Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹30.3 L+₹2.0 L (6.94%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹30.7 L+₹2.3 L (8.20%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
7 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Delhi Cantt-10
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE BR-I AGE BR-II AND AGE E/M UNDER GE CENTRAL DELHI CANTT-10
2022_MES_523693_1
GE/C-18/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Delhi Cantt-10
PROVN OF CERTAIN SANCTION WORK IN THE AREA OF AGE BR-I AGE BR-II AND AGE E/M UNDER GE CENTRAL DELHI CANTT-10
9 documents required · 9 mandatory
₹500
Yes
GE (Central) Delhi Cantt-10
₹56,000
Yes
15 Jun 2022
12 May 2022
9 Jun 2022
12 May 2022
7 Jun 2022
26 May 2022
12 May 2022 - 26 May 2022
60 days
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose /soft soil and getting out complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm thick PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc complete all as specified..
M&L for 15mm thick screed bed in CM ( 1:6) complete all as specified and directed by Engr-in-Charge.
M & L for Chequered cement concrete tiles 20cm x20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified.
M & L for 75 mm thick cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement including filling the joints with bituminious mastic filling complete all as specified.
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.
M&L for rendering 15mm thick in cement mortar 1:4 without using extra cement including taking down cement plaster and aplying prepretion of new surface two coat of cement based paint over 2-3mm wall care putty complete all as specified.
M&L for MS Work as in angle or Tee Roof trusses (framed), trussed,purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) qualityA Complete all as specified and directed.
S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
Cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast /lugs measured from the face the jambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, using 20mm graded stone agg complete all as specified upto six storey height.
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.
100 mm long mild steel butt hinges, medium weight, cold rolled and fixed.
Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregates, in foundation filling and mass concrete complete all as specified..
S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.
S&F only 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified.
M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified.
Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil materials n.exc 50m and depositing where directed at a level complete all as specified.
M&L for 25mm thick PCC 1:2:4 Type B-0 Using 12.5mm gradede crushed aggregate as in floor surface all as specified and directed complete. filling and mass concrete complete all as specified.
S&F Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L for 2mm green Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified.
M&L for roof treatment as per the description below :- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 3.5 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield aluminum paint all as specified.
S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with 20mm dia brass float valve of any description complerte all as specified and directed by Engineer-in-Charge.
S & F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of block shall be of 2 Qtrs on each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge
S&F powder coated ( 50 micron thick) aluminum frames for windows/ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified.(Make : Jindal/Hindalco/Indal)
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F 4mm thick pin headed glass (figured) panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on Aluminium Frame as per specifications and drawing
S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified & directed by Engr-in-Charge.
M&L FOR MS lat for roof sheets and brassing, incl securing bolt,drilling holes and washer /using ERW OR Induction butt welded ,Complete all as specified.
Supply and fix 300mm long, mild steel, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified.
M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete all as specified & directed by Engr-in-Charge.
S&F Powder coated 50 micron,anodised aluminium windows and ventilator shutters, fixed type without sash bars, etc;aluminium section weighing 0.55 kg/m includingnecessary joining cleats glazing clips rubber packing aluminium anodised snap beading screws etc complete all as specified .
Supply and fix factory made solid PVC door Shutter, 30 mm thick (stiles), consisting of frame made of ms tubes for top and bottm rail,ms frame shall be covered with heat moulded plain colour PVC C channel having PVC sheet strip of 20mm with struck inside with solvent cement for stile and plain colour PVC sheet for top rail ,lock rail ,bottom rail and other side,& as gap inserted for toprail and bottm rail ,panelling of plain colour PVC sheet to be fitted on MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading ,and jointed together with solvent cement,fixing the frame at site as per specification as directed by Engr-in-Charge.
Supply and fix factory made PVC Chowkat/ Door frame (Make: Rajshri plastiwood laminated or equivalent) of size 50 X47 mm with a wall thickness of 5mm, made out of extruded 5mm thick single side prelam PVC sheet coloured, reinforced with 19 X 19 mm MS Square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets complete all as specified and shown on drawing .
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
Supply and fix 200 mm long mild steel barrel tower bolt , complete all as specified
Supply and fix extruded aluminum alloy handles fabricated type anodised of size 150mm long.
Taking up or down 15 mm dia GI tubing and connections complete all as specified.
Taking up or down 20 mm dia GI tubing and connections complete all as specified.
S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, pipes should be painted with bituminous paint of approved quality complete all as specified and directed
S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.
