CERTAIN REPAIR TO TILING, JOINERY, FLOORING, ROOFING, FALSE CEILING, SANITARY WORKS, PERIODICAL WORKS AND OTHER WORK AT OTM ACCN OF MH UNDER AGE(I) FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specifed and directed.

M & L for providing chequered cement concrete tiles of size 25cm x 25cm x 22mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete.

S&F glazed coloured ceramic tiles of sizes 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles exc. 0.18 sqm but not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

…..ditto as above……. but in CM 1: 4

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm

S&F Steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified

M & L for framed work such as guard bars made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing specified in SSR.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing specified in SSR.

MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete, all as directed

S&F 35 mm thick Factory Made Plain, framed,panelled shutters(any number ofpanels), withpanels of timber flat on both sides(feather edged), orof veneered particle board mediumdensity, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F 35 mm thick Factory Made 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts.

S & F mild steel pressed handle oval type stove enameled black of size 150mm.

S&F mild steel butt hinges cold rolled of size 100mm medium weight.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors.

S & Fin repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples,rivets,wooden beads to steel windows/wodden doors/windows.

M&L for MS work 0.63 mm Mild steel, plain, black sheet as in steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc.

M&L for MS work as in Framed work as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W(Gde E- 250) quality A complete, all as directed.

S&F for Purpose made butt hinges,sliding bolt,handle conforming to Fe-290 Gde-E-165 suitable for fixing to ston concrete door and window frames all as specified and directed.

S & F in repair curtain rod PVC coated mild steel rod 20 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each.

Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete.

M&L for taking down aluminium shutter with frame any size and refixing in same opening after securely refixing all rails, styles, rubber beading, handle, lock, butt hinges including inserting tie bar of 10 mm dia at top rail etc complete all as specified and directed.

S & F Anodised aluminium frame work for door made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as hinges type 150 mm long (3 no.) suitable handle(2 No.), 150 mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified.

S & F Anodised aluminium frame work for window/ventilator made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2 no.) suitable handle(1 No.), 100mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified.

S&F sheet glass 5.5mm thick ordinary quality exc 0.5 sqm each all as specified and directed by Engineer-in-Charge.

S&F Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

S&F in repair Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

S&F in repair floor spring double type hydraulically regulated stainless steel body universal type suitable for aluminium door complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

All as per item above , but over a coat of red oxide zinc chrome primer

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover,hand shower including all fittings complete all as specified and as directed .

S&F for PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long as spd and fixed in repair all as specified and directed by Engineer-in-Charge.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks all as specified and directed by Engineer-in-Charge.

…….Ditto as above but for 1000 Ltr Capacity…………Ditto..

M & L three coat of white wash on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of chalk whitening including preparation all as specified and directed by Engineer-in-Charge.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation all as specified and directed by Engineer-in-Charge.

M&L prepartion of old wood & wood based surfces of any decsription not other wise described over 10cm width or girth and apply one coat of syn enamel paint all as specified and directed by Engineer-in-Charge.

M&L prepartion of old painted steel surfces of any decsription not other wise described over 10cm width or girth and applying onecoat of synthetic enamel paint

M & L for one coat of white wash on old decorated wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L for one coat of white wash on old decorated ceiling surfaces including preparation all as specified and directed by Engineer-in-Charge.

M & L One coat of Oil bound distemper on old decorated wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

M&L for Complete Removal of existing treatment including preparation of old surface and applying Two coat of oil bound distemper over a coat of alkali resistant primer over 1mm thick wall putty including preparation all as specified and directed.

M & L one coat of Cement based paint on old decorated wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

Complete Removal of existing treatment including Preparation of old surfaces and applying Two coat of Cement Base Paint on walls over alkali resistant primer all as specified and directed by Engineer-in-Charge.

M&L for Complete Removal of existing treatment including Preparation of old surfaces and applying Two coat of acrylic emulsion, exterior grade, weather proof paint any colour on walls over alkali resistant primer over 1mm wall putty all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old surfaces and applying one coat of acrylic emulsion, exterior grade, weather proof paint any colour on walls all as specified and directed by Engineer-in-Charge.

M & L for one coat of colour wash on old decorated wall surfaces including preparation all as specified and directed by Engineer-in-Charge.

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position all as specified and directed by Engineer-in-Charge.

M & L for 2nd class hard wood scantling as in frame work all as specified and directed by Engineer-in-Charge.

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering all as specified and directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed

….Ditto as above but accept sheet………….Ditto……….

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) including rivets, seals etc , complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction.

S&F 5 to 8mm thick PVC hollow wall panelling fixed to wall with L or U shaped beading at ends fixed with screws

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified.

M&L PCC type C-2 (1:3:6) (20mm stone graded aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

M&L 50 mm thick PCC 1:2:4 type B1 using 20mm graded stone agg as in flooring,finished even and smooth using extra cement all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment , over 20 mm th sand filling all as specified and directed.

S&F in repair wall mounted Surgical stainless steel scrub sink double station type of overall size 121x48x57cm with 26cm deep tub and 30cm high backsplash with stainless steel coupling and waste pipe complete all as specified and directed.

S&F in repair elbow operated bib cock 15mm size fancy type chromium plated brass with extended lever handle and wall flange complete all as specified and directed.( CAT part no. FLR-CHR-5043N of Jaquar or euivalent of other make).

S&F in repair elbow operated pillar cock 15mm size fancy type chromium plated brass with extended lever handle complete all as specified and directed.( CAT part no. FLR-CHR-5031N of Jaquar or euivalent of other make).

Taking up or down Steel Tubing bore of pipe in 15mm and connections, and removal to store etc complete all as specified and directed.

All as per item above but of 20mm bore complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

All as per item above but of 20mm bore complete all as specified and directed.

M/S S P CONSTRUCTION

M/S WASEEM KHAN CONTRACTOR

m/s udit constructions

M/s Moti Babu Agarwal

M/S SRI JAGDAMBE TRADERS

M/S shree traders