ADDN/ALTN TO BUILDING NO P-117 (TRANSIT ACCN), SPECIAL REPAIR TO BUILDING NO P-04 AT HALDIGHATI LINE MG ENCLAVE IN ZONE-III AREA AND ADDN/ALTN OF OFFICERS MESS BUILDING NO P-371 OF HQ INF BDE IN ZONE-III AREA UNDER GE(S) JAIPUR AT JAIPUR MIL STN

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Excavation in soft / loose soil for post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for earth filling including spreading and levelling in layer not exceeding 25 cm thick including watering and well ramming complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies 25 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note :- Reinforcement and form work shall be measured and paid separately.

M&L for RCC (nominal mix) 1:2:4 type B0 using 12.5 mm graded stone aggregate as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed. Note :- Reinforcement and form work shall be measured and paid separately.

M&L brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work using old size bricks with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in Brick walls/RCC cutting not exc 10 cm girth complete all as specified and directed.

M&L for cutting holes in brick walls not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L for 50mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self-faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

M&L for Form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished concrete surfaces complete all as specified and directed.

M&L for Form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.

M&L second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed.

S&F factory made uPVC white colour casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 150 mm long complete all as specified and directed.

S&F brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 300 mm length of bolt complete all as specified and directed.

S&F Butt hinges,heavy weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F brass handle of 100mm size, cast type, polished bright complete all as specified and as directed.

S&F Mortice lock, vertical type, size 100 mm, 2- lever brass body with two keys complete all as specified and directed.

S&F harrison rail (curtain rail) mild steel chromium plated with fixing brackets ,stops, rollers etc complete as all specified and directed.

S&F brass CP tubular towel rail, 20mm dia, 60cm long between flanges etc. complete as all specified and directed. Make : Jaquar CAT Part No AKP-CHR-35711PS / Kohler CAT Part No K-5630IN-CP / Grohe CAT Part No 40366EN1 or equivalent make as approved by GE.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 150 mm complete all as specified and directed.

S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed.

S&F stainless steel handles, fancy type, of 100 mm size complete all as specified and directed. Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE.

S&F stainless steel handles, fancy type, of 150 mm size complete all as specified and directed. Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE.

S&F 25 mm dia stainless steel, wood finish, fancy type, anti-rust curtain rod with wooden curtain bracket with finials etc. for doors / windows fixed by self screw in wall complete as all specified and directed.

M&L for mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bar 5 mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F rolled mild steel section as in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed

S&F rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for powder Coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21, 100 mm long (2 No) , suitable handle (1 No) complete all as specified and directed. Note-Glass and other filling material in panels shall be measured and paid seperately

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based Mangalore tile pattern steel sheet of 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 18-20 mm thick High Density high moisture resistant (HDHMR) board for kitchen cupboard / door shutter of Action tesa / Pearlwood or equivalent make as approved by GE, one side colour / white laminate and other side decorative as in modular kitchen / cabinets / door shutter fixed with minifix hardware wherever required including edge band 22mm wide, 0.80mm thick of matching colour on exposed surfaces of board fixed with polymaster adhesive of REHAU make or equivalent including trimming edges of edge band to true line of thickness of board by manual trimmer, fixed to wall etc. complete all as specified and directed.

M&L for 8 mm thick HDHMR (High density high moisture resistant) board of Action tesa / Greenply or equivalent make both side white laminate as in back of kitchen cabinets/portion of cupboard etc complete all as specified and directed.

M&L for 18-19 mm thick prelaminated Medium Density Fiberboard (MDF) board, both side laminated (BSL) ISI marked and confirming to ISI-14587(including amendments), in door, shelves, partition, cubboad, almirahs, book cases, boxes, racks or similar work fixed with suitable pins, screws and adhesive complete all as specified and directed.

M&L for suspended false ceiling (Make - Armstong ANF AH 95 or equivalent as approved by GE) of mineral fiber board, size of 600 x 600 x 15 mm ceiling tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Make Armstorng or equivalent make including necessary hanging system arrangement which is required to be made from existing RCC roof /stone /slab /AC sheet of existing ceiling complete all as specified and directed.

M&L for machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing on treads of step and landing of stair including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 40 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for designer rubber moulded cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors, cut and polished with grey cement and no pigments over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for designer rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for cool ceramic tiles of size 30 cm x 30 cm x 9mm with Solar Reflectance Index (SRI) not less than 78 for roof surface set and jointed with epoxy grounting and minimum 3mm spacer and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Make : Johnson / Orientbell / AGL or equivalent make as approved by GE.

M&L for 10 to 12 mm thick matt finish / Glossy coloured tiles of design as approved, (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for rendering 05 mm thick in CM 1:3 on fair faces of brick work or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 10 mm thick in CM 1:3 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 as in ceiling surface and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering on stone masonry or other than fair faces of brick work of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper (OBD) over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new surface of wall of any description and applying two coats of oil bound distemper (OBD) over and including 1 mm thick wall putty all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling by complete removal of existing treatment and applying two coat of oil bound distemper (OBD) over a coat of alkali resisting priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of distemper oil emulsion over a coat of alkali resisting priming paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of acrylic emulsion exterior graded weather proof paint over a coat of primer complete all as specified and directed. Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE. Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc.

M&L for preparation of new surface of walls of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed. Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE. Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc.

M&L for preparation of new surface of walls of any description with a coat of 2mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed. Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE. Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work upto four storey building etc.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F figured glass 5 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

S&F figured glass 4 mm thick, pin head type and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till shining complete all as specified and directed.

M&L for preparation of new or previously untreated plastered or concrete surface of any description, over 10 cm in width or girth and apply two coat of plastic emulsion paint over a coat of primer and including 2 mm thick putty on wall complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of wall of any description, and apply two coat of plastic emulsion paint over a coat of primer and including 1 mm thick wall putty complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F Low density polyethylene pipes (LDPE) outer diameter of pipe 32mm, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed

S&F in repair for 15mm bore dia of pipe brass CP, wash hand basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make : Jaquar CAT Part No OPP-CHR-15011BPM / Kohler CAT Part No 22534IN-4-CP / Grohe CAT Part No 32851000 or equivalent as approved by GE.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed.

S&F in repair waste fittings, brass, chromium plated 32mm dia for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair ball valves for 15 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gms) complete all as specified and directed.

S&F waste coupling of PTMT for 32 mm bore dia of pipe half or full threaded (minimum weight 45gms) complete all as specified and directed.

S&F in repair Stainless Steel Square Grating doom of 125 x 125 mm of Stainless Steel (minimum weight 150 gram), with or without waste hole, fixed on floor / nahani trap complete all as specified and directed.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 grams) complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F cast iron soil, waste and vent 100 mm bore of pipes (sand cast) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F cast iron soil, waste and vent 100 mm bore of pipes (sand cast in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.

S&F bends (any radius) with duck's foot or heel rest for 100 mm bore of cast iron pipe complete all as specified and directed.

S&F CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors for 100 mm bore of pipe complete all as specified and directed.

S&F in repair Traps ‘P’ or ‘S’ for 100 mm bore CI cast iron soil ,waste and vent pipe complete all as specified and directed.

S&F in repair cast iron cowls for 100 mm bore of pipe complete all as specified and directed.

M&L for Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as pecified and directed.

M&L for cast iron floor trap with grating including jointing to waste pipe 100 mm diameter of outlet fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

M&L for cast iron nahani trap with grating including jointing to waste pipe 100 mm diameter of outlet fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

Salt Glazed stone ware (SGSW) drain pipes, grade 'A' of 150 mm internal diameter of pipe, laid in trenches and jointed in CM 1:1 complete all as specified and directed.

M&L for SGSW gully trap 100 x 100 mm square or round mouthed type 'P' complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm dia of pipe complete all as specified and directed.

M&L in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.

M&L in repair toilet paper holder , of stainless steel with flat recessed type, chromium plated, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Jaquar CAT Part No. CPA-CHR-1151 / Grohe Cat Part No. 40367000 / Kohler cat Part No. K-5633IN-CP or equivalent as approved by GE.

S&F chromium plated towel rail 600 mm long complete all as specified and directed. Make-Jaquar or euivalent as approved by GE

S&F in repair white rimless single piece EWC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap including fixing as per manufacturer instructions complete all as specified and as directed. Make : Jaquar CAT Part No OPS-WHT-15853S300UF / Kholer CAT part No. 77739T-SL-0 / Grohe Cat Part No. 39675000 / Roca CAT Part No. RS34273700H or equivalent make as approved by GE.

S&F in repair bib taps 2-in-1 cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type of 15 mm bore dia of pipe complete all as specified and directed. Make : Jaquar CAT Part No KUP-CHR-35041PM / Kohler CAT Part No 25432IN-4-CP / Grohe CAT Part No 20281000 or equivalent as approved by GE.

M&L for table top wash basins, of size 530 x 420 x 140 mm Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. Make: Jaquar Cat part No. - JDS-WHT-25907N / Kohler Cat part No - K-5373IN-0 / Roca Cat part No - RS3270Y2000 or equivalent make as approved by GE.

S&F in repair chromium plated soap dish holder complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1131N / Grohe CAT Part No. 1024612430 / Kohler CAT Part No. K-5634IN-CP / Roca CAT Part No. RF9060A1 or equivalent as approved by GE.

S&F Stainless Steel Towel Rack 600mm Long complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1181S / Grohe CAT part No. 40512001 / Kohler CAT Part No. K-17529T-CP or equivalent as approved by GE.

S&F in repair angle stop valve, fancy type chromium plated cast copper alloy, for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. Make:- Jaquar CAT Part No OPP-CHR-15053PM / Kholer CAT part No. 11568IN-7B-CP / Grohe CAT Part No 2201600M or equivalent as approved by GE.

S&F in repair for 15mm bore, 3-in-1 wall mixer, brass CP, fancy type, for mixing hot & cold water, having connection for overhead and hand shower and including screwed down for iron pipe or for union along with spout complete all as specified and directed. Make:- Jaquar Cat part No. FUS-CHR-29281 / Grohe Cat Part No. 23198000 / Kohler cat Part No. 99460IN-4-CP or equivalent as approved by GE.

S&F in repair waste coupling of brass CP for 32 mm bore dia of pipe half or full threaded with long shank complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. Make : Jaquar CAT Part No OPP-CHR-15037PM / Kohler CAT Part No 16093IN-4-AF / Grohe CAT Part No 20237001 or equivalent make as approved by GE.

S&F in repair brass chromium plated overhead shower rose of 300 X 300 mm size, square shape, without revolving / swivel joint complete all as specified and directed. Make : Jaquar CAT Part No OHS-CHR-1629 / Grohe Cat Part No. 26563000 / Kohler cat Part No. K-73040IN-CL-CP or equivalent make as approved by GE.

S&F in repair health faucet (hand shower) chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube with non return valve and wall hook including making connections and fixed in position complete all as specified and directed. Make : Jaquar CAT Part No ALD-CHR-577 / Kholer CAT Part No K-12927IN-CP / Roca CAT Part No RF9060A1 or equivalent make as approved by GE.

S&F in repair hand shower round shape of 105mm dia, ABS (Acrylonitrile Butadiene Styrene) body with a chrome-plated finish, a face plate, multi-flow functionality, equipped with a cascade effect, with cleaning system for easy cleaning and including 1.5m long flexible chrome tube complete all as specified and directed. Make : Jaquar CAT Part No HSH-CHR-1721 / Kholer CAT Part No K-72421IN-CP / Roca CAT Part No ‎RF5B1B03C07 or equivalent make as approved by GE.

S&F in repair for 15mm bore dia of pipe, brass CP, wall mounted basin mixer (with minimum weight 1.2 Kg) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. Make : Jaquar CAT Part No QQP-SSF-7433PM / Kohler CAT Part No 5681IN-4ND-CP / Grohe CAT Part No 19571002 or equivalent make as approved by GE.

S&F in repair PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet for wash hand basin / sink complete all as specified and directed.

S&F in repair float corner glass shelve 8 mm thick 300 mm radius complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1173 or equivalent make of Grohe / Kohler / Roca as approved by GE.

S&F in repair concealed Stop Valve with adjustable wall flange, fancy type chromium plated cast copper alloy, for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. Make:- Jaquar CAT Part No VGP-CHR-81083K / Kholer CAT part No. K-16087IN-4-CP / Roca CAT Part No RT5A1509CAH or equivalent as approved by GE.

S&F in repair liquid Push Button Soap Dispenser of brass fixed with and including chromium plated brass screws complete all as specified and directed. Make : Jaquar CAT Part No SDR-WHT-DJ0010FN or equivalent model of make Kholer / Roca / Grohe as approved by GE.

M&L in repair for Tumbler Holder for bathroom complete all as specified and directed. Make: Jaquar Cat part No. - ACN-CHR-1141N / Kohler Cat part No - B0835LKBZQ / Roca Cat part No - RA817021CN0 or equivalent make as approved by GE.

S&F double bowl SS sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe, overall size 940 mm x 457 mm x 205 mm, and including waste coupling fittings, brass, chromium plated 32mm dia with long screwed shanks and fly-nuts, and PVC waste pipe minimum 900 mm long suitable for 32 mm dia of outlet complete all as specified and directed. Make : Cera CAT Part No B4513122G or equivalent model of make Hindware / Kholer / Roca / Grohe as approved by GE.

