Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹4.4 LAdmitted-Finance | -42.33% | ₹4.4 L | L1 | Admitted-Finance |
| 2 | L2₹4.5 LAdmitted-Finance | -40.22% | ₹4.5 L | L2 | Admitted-Finance |
| 3 | L3₹4.7 LAdmitted-Finance | -38.56% | ₹4.7 L | L3 | Admitted-Finance |
Updated dates
Tender Value
₹7.6 L
EMD Value
₹15,200
Closing Date
19 Feb 2026, 4:00 pmClosed
Er Rajesh Kumar
Executive Engineer PWD R and B Division Basohli
Please refer in BOQ
2026_PWDJK_301109_8
e-NIT No.58 of 2025-26 Dated 21-01-2026
Open Tender
Civil Works
90 days
Basohli
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD R and B Division Basohli
₹15,200
Executive Engineer PWD R and B Division Basohli
24 Apr 2026
21 Jan 2026
20 Feb 2026
22 Jan 2026
19 Feb 2026
24 Jan 2026
23 Jan 2026
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of surplus excavated earth as directed lead upto 1mtr. from cutting edge. a) All kinds of soil.
Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size).
Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:6 coarse sand:6 graded stone aggregate 20mm nominal size) with 20% boulders.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size).
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand).
Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
12mm Cement plaster of mix: a) 1 : 6 ( 1 cement : 6 fine sand)
15mm Cement plaster on the rough side of single or half brick wall of mix: a) 1 : 6 ( 1 cement : 6 fine sand)
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. A) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Centering and shuttering including strutting, propping etc.and removal of form work for :
Foundation, footings, bases of columns etc. for mass concrete.
Columns, pillars, piers, abutments, posts and struts.
Add cost for SAMAGRA logo (LMR)
Carriage of the following materials by Mechanical Transport / Heal Load from source to site of work incl. loading, unloading and stacking complete :-
Sand from Billawar for an average lead of 45.00 Km. by M.T. & 500 mtr. by H.L.
Stone aggregate below 40mm nominal size from Bhini crusher for an average lead of 45.00 Km. by M.T. & 500 mtr. by H.L.
Stone aggregate 40mm nominal size & above from Bhini crusher for an average lead of 45.00 Km. by M.T. & 500 mtr. by H.L.
Stones / boulders from local nallah for an av. Lead of 5.00 km. by M.T. & 500 mtr. By H.L.
Bricks from Kathua for an average lead of 83.00 Km. by M.T. & 500 mtr. By H.L.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.20 MB
BOQ_976949.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid