PROVN OF CHAIN LINK FENCING FOR INTEGRATED SPORT COMPLEX AND CHETAK LINE AT UDAIPUR MIL STN UNDER AGE (I) UDAIPUR

Amount

Excavating in post holes (or similar holes) each n.exc0.5cum, getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed by Engr-in-charge.

Material & Labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in boundary pillars and posts, incl necessary formwork complete all as specified and directed by Engr-in-charge.

Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil. complete all as specified and directed by Engr-in-charge.

Material & Labour for cement concrete PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.

Material & Labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick on fair faces of concrete block masonry/brick masonry in cement concrete 1:4 cement mortar and finished fair and even complete all as specified and directed by Engr-in-charge.

Material and labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed by Engr-in-charge.

Supply and fixing MS angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in posts to fencing etc fixed in position conforming to Fe-410 (Gde E-250) (quality-A), complete all as specified and directed by Engr-in-charge.

Supply and fixing mild steel work as in flats to secure posts and struts in fencing/chain link fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, or welding etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-charge.

Supply only chain link fencing of mild steel galvanised of any size or type complete all as specified and directed by Engr-in-charge. Note:- Per unit weight of chain link fencing shall be verified by BOO detailed by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-charge.

Material & Labour mild steel round bar 10 mm dia and over conforming to Fe-410 (Gde E-250), cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia as in reinforcement to columns and line bars to hold/support the chain link fencing secured hodizontally, complete all as specified and directed by Engr-in-charge.

Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long and dia of bolt 11 to 15mm complete all as specified and directed by Engr-in-charge.

Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer, n exc 10cm width or girth when unconnected with other painting or when painted in a different tint, complete all as specified and directed by Engr-in-charge.

Material and Labour for applying two coat of white wash on wall surfaces incl preparation of newly plastered wall surfaces complete all as specified and directed by Engr-in-charge.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil. complete all as specified and directed by Engr-in-charge.

Removing excavated material (soils) not exc. 50 m and depositing, where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete Type B-1 (1:2:4) 20mm graded aggregate as in column footings & bases for columns, Plinth beam etc complete all as specified and directed by Engr-in-charge.

M&L for reinforced cement concrete Type B-1 (1:2:4) 20mm graded aggregate as in columns, pillars, piers, posts and struts. complete all as specified and directed by Engr-in-charge.

Use and waste of formwork to sides of concrete foundations, footings, bases of colmns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to battr finished rough and flat surface complete all as specified and directed by Engr-in-charge.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engr-in-charge.

Material and Labour for Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, pillars, window cills, cooking platforms including half round moulding as reqd, making hole for gas pipe etc. and like in cement mortar (1:4) incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick CM 1:6 screed bed. complete all as specified and directed by Engr-in-charge.

Supply and fixing steel work in tubular pipes (hollow) square or rectangular including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A in framed work as in doors or gates of pipes or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to fe-410-W (Gde-E-250) quality-A complete all as specified and directed by Engr-in-charge.

Material and Labour for two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed by Engr-in-charge.

M/s Ajay kumar Garge (BID ID -3497760)