REPAIR MAINT OF INTERNAL ELECTRIFICATION IN DOMOSTIC KLP PH LINE AREA UNDER AGE E M WEST OF GE M AF JALAHALLI BANGALORE

Amount

Taking down carefully aluminium Point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, etc. all as directed.including taking down fittings such as switches, ceiling roses, regulators, sockets,lamp holders, ceiling fittings, bulk head fittings, any type tube light fittings/building security light fitting etc. complete all as specified.

Taking down carefully copper/aluminium submain wiring any type and size / socket or power unserviceable materials complete all as specified.

Taking down ceiling fan/exhaust fan, sealing cable end, dismantling blades and removing fan and blades and Refixing to Existing place after serviceing and painting complete all as specified and as directed.

Material and labour for painting of ceiling fan/ Exhaust fan complete in suitable with synthetic enamel paint by spraying incl filling cavites with filler,one coat after cleaning all dust etc & re-fixing at the same location complete all as specified.

Material and labourfor Point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in existing concealed PVC rigid non metalic conduit, including replacement of mild steel modular sunken box including inner/outer sheet and fixed concealed covered etc including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete for one light Point controlled by one 5/6 amps one way switch. (Note:Modular switch /socket and fan regulator deem to be measured and paid seperatly)

All as per item No 5 but here -in- before but for One fan Point controlled by one way switch

All as per item No 5 but here -in- before but for One 2/3 pin socket outlet 5Amps on independent board

All as per item No 5 but here -in- before but for One 3 pin socket outlet 5 Amps on the same board with other switches

All as per item No 5 but here -in- before but for One bell Point controlled by one bell push on independent board.

All as per item No 5 above but one switch socket combination 15 Amps independent with cable 2.5 sq mm size

All as per item No. 5 but here-in-before but for Point wiring for equipment with cable 4 Sq mm size complete all as specified.

Material and labour for Point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistrand copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CM/L No. drawn in conduit/casing caping PVC rigid non metalic conduit, including mild steel modular sunken box including inner/outer sheet and fixed concealed covered etc including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete for one light/fan Point controlled by one 5/6 amps one way switch. (Note:Modular switch /socket and fan regulator deem to be measured and paid seperatly)

All as per Srl item No 12 here-in-before but for socket Point 5 Amps outlet independent board complete all as specified.

All as per Srl item No 12 here-in-before but for socket Point 5 Amps outlet same board complete all as specified.

All as per Srl item No 12 here-in-before but for one light Point controlled by two way switches with cables using 1.5 Sqmm PVC insulated unsheathed copper conductor with all fittings and all accessories complete all as specified.

All as per Srl item No 12 here-in-before but for 15 Amps socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conductor multi stranded on independent board including provn of 2.5 Sqmm PVC insulated unsheathed copper conductor multi stranded continus as earth wire complete all as specified.

All as per Srl item No 12 here-in-before but for Call Bell Point independent board with cables using 1.5 Sqmm PVC insulated unsheathed copper conductor complete all as specified.

All as per SrI item No.12 above but for any type of power equipment with cable 4 Sq mm size and 4 Sqmm for earth condinuity.

All as per item No 12 but here -in- before but for surface Point wiring light drawn in suitable sunken box and frame cover plate for mounting of switches as required at site complete all as specified. NOTE: switches/ sockets, fan Regulator shall be measured and paid separately under respective item.

All as per SrI item No.19 here-n-before but for One ceiling fan/exhaust fan Point controlled by one, one way switch

All as per SrI item No.19 here-n-before but for One 2/3 pin switch socket outlet Point controlled by 5 Amps switch on independent board

All as per SrI item No.19 here-n-before but for One2/ 3 pin socket outlet Point controlled by 5 Amps switch on the same board with other switches

All as per item No 19 above but one switch socket combination 15 Amps independent with cable 2.5 sq mm size

All as per Srl item No 19 here-in-before but for one light controlled by two way switches with cables using 1.5 Sqmm PVC insulated unsheathed copper conductor with all fittings and all accessories complete all as specified.

All as per item No.19 above but for any type of power equipment with cable 4 Sq mm size and 4Sqmm for earth condinuity.

Supply and fixing switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fixing bell push 5A one way complete all as specified.

Supply and fixing Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5A complete all as specified.

Supply and fixing switch socket combination multi purpose 5 Amp /16 Amps, 5 in1, flush type complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic stepup type 100 Watt surface type complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed.

Supply and fixing Bell, AC, 230 volts, single pole AC 230 volts single pole complete all as specified.

Supply and fixing modular type switch 6 Amps, one way complete all as specified. Make- Crabtree/Havells/ Legrand.

Supply and fixing modular type switch 16 Amps, one way complete all as specified. Make- Crabtree/Havells/ Legrand.

Supply and fixing Modular Type two way switch, 6 Amps, complete all as specifiedand directed. Make- Crabtree/Havells/ Legrand.

