8923 REPAIR AND REPLACEMENT OF CEILING FAN EXHAUST FAN AND GEYSER AT KALINA MILITARY CAMP UNDER GE NORTH MUMBAI

Amount

Taking down ceiling fan / exhaust fan / wall mounted fan of any make/type/size/sweep, at site from any height of the building for any defect, servicing complete, repairs / overhauling including replacement of worn out parts / rewinding as required, spare parts & re-fixing in same position including successful testing on full load with blade complete all as specified and as directed by Engineer-in-Charge. Note: (i) Capacitor, ball bearing, condenser, bushes, split pin, 'U' clamp with rubber reel, shaft and PVC canopy will be measured and paid separately as "Supply only". (ii) Serviceable spares shall be reused. (iii) Rewinding will be measured and paid separately.

Material and labour for rewinding of burnt ceiling fan 1200 mm sweep, 230 volts, AC, (after opening and taking out burnt winding) with suitable size of super enamelled copper winding wire so as to meet original specification of fan including insulation material/varnishing etc., and reassembling the same after testing on full load with blade complete all as specified and directed. Make: Deen dayal, finolex, Atlas.

All as per item No. 2 described here-in-before but 1400mm sweep, 230 volt, AC complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rewinding of burnt exhaust fan 300/230 mm sweep, 230 volts, AC, (after opening and taking out burnt winding) with suitable size of super enamelled copper winding wire so as to meet original specification of fan including insulation material/varnishing etc., and reassembling the same after testing on full load with blade complete all as specified and directed. Make: Deen dayal, finolex, Atlas.

All as per item No. 4 described here-in-before but 380mm sweep, 230 volt, AC complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 4 described here-in-before but 450mm sweep, 230 volt, AC complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 4 described here-in-before but 600mm sweep, 230 volt, AC complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machining the shaft of ceiling fan to suit the gun metal bushes complete all as specified and as directed by Engr-in-Charge.

Material and labour for rewinding of burnt wall mounted fan 450/600mm sweep, 230 volts, AC, single phase, removing old unserviceable wire, cleaning of slots properly and rewinding with super enamelled copper winding wire of existing gauge with insulating material, heating, varnishing, greasing, re-assembling the same after testing on full load with blade and replacement of worn out minor parts complete all as specified and as directed by Engineer-in-Charge.

Supply only ball bearing suitable for ceiling fan as per sample ( 6201/6202) complete all as specified and as directed by Engineer-in-Charge. Make: SEICO, NBC, SKF, TATA

Supply only ball bearing suitable for exhaust fan as per sample ( 6203/6204) complete all as specified and as directed by Engineer-in-Charge. Make: SEICO, NBC, SKF, TATA

Supply only ball bearing suitable for wall mounted/cabin fan as per sample complete all as specified and as directed by Engineer-in-Charge. Make: SEICO, NBC, SKF, TATA

Supply only Gun metal bushes for fans of different sizes complete all as specified and as directed by Engineer-in-Charge.

Supply only condenser 2.5 MFD, 230V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Fentex, Tesla, Epcos

Supply only condenser 4 MFD, 230V, AC complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Fentex, Tesla, Epcos

Supply only heavy duty shackle type rubber reel complete all as specified and as directed by Engineer-in-Charge.

Supply only flexible wire 23/0.0076 size, three core, 1100 Volt, twisted, PVC insulated, copper conductor, multistranded for connection complete all as specified and as directed by Engineer-in-Charge. Make: Havells, Plaze, Finolex

Supply only MS nut, bolt 8mm dia of suitable size for hanging of the ceiling fans complete all as specified and as directed by Engineer-in-Charge.

Supply only MS clamp for hanging of the ceiling fans complete all as specified and as directed by Engineer-in-Charge.

Supply only down rod, MS, 15mm dia, heavy duty, 300mm long for hanging of the ceiling fans complete all as specified and as directed by Engineer-in-Charge.

Supply only down rod, MS, 15mm dia, heavy duty, 450mm long for hanging of the ceiling fans complete all as specified and as directed by Engineer-in-Charge.

Supply only PVC canopy for 1200/1400mm sweep as per existing size and make complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs ceiling fan regulator AC, 230 volts, 100 watts, electronic type, mini (step type) complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Anchor( Penta), Cona

Supply and fix in repairs ceiling fan regulator AC, 230 volts , 100 watts, electronic type, deluxe (step type) complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Anchor( Penta), Cona

Supply and fix in repairs new metal blades suitable for ceiling fan of 1200mm sweep complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply and fix in repairs new metal blades suitable for ceiling fan of 1400mm sweep complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply and fix in repairs new metal blades suitable for exhaust fans of size 450mm complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply and fix in repairs new metal blades suitable for exhaust fans of size 600mm complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply and fix in repairs new metal blades suitable for exhaust fans of size 300/380 mm complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Supply and fix in repairs new metal blades suitable for pedestal/air circulator fans of 400mm sweep complete all as specified and as directed by Engineer-in-Charge. Make: Usha, Crompton Greaves, Khaitan

Cutting openings, through brick walls built in cement mortar for exhaust fan of any size, cleaning and stacking bricks, removing surplus serviceable bricks, etc.. to store, rubbish outside MD land and making good in cement concrete 1:2:4 type B-0 as required, rendering 10mm thick in CM (1:6) to match with the existing surfaces including grouting of bolts for mounting of exhaust fan complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing old surfaces of ceiling fan/exhaust fan of any capacity or sweep, by scrapping and removing dust etc and filling cavities with one coat of filler and applying synthetic enamel paint by spraying and writing MES Nos in block letters as per existing complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs ceiling rose, surface bakelite, 65 x 35, two to three terminals, AC, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully storage type electric water heater (Geyser) of any capacity. carrying out servicing including replacement of various size screws and clamps, base assembly, washers, glands of all types/ valves / heating elements / Thermostat pipes / drain plug / thermal cut-out / safety valve and to ensure water tightness and worn out minor parts including re-fixing in the position after testing complete all as specified and as directed by Engineer-in-Charge. Note : Base plate assembly, Heating elements, thermostat pipes, thermal cut out and safety valve will be measured and paid separately as "Supply only."

Supply only base plate assembly of 25/50 ltrs capacity geyser complete with inlet, outlet and thermostat pipes complete all as specified and as directed by Engineer-in-Charge.

Supply only heating elements of capacity 1.5/2 KW, AC, 230 Volt complete all as specified and as directed by Engineer-in-Charge.

Supply only thermal cut out, suitable for 25/35/50 ltrs capacity geysers complete all as specified and as directed by Engineer-in-Charge.

Supply only indicator neon lamp, any colour complete all as specified and as directed by Engineer-in-Charge.

Supply only 15mm bore safety valve/high pressure release valve, ISI marked complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC heavy duty connecting pipe of 15 mm dia and 450 mm long with adaptor complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC heavy duty connecting pipe of 15 mm dia and 600 mm long with adaptor complete all as specified and as directed by Engineer-in-Charge.

Material and labour for geyser inner tank bracing and arresting leakage of any type complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparing old surfaces of geyser of any capacity , by scrapping and removing dust etc and filling cavities with one coat of filler and applying synthetic enamel paint by spraying and writing MES Nos in block letters as per exisitng complete all as specified and as directed by Engr-in-Charge.

Chaudhary Enterprises

Radha Engineering Services

SHREE SHIV SHANKER ENTERPRISE