S&F in repair chromium plated towel ring round (20cm dia) / square (20cm x20cm) shape (minimum weight 300gm) with round flange complete all as specified and directed. Make:- Jaquar CAT Part No. CPA-CHR-1121RD / Grohe CAT Part No. 40655001 / Kohler CAT Part No. K-5631IN-CP or equivalent as approved by GE.

S&F in repair CP Stainless Steel Wall Mounted Square Soap Dish / Soap Stand / Soap Holder, approximate size 160x 160mm fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair float corner glass (set of three) shelve 8 mm thick 300 mm radius with bracket complete all as specified and directed.

M&L for table top wash basins, of size 530 x 420 x 140 mm Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. Make: Jaquar Cat part No. - JDS-WHT-25907N / Kohler Cat part No - K-5373IN-0 / Roca Cat part No - RS3270Y2000 or equivalent make as approved by GE.

S&F for stainless steel double coat hook for wall / door complete all as specified and directed. Make:- Jaquar CAT Part No. ACN-CHR-1161N / Kohler CAT Part No. K-25073IN-CP or equivalent as approved by GE.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core (Phase - Red, Neutral - Black) PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting fitting like switches, sockets fan regulators etc. including 1.5 Sqmm single core (Green colour) PVC insulated unsheathed copper earth continuity conductor FRLS cable 1100 V grade as continuous earth wire for one light / fan / bell point controlled by one, one way switch. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 pin socket outlet 5 Amps on the same board with other switches, complete all as specified and as directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall and drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 pin 5 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate.

S&F in repair LED lights fitting 1x20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular Switch one way 6 A, 1 module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F modular bell push 6A, 1 module complete all as specified and directed.

S & F Bell Ding Dong AC 230 volts, single pole complete all as specified and directed.

S & F Modular Socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F white cover plate with frame, 3 module complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of capacity 20 Amps complete all as directed.

S&F in replacement sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of capacity 20 Amps complete all as directed.

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F in repair sheet metal enclosure factory fabricated for MCB distribution board TPN double door type concealed in wall 415 volt 12 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed.

S&F ceiling rose 3 phase, PVC / polycarbonate, isolated body complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:3:6) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm bore GI Pipe medium grade for watering complete all as shown in electrical plate No 3 of SSR Part-I(2009) and connected to earth test point including testing complete all as specified and directed. Note :- 1. PCC Chammer shall be constructed atleast 1.5 metre away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner. 2. GI wire and protection pipe upto 7.5 meter from the earth plate electrode is deemed to be included in quoted rate. 3. Excavation for earthing to be done manually and Earth resistance below 3 Ohm should be obtained after measurement for every pit.

Taking down fan / exhaust fan any type, sealing cable end, dismantling blades and removing fan and blades to MES store complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep of size 250mm complete all as specified and directed.

M&L in repair for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit / casing capping not less than 20mm and conduit accessories fixed on surface of wall / celing etc including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note : 02 Run of 06 Sqmm copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit.

S&F electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed. Note:- Connection with geyser inlet and outlet with 15mm bore GI pipe including PVC pipe is included in the quoted rate

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 40 to 63 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F electrical chimney of 90 cm size, suction capacity not less than 11550 cubic meter/hr and air outlet size not less than 150 mm motion sensor touch control, turbo speed option, dual side touch control, blower type- metallic, speed 9, energy efficient BLDC motor complete all as specified and directed.

S&F wall mounted fan, complete with three blade, copper motor, 230 V, 50 to 60 watt, 400mm sweep, with 70CMM air delivery rated, fixing accessories complete all as specified and directed.

S&F white cover plate with frame, 12 module complete all as specified and directed.

S&F PVC blanking plate one module complete all as specified and directed.

S&F LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair LED flood light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, adjustable lamp bracket with impact, corrosion resistant, adjustable, tempered glass optical cover including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make : Orient Electric Cat Part No. - LFSM-30W-C-V3, Havells Cat Part No. - JETA-ADORN-FLS-30W-LED-757-SSYMT-OTG or equivalent make as approved by GE.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed.

Demolition of stone slabs of any description or thickness, laid dry or laid dry and pointed in floor, apron etc complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete (RCC) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of rubbish from site complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

MSR INFRATECH (BID ID -3413657)

M/S Anil Enterprises (BID ID -3414562)

S.R.Enterprises (BID ID -3420814)