Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.4 L+₹41,069 (1.24%)Rejected-Finance | L2 | Rejected-Finance Higher | |
| 3 | L3₹35.0 L+₹2.0 L (5.92%)Rejected-Finance | L3 | Rejected-Finance Higher | |
| 4 | L4₹38.1 L+₹5.1 L (15.4%)Rejected-Finance | L4 | Rejected-Finance Higher | |
| 5 | L5₹39.4 L+₹6.4 L (19.4%)Rejected-Finance | L5 | Rejected-Finance Higher |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS KHASA CANTT AMRITSAR
PROVN OF RUNNING WATER IN VBS AND OTHER SANCTIONED WORKS AT NAMS
2022_MES_526557_1
GE NAMS - 16 / 22 - 23
Open Tender
Civil Works
Item Rate
180 days
NAMS CANTT
Class D
Category b i
6 documents required · 6 mandatory
₹500
Yes
GE NAMS
₹70,000
Yes
19 Aug 2022
26 May 2022
21 Jul 2022
26 May 2022
20 Jul 2022
11 Jun 2022
60 days
Amount
S&F mild steel framed work as grill, grating, guard bar, ladder etc with end of bars shouldered and or riveted or forged into spikes and similar work Conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engr-In-Charge.
Supply and erection in truly vertical position, LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP 31 -9 mtrs long single swan neck including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by Engineer in charge. Note : PCC, Earth work and MS work as cross arms clamps etc will be measured and paid separately.
Supply and laying of LT underground cable XLPE insulated, inner PVC sheathed, galvanized steel strip armoured, PVC sheathed electric power cable with stranded compact aluminium conductor 1100 volts grade 25 Sq mm 4 core confirming to IS:7098 (Part-I) with latest amendements, suitable for earthed system laid in duct/trench/along pole etc . Note : 1. The cost of Aluminium thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, DWC protection pipe will be measured and paid separately under respective items.
All as per Srl Item 4 above but 16 Sqmm, 4 core
Excavation in trenches in any type of soil by not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth below ground level for foundation of poles/ stays/cable and getting out complete all as specified .
Excavation in trenches in any type of soil by not exceeding 1.5 mtr wide but exceeding 1.5 mtr depth below ground level for foundation of poles/ stays/cable and getting out complete all as specified .
Returning, filling in, any type of soil and spreading in layers not exceeding 25cm thick each layer including watering & well ramming complete all as specified.
Removal of surplus soil to a distance not exceeding 50 mtr & depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified .
M & L for sub class 'B' bricks (old size) for cable protection laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified in SSR and directed by Eng in charge.
M&L or sand cushioning with dry and clean sand in two layers first layers of 80 mm thick before laying of cables and second layers of 150mm including pinned down of sand complete all as specified and directed by Engr in charge Note- only pinned thickness of sand shall be considered for mesurement.
Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size75 mm outer dia and 61 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make
Supply and fixing thermoplastic outdoor cable junction box hinged/screwed door type of size 200x160x 98 mm for 3 Phase and Nutral incoming cable, 3 Phase and Nutral outgoing cable with terminals and single Phase & Nutral connection for light fitting, 4 pole, 415 volt and one MCB SP 6 Amp, 240 Volt and clamp system (screw less), shock proof safe IP-55, weather proof, rust, dust and water proof internally embedded gasket with provision metric knockouts for cable entry through gland suitable for 16sq mm to 25sq mm cable as required at site complete all as specified & directed.
Material and labour for PCC 1:4:8 type D-2, using stone aggregate 40mm graded as in foundation for electric poles and making of cable duct including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.
All as per Sr items No 12 but PCC type C1 1:2:4 for copping
Supply and fixing micro prismatic reftective sheet, minimum 50 mm wide, with adhesive base for dirtectly fixing on HT/LT steel tubular/PCC pole without nail or any other fixing material at suitable height, in Red/White/Yellow colour complete all as directed.
Supply and fixing PVC insulated, PVC sheathed, multistranded copper conductor wire 2.5 Sqmm size, twin core all as specified and directed.
Supply and fixing / laying galvanized iron pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil and connecting to earth up to 6 meter length complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.
M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints.
