm dia and over mild steel round bars Fe 290 (Gde -E-165) for handles / rungs and over cut to length, bent to shape required including cranking bending, hooking for ends and binding with mild steel wire annealed not less than 0.9mm dia all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring with 75mm thickness all as specified and directed.

Material and labour for 100 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in flooring even and smooth without using extra cement including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

Material and labour for forming of constrution joint 30 mm deep x 10 mm wide filled with sealing compound grade 'B'.

Material and labour for Cement concrete type C2, 1:3:6 (40mm graded aggregate) 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified.

Material and labour for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement all as specified and directed.

Taking down cement plaster any description, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) 150 mm internal dia set in CM complete all as specified. Note:- Excavation work shall be measured and paid seperately.

Demolition and breaking up drain pipes (SGSW, AC or RCC) 200/300 mm internal dia set in CM complete all as specified. Note:- Excavation work shall be measured and paid seperately.

Material and labour for Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggrigate) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe all as specified and as directed.

Material and labour for Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggrigate) as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe all as specified and as directed.

Supply and fix Salt glazed stone ware pipe laid in trenches and jointed with cement nominal dia of pipe.150 mm all as specified and directed.

Supply and fix Salt glazed stone ware pipe laid in trenches and jointed with cement nominal dia of pipe. 200 mm all as specified and directed.

Supply and fix reinforced concrete pipes dia 200 mm class NP-2 laid and jointed complete with collers all as specified and as directed.

Supply and laying PVC (SWR) Pipe 200 mm bore, type B, in any length with rubber ring joint laid in trenches or in floor conforming to IS 13592; including taking down the existing pipes all as specified and as directed. ( Note:- Excavation work shall be measured and paid seperately.)

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete type B1, 1:2:4, smooth finished, and reforming benching as required for 150 mm internal dia all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete type B1, 1:2:4, smooth finished, and reforming benching as required for 200 mm internal dia all as specified and directed.

Supply and laying PVC (SWR) Pipe 110 mm bore, type B, in any length with rubber ring joint laid in trenches or in floor conforming to IS 13592; including taking down all as specified and directed. Note:- Excavation work shall be measured and paid seperately.

Supply and laying PVC (SWR) Pipe 75 mm bore, type B, in any length with rubber ring joint laid in trenches or in floor conforming to IS 13592; including taking down all as specified and directed. Note:- Excavation work shall be measured and paid seperately.

Supply and laying 110 mm bore PVC (SWR) bends with access door any radius all as specified and directed.

Supply and laying 75 mm bore PVC (SWR) bends with access door any radius all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) junction single, (Single 'T'), equal or un equal all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) junction single, (Single 'T'), equal or un equal all as specified and directed.

Cleaning of sewage line of any dia and including man holes (between manhole to manhole and man hole to septic tank) by rodding with bamboo and gunny bags and removing sludge/ debris/ night soil from premices etc and cleaning with fresh water all as directed.

Removal of concrete and plaster debris to a distance upto 2 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Supply and fix Anodised aluminium powder coated frame for doors, windows and for partition walls with one or more rebates including joining cleat for fixing etc complete all as specified.

Supply and fix Anodised aluminium powder coated sliding door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing cleaps, rubber neoprane packing, aluminium snap beading, screws, handles 2 Nos, hinges in each door including guide rails etc etc complete all as specified.

Supply and fix 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations fixed, etc all as specified and as directed.

Supply and fix 100 mm Mortice lock, vertical type, Brass locks 4 levers, of make: Godgrej or equivalent all as specified and as directed.

Supply and fix 200 mm Aluminum anodised barrel tower bolt of extruded section all as specified and as directed.

Supply and fix plywood 18 MM thick grade BWP,type BB fixed withscrews to timber framework of cupboards/shelves all as specified and directed

Supply and fix Decorative laminate type1 0.90 mm thick of surface finish, colour and pattern as approved, fixedwith approved adhesive asper manufacturer'sinstructions

Material and labour for 2nd class hardwood exc 13 Sq cm not exc 25 sq cm plain fillets square, bull nosed, splayed, chamfered or rounded on one edge or face

Supply and fix continuous (piono) hinges with width of flaps30mm (when open), brass, bright finish or electrogalvanised all as specified

Supply and fix Rolled mild steel in Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe-290 (Gde E-165) including necessary welding work, drilling holes etc and making good surface for disturbed portion

Supply and fix Gate and shutter, hooks and eyes 200 mm of aluminium plate type II all as specified and directed

Supply and fix in Casement stays mild steel of size 300 mm with hinged joints and two plates with studs with suitable at for wooden members as plywood ,fillets etc complete all as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm x 4 core all as specified and directed.

Material and labour for sand cushioning with coarse sand in trenches for protection of under ground electric cable provided with a layer of 8cm deep before laying the cable and 15 cm deep after laying and streaching the cable incl hand punning and punned down gently to 18 cm complete all as specified and directed. Note:- for the purpose of payment, punned thickness only will be measured

Supply and laying well burnt sub class B bricks old size bricks, laid flat dry, in trenches with width of the bricks laid to the axis of cable for cable protection complete all as specified and as directed.

Material and labour for GI pipes light grade galvanised with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors of 40 MM dia. all as specified and as directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping of suitable size not less than 25mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for One light point controlled by one switchall as directed.

Material and Labour for point wiring with PVC insulated and unsheathed multi standard 2.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping of suitable size not less than 25mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC insulated and unsheathed multi standard 2.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for one 3 pin socket outlet 15 Amps independent all as directed.

Supply and fix switch piano, flush type single pole, one way 5 Amps all as specified and directed.

Supply and fix Ceiling rose, surface type PVC, 50x25mm, three terminals complete all as specified and as directed.

Supply & fixing in repairs CFL lamp holder PVC Batten / pendent / bracket type all as specified and directed.

Supply & fixing 11 Watt adjustable mirror light all as specified and directed.

Supply & fix in switch socket combination 2 in 1,3 pin 16 Amp flush type 240 volts complete all as specified and directed.

Supply & fix LED Bulb 0 W complete all as specified and directed.

Supply & fix sheet metal enclosure factory made double door for SPN DB 4 Way complete all as specified and as directed.

Supply & fix sheet metal enclosure factory made double door for SPN DB 8 Way complete all as specified and as directed.

Supply & fix MCB TPN 6-32 Amps 240 volts, 50 Hz AC supply complete all as specified and directed

Supply & fix MCB SPN 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified and as directed.

Supply & fix MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified and as directed.

Supply & fix Blank plate for MCB DB's all as specified and as directed.

Material and labour for sub main wiring four single core PVC insulated and unsheathed cables with copper conductor 1100V grade, 6 sq mm drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed up walls, roofs, or floors including two run of 6 sqmm PVC insulated cable and connecting up complete. Note:- 6 run of cable along with earth wire and PVC conduit / casing & capping will be measured as one unit length.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12 mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in Electrical Plate No 3 of SSR Part-I and testing on completion.

M/S MAHADEV M PATIL

M/S ADITYA CONSTRUCTIONS

C V ATIWADAKAR

DHANSHRI ENTERPRISES

M/s. N D KALING

PURVIK CONSTRUCTIONS