REPAIRS TO CERTAIN ROADS AND RESURFACING TO BITUMINOUS ROADS IN AOR AGE B/R I UNDER GE (N) AHMEDNAGAR

Amount

M&L Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50 mm n exc 100mm deep complete all as specifide and directed.

M&L for 75mm thick ( compacted thick) WBM with crushed stone aggregates (granite or trap or basalt) of grading 02 (63mm to 40mm size) spread rolled with 08 to 10 tonne power roller and consolidated to a required camber and gradient all as specified and directed.

All as per Item No 2 above but except road metal. (Road metal obtained from Item No 1 shall be reused).

Preparing unsurfaced water bound macadam surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at the rate of 5.00 Kg /XSqm using paving bitumen VG-10 applied with mechanical bouser.

M&L Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm n'exc 50 mm deep complete all as specifide and directed.

Preparing existing black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bituminous primer at the rate of 2.5 Kg /XSqm using paving bitumen applied with mechanical bouser.

M&L premixed bituminous macadam with binder content 4% by weight of total mix of paving bitumen VG-30 compacted thickness 75mm or less ,laid and rolled to required camber and gradient using power roller etc all as specified. NOTE:- Premixed macadam shall be brought from hot mix plant and spread using mechanical paver. SDAC shall be laid within 48 hours of rolling of BM.

M&L bituminous premix asphaltic semi dense concrete 30 mm thick consolidated thickness with 5.% binder content by weight of total mix using paving bitumen VG-30 penetration spread using mechanical paver and rolled & compacted to required gradient and camber using power roller 8 to 12 tonne capacity. NOTE:- Pre mixed bituminous asphaltic semi dense concrete shall be brought from hot mix plant and spread using mechanical paver

M&L Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.0 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions .

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M/S Anil Enterprises (BID ID -3155062)

M/s S. R. Constructions (BID ID -3153205)

M/S K.K.BINNAR (BID ID -3153103)