Supply and fixing Modular Bell push 6 Amps, modular type complete all as specified. Make- Crabtree/Havells/ Legrand.

Supply and fixing Modular Type Socket outlet, 6 Amps, complete all as specified. Make- Crabtree/Havells/ Legrand.

Supply and fixing Modular Type Socket outlet, 6/16 Amps, complete all as specified. Make- Crabtree/Havells/ Legrand.

Supply and fixing Modular Fan step regulator, 100/120W - 2 module Electronic step type complete all as specifed and directed. Make- Crabtree/Havells/ Legrand.

Supply and fixing lamp holder, PVC/Polycarbonate insulated body with back plate batten / angle / pendent type incl LED Lamp 9 watts complete all as specified and directed.

Supply and fixing of Modular blanking plate etc complete all as specified and directed.

Supply and fixing LED light fitting,4 feet, 1 x 20 watt 230 Volt, slim body with reflector,drivers,LEDs Astra is a surface & wall mounted LED batten with extruded aluminium housing and robust construction complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down.Make : PHILIPS or equvalent to Bajaj/CG

Supply and fixing LED Tube light fitting 2 feet 1 x 10 watt 230 Volt, slim body with reflector,drivers,LEDs and , complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down. Make PHILIPS equvalent Bajaj/CG

Material and labour in repairs of sub main wiring with one single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 2.5 sqmm drawn through existing conduit non-metallic PVC rigid conduit/casing caping including connecting up complete all as specified and directed.

Material and labour in replacement of sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 2.5 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping with 2.5sqmm copper conductor cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed.

All as per item No 46 above here-in-before but 4sqmm 2 single core of main cable and 4 sqmm one run of earth cable

Supply and Fixing Compect LED bulkhead Fitting with 9Watt LED Bulb suitable for fixing on suface on Wall complete all as specified and directed.

Supply only Choke electronic slim type suitable for fluorescent light fittings 14/20/28Watts.

Material and labourfor replacing of LED driver 18W/20/22W of fitting suitable size complete all as specified.

Supply and fix in repairs of the unserviceable Switch socket combination flush type 2 in 1, 3 pin, 5 Amps 230V and connecting circuit complete all as specified.

All as per item No 51 above but Switch socket combination flush type 3/5 pin, 15 Amps 230V.

All as per item No 51 above but ceiling fan regulator electronic type 100 to 180 Watt & capacitor surface type complete all as specified.

Supply and fix in repairs and including copper flexible wire 3 core 1.00 sqmm copper cable connecting up the light fittings all as directed.

Taking down Ceiling fan, sealing cable end,dismantling blades and removing fan for repair/servicing/rewinding and refixing after at existing place complete all as specified and as directed.(Note : Repairing/Re-winding of ceiling fan qty paid seperataly in item no 57 and 59.)

Taking down Exhaust fan any type, sealing cable end,dismantling blades and removing fan for repair/servicing/rewinding and refixing after at existing place complete all as specified and as directed.(Note : Repairing/Re-winding of Exhaust fan qty paid seperatalyin Item no- 58.)

Taking down old burnt out copper winding wire from ceiling fan of 1200/ 1400 mm sweep and re-winding by using same gauge of copper wire insulating and varnishing, heating, cleaning, servicing, greasing, and testing for smooth functioning complete all as directed

Taking down old burnt out copper winding wire from exhaust fan of any sweep and re-winding by using the same gauge of copper wire super enameled including heating and varnishing, cleaning, servicing, greasing and testing for smooth functioning complere all as directed.

Supply and fix in repairs to ceiling fan of 1200mm/1400mm sweep by replacing unserviceable ball bearing No. 6201/6202/6203 including taking down and necessary greasing to the bearings and fixing the same loaction complete all as specified and directed.

Supply and fix Electronic LED FTL rod 4 Feet capacity 20W Make : CG/Bajaj/Havells

Supply and fix Electronic LED FTL rod 2 Feet capacity 10W Make : CG/Bajaj/Havells

Taking down old unserviceable MCCBs any capacity MCCB including making good the disturbed area complete as directed

Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed area complete as directed

Supply and fixing Load line MCB DB TPN 8 Way factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 415 volts, neutral link, earth bar and Din rail double door complete all as specified.

Supply and fixing MCB distribution board single pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail double door complete all as specified.

Supply and fixing MCCB 125 Amps 16 KA, four pole 415 volts, 50 HZ complete all as specified and as directed.

Supply and fixing MCB SPN 6-32 Amps, 10 KA,240V, 50Hz, 'C' Series complete all as specified and as directed.

Supply and fixing MCB SP 6 to 32 Amps SP 10 KA,50HZ, 240V, 'C' Series complete all as specified and as directed.

M/S SRI BALAJI ENTERPRISES

RAMESH BABU CO

Shanthi Construction

B5BUILDING SOLUTIONS