M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab of size 550x550mm as in flooring 18-20 mm thick over 15mm cement screed in cm (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
S&F brass chromium plated tubuler towel rail 20mm dia D type 60cm long between flanges including a pair of CP brass brackets, complete all as specified.
S&F bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.
S&F Fibre glass reinforced plastic door frames shall be three lagged of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame mouloded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in al the three lags. The frame shall be covered with fible glass from all sides. MS stay shall be provided at the bottom to steady the frame.
S&F FRP Door shutter shall be 30mm thick glass Fibre Reinforced Plastic (FRP) Pannelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyster resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned woode inside at required places for fixing of fittins, cast monolithically with 5mm thick FRP panels and incl hinges, trowel bolt, handle etc confirming to IS 14856-2000.
S&F chromium plated brass stop cock/angle valve fancy type screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified .
S & F wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets including waste pipe complete all as directed.
S & F waste fitting 32mm dia brass chromium plated for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, complete all as specified.
S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms)
S&F CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified.
Supply and fix PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.
S&F aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.
S & F 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.
S&F PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips complete all as specified. Make of glass ModiGaurd/Atul/Saint Gobian
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L 20 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in CM 1:2 all as per specified and directed.
S&F DWCPE(SN4) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.
M & L for preparation of new plastered surface of wall and jallies and applying two coat of cement based paint over one coat of primer from the same manufacturer including scaffolding if required complete all as specified and directed.
S&F for 100mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.
Roughening surfaces of old concrete floor by picking sweping clean and washing down with water to remove dust etc. complete all as specified.
M&L for Vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
All as per item no 73 above but as skirting over including 10mm thick rendering in CM 1:4 incl demolition of existing PCC /Terrazo skirting all as directed
All as per item no 73 above but as skirting over including 10mm thick rendering in CM 1:4 incl demolition of existing PCC /Terrazo skirting all as directed
M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction.Inc. two coat of white wash lime
Rough execavation n. exc 1.5 m deep and getting out in soft/ loose soil.
M&L for Cement concrete 1:3:6 type B-2 (using 40mm aggragate ) Sub base 75 mm thick all as specified.
Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. and making good disturbed surfaces of walls, floor etc.
Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified.
Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified.
M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.
(a) One light /Ceiling fan/exhaust fan point controlled by one switch.
(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit in new M S steel terminal boxes modular including one run of using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified
M&L switch Modular type 6 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.
M&L switch Modular type 16 Amps one way 230V AC complete all as specified.
M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.
Supply & Fix Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body.
M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 2.5 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 4 Sqmm size stranded conductor as earthwire
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size stranded conductor as earthwire.
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed
M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 40 Amp "C " curve
M&L MCB SP 6 to 32 Amp "C" curve.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.
Supply and fix 12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. Note BLDC Fan should work on existing electronic fan regulator.
S&f Wall mounted fans AC single phase 230/240 V, of size 400 mm sweep, speed RPM 1400,Sturdy and shock proof body for fixing of wall fan complete.
Supply and Fix 100 W High efficient LED Flood light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV for fixing the light fittings on Wall fixed complete as specified and directed.
Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.
M&L in replacement MCCB 125 Amps, 16 KA , 4P, 415 Volts, 50Hz , with thermal magnetic setting.
Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete
S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.
Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store all as specified and directed.
M & L for Point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia ) 1100 volts in new PVC concealed conduit and new MS steel terminal boxes not less than 1.6 mm thick of required size (factory made) terminal boxes and with top cover of 3 mm thick hylam sheet of white colour including one run of 1.5 SQMM FRLS 1100 Volts copper conductor cable (green colour) as earth continuity connected to common earth for one light point complete all as specified and directed by Engr-in-Charge for the followings:-
(a) One light /Ceiling fan/exhaust fan/ bell point controlled by one switch.
All as per item No 110 herein before but with 4 sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete.
S & F switch piano, flush type, single pole, 5 Amps 230Volts ISI Marked complete.
M& L Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
S & F switch piano, flush type, single pole, one way 15 Amps 230 Volts.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltr having heating element 1.5 KW and not less than 5 star rating complete all as specified and directed .
M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed.
Supply,laying in repairs of PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete all as specified and directed by EIC.
M&L for dry river sand filling in trenches as cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified and as directed by EIC.Note :- Punned thickness only shall be measured and paid.
Supplying laying sub class ‘B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.
Schedule of Credit
PRAHLAD NARAIN KOLI
M/s SAAR ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .