Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-Finance | L1 | Accepted-Finance BOQ Rate accepted | |
| 2 | L2₹27.9 L+₹3.1 L (12.4%)Accepted-Finance TAMIL NADU N | KANCHIPURAM | TAMIL NADU | 600069 | L2 | Accepted-Finance BOQ Rate accepted |
| Sl No | Description | Qty | Unit | R.K.V. ENTERPRISES | KAMATCHI INDUSTRIAL SERVICE |
|---|---|---|---|---|---|
| 1.00 | Fabrication and supplying of new MS Grill made with outer frame with MS Angle ISA 40 x 40 x 6mm angle in all four directions and providing MS flat 32 x 8mm in equal spacing @ 40mm c/c in transverse direction and MS flat size 32 x 6mm in sine curve pattern spacing at 40mm c/c for base width of 125mm in transverse direction, The rate is inclusive of removal of damaged grills, supply of new grills including fabrication charges, labour, and welding and cutting charges, all wastages, lead, lift, etc., complete and providing one coat of red oxide primer and two coats of enamel paint over the fabricated grill surfaces, transporting charges to site etc., complete. a) M.S. Grill 1000 x 380 mm | 122 | Sets | 16,50,050 ₹19,47,059 Lowest | 17,08,000 ₹20,15,440 |
| 1.20 | b) M.S. Grill 500 x 380 mm | 8 | Sets | 48,000 ₹56,640 Lowest | 60,000 ₹70,800 |
| 1.30 | C) M.S. Grill 300 x 380 mm | 6 | Sets | 18,000 ₹21,240 Lowest | 24,000 ₹28,320 |
| 2.00 | Fabrication and supplying of new MS Edge angle made up of outer frames seating place ISA 50 x 50 x 6mm and MS flat 40 x 6mm with side support lugs in 8mm MS rod 6 with spacing 50cm c/c with proper welding, rate including removal of damaged edge angle from catch pits, cost of new MS edge angle, Fabrication charges, fixed with 8mm rod lugs securely welded with existing reinforcements, including one coat of red oxide primer and two coats of enamel paint, transporting charges, handling charges etc. complete. a) Edge angle for M.S. Grill 1000 x 380 mm | 84 | Sets | 3,02,400 ₹3,56,832 Lowest | 4,20,000 ₹4,95,600 |
| 2.20 | b) Edge angle for M.S. Grill 500 x 380 mm | 5 | Sets | 12,500 ₹14,750 Lowest | 20,000 ₹23,600 |
| 2.30 | C) Edge angle for M.S. Grill 300 x 380 mm | 3 | Sets | 3,000 ₹3,540 Lowest | 4,500 ₹5,310 |
| 3.00 | Fixing in position edge angle frame in 0m TG Floor as per specification which includes dismantling the existing concrete for a width of 110 mm along the trench sides and removal of worn out edge angle frame and damaged grills, the dismantled portion to be filled with micro-concrete using Rendroc RG/ Equivalent including neat finishing the top surface including cost of all materials, labour, lead, lift etc., complete. a) 0m Turbine Floor Grill (1000 x 380 mm) | 84 | Sets | 2,52,000 ₹2,97,360 Lowest | 3,02,400 ₹3,56,832 |
| 3.20 | b) 0m Turbine Floor Grill (500 x 380 mm) | 5 | Sets | 5,000 ₹5,900 Lowest | 10,000 ₹11,800 |
| 3.30 | C) 0m Turbine Floor Grill (300 x 380 mm) | 3 | Sets | 2,100 ₹2,478 Lowest | 2,700 ₹3,186 |
| 4.00 | Providing PCC 1:1.5:3 screed concrete for floor using OP cement with 12mm chips for 50mm thickness machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete | 100 | M2 | 1,00,000 ₹1,18,000 Lowest | 1,50,000 ₹1,77,000 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
2 Dec 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE TTPS Thoothukudi
Office of the SE Civil TTPS Thoothukudi
Replacement of the damaged MS Grills with Edge Angle Frame with New MS grills and fixing over the drain water trenches in 0m TG Bay of Unit 5 at Stage 3
2025_EB_615632_1
CE SE C TTPS 281 2025 26
Open Tender
Civil Works - Others
Item Rate
150 days
Tuticorin Thermal Power Station
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹18,000
Yes
4 Dec 2025
18 Oct 2025
3 Dec 2025
18 Oct 2025
2 Dec 2025
18 Oct 2025
Fabrication and supplying of new MS Grill made with outer frame with MS Angle ISA 40 x 40 x 6mm angle in all four directions and providing MS flat 32 x 8mm in equal spacing @ 40mm c/c in transverse direction and MS flat size 32 x 6mm in sine curve pattern spacing at 40mm c/c for base width of 125mm in transverse direction, The rate is inclusive of removal of damaged grills, supply of new grills including fabrication charges, labour, and welding and cutting charges, all wastages, lead, lift, etc., complete and providing one coat of red oxide primer and two coats of enamel paint over the fabricated grill surfaces, transporting charges to site etc., complete. a) M.S. Grill 1000 x 380 mm
b) M.S. Grill 500 x 380 mm
C) M.S. Grill 300 x 380 mm
Fabrication and supplying of new MS Edge angle made up of outer frames seating place ISA 50 x 50 x 6mm and MS flat 40 x 6mm with side support lugs in 8mm MS rod 6 with spacing 50cm c/c with proper welding, rate including removal of damaged edge angle from catch pits, cost of new MS edge angle, Fabrication charges, fixed with 8mm rod lugs securely welded with existing reinforcements, including one coat of red oxide primer and two coats of enamel paint, transporting charges, handling charges etc. complete. a) Edge angle for M.S. Grill 1000 x 380 mm
b) Edge angle for M.S. Grill 500 x 380 mm
C) Edge angle for M.S. Grill 300 x 380 mm
Fixing in position edge angle frame in 0m TG Floor as per specification which includes dismantling the existing concrete for a width of 110 mm along the trench sides and removal of worn out edge angle frame and damaged grills, the dismantled portion to be filled with micro-concrete using Rendroc RG/ Equivalent including neat finishing the top surface including cost of all materials, labour, lead, lift etc., complete. a) 0m Turbine Floor Grill (1000 x 380 mm)
b) 0m Turbine Floor Grill (500 x 380 mm)
C) 0m Turbine Floor Grill (300 x 380 mm)
Providing PCC 1:1.5:3 screed concrete for floor using OP cement with 12mm chips for 50mm thickness machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete
Supplying and providing Nito floor hard top over the existing PCC concrete surface of 5Kg/sqm and rubbed smooth with power float over the base concrete including cost of all materials, labour, lead, lift, etc complete.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_735565.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .