Conversion of Verandah into Glass Room and Other Allied Works in DMQ-6 at M.A Road Srinagar.

Amount

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material out side Muncipal limits.

Dismantling of railling 50mm dia. Pipe with grill work including stacking as dorected within 50m lead.

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead 50M from edge of cutting .All kinds of soil.

Supplying and laying of dry stone soling hand packed tightly including ramming, watering and carriages complete.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work up to all levels. 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels. 1:3:6 (1Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal Size) Crushed

15mm thick cement plaster on rough side of single or half brick / concrete wall of mix 1:6 (1cement: 6 coarse sand) including curing complete.

Providing and fixing wood work in frame work / joists of false ceiling, partitions, joists etc. sawn and put up in position.First. Class K.D/Silver wood.

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete

Providing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paints on overlapping of sheets complete (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses 0.63 mm thick with zinc coating not less than 275 gm./Sqm

Providing ridges or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.63 mm thick with Zinc coating not less than 275 gm./Sqm

Providing and fixing of planed eaves boarding300mm x 32mm size of 1st Class Budloo wood.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade at all places.

Providing and fixing 35 mm thick half paneled and half glazed door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling and 3.5 mm thick float glass as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size)

Providing and fixing 35 mm thick glazed shutters for windows and clearstory windows using 8.75kg/Sqm. (3.5mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws. First. Class K.D/Silver wood.

Providing and fixing of 1st class KD wood Jaller (Ready made Net type) of specified size for windows and fixed portions.

Providing and fixing of glass pans with wooden fillets of required size wherever necessary.

Float glass panes of thickness 3.5 mm (weight not less than 8.75kg/sqm)

Float glass panes of thickness 5 mm (weight not less than 12.5kg/sqm)

Centering and shuttering including strutting propping etc. removal of form work in Foundation footings basis of columns etc. for mass concrete.

Providing and fixing of imported wooden panelling lining on walls tongued and grooved planks excluding cost of ground work and cover mouldings but including cost of nails screws including cost of two coats of touch wood etc. complete (12mm thick)

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade on at all places new work (two or more coats) including applying a coats of approved primer.

Providing and fixing of Aluminium Hardware fittings of approved make and quality.

Tower Bolt 100mm long.

Tower Bolt 150mm long.

Handle 150mm long.

Handle 100mm long.

Door closer spring type

Door Link Lock

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.(0.63mm thick)

Providing and fixing of ornamental cornice of 50mm face.1st class Budloo wood/ Silver wood.

Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / channels etc.

Providing and fixing pre- color coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Brick work with FPS bricks (Non-Modular)of class designation 75 in super structure above plinth level up to floor V level. In cement mortar 1cement: 6 fine sand mortar.

M/s ADIL AMIN SHEIKH

M/S MOHAMMAD ASLAM LILEE

M/s MOHAMMAD ASLAM MIR