Supply and fix LED street light fitting of capacity 100 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact resistance of IK07 with high power LEDs as light suorce with electronic chip and driver (lamp type 100 W LED) suitable for pole dia 54mm(max )complete all as specified and directed by engr-in-charge. Make :- Cat Part No ENDURAPEARLMAGNUMSL100WLED757PASYTOTG OF MAKE HAVELLS/ CAT PART NO HPLLEDSL10060E OF MAKE HPL / CAT PART NO LR02-112-XXX-57-G2 OF MAKE WIPRO.
Supply & Fixing LED flood lights 100w 230V AC OUTDOOR type with thermal management in multiple optics and equjipped with IP-66 protection, with impact and corosion resistant complete with driver and lamp complete all as specified and as dircted.
Supply and fix Timelite distribution boards of Timelite 40 Amps 3 pole 230 Volt astronomical time switch for out door use, weather and vermin proof duly painted with synthetic enamel paint made out of 3.15mm thick CRCA sheet with locking arrangement comprising of one number time switch 24 hours operation Accuracy: quartz time base +/- 1 S per day,suitable for street light operation and duly fixed on pole with clamps / Grouting on ground complete - 1set
M&L for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white , with letters, figures and conventional skull and bones in signal red and fixed with MS Clamps , bolts and nuts of approved size for LT , 20x 15 cm complete all as specified and as directed.
M & L out door type aluminuam bus bar chamber feeder box of cap 200 Amp , 3 phase, 4 wire, 415 Volts with porcelain insulator of size 90 x 60 x 45 cm made out of 3.15 mm CRCA Sheet duly painted with two coats of synthetic enameld paint over a red oxide primer and fixed and supported with anlge iron grouted in PCC 1:2:4 upto 0.30 mtr high from ground level all as directed by Engr-In-Charge.
M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on one coat of red oxide primer incl preparation of new surfaces complete.
S&F 15mm bore G.I tube medium grade fixed to wall or under floor complete including cutting chases and make good in CM 1:3 complete.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foudation and making duct incl necessary form work if required complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping complete all as specified and directed.
Supply and Laying of DI pipe socket and spigot type,Class K-7, ISI Marked with internal cement mortar lining and external zinc and bitumen coated pipe 100 MM bore with all required fittings complete with push on rubber gasket joint complete all as specified and directed.
Supply and laying of GI steel tubing 50 mm bore medium grade with fittings laid in tranches/wall/floor and joined including necessary fittings such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 40 mm bore medium grade with fittings laid in tranches/wall/floor and joined including necessary fittings such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply and laying of GI steel tubing 25 mm bore medium grade with fittings laid in tranches/wall/floor and joined including necessary fittings such as bends, elbow, tees sockets etc including necessary saddles and clamps complete all as specified and directed.
Supply & fix Cast iron sluice valve, ISI Marked 100 mm bore flanged of class 1.6 PN having spindle made out of gun metal, operating wheel nuts, bolts, packing complete all as specified and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 50 mm complete all as specified and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40 mm complete all as specified and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 25 mm complete all as specified and directed.
Cutting of existing pipe line any type including insertion of new Tee and connection of any dia DI/GI pipe complete all as specified and directed.Note:-Cost of new Tee deemed to be included in the quoted rate.
Material & labour for Brick mesonry valve pit of size 120x120x120cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.
Material & labour for Brick mesonry valve pit of size 75x75x60cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50x50mmx6mm duly painted with two coats of synthetic enameled paint over a red oxide primer including locking arrangement , brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrer and shutter including electric connection with pvc flexible twin core copper wire from ceilingrose to Exhaust fan, nut & bolt complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in and including new PVC Concealed conduit medium grade not less than 20mm dia for one fan point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick Hylem sheet top cover, sheet screws and 1.6mm thick GI sunken boxes included 1.5 Sqmm copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed. Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate)
Supply and Fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed
Supply and fixing ceiling rose 65X50 mm two to three terminals complete all as specified.
Making hole for exhaust fan and finishing of hole in wall for fixing Exhaust fan of 300 mm sweep including nut & Bolts as required, necessary brick work and plaster to match the existing surface complete all as specified.
Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia complete.
Sand cushioning to cable with dry fine sand in trenches 8cm below the cable and 15cm above the cable after laying complete all as specified.
M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat in trenches over the cableperpendicular to the direction of cable complete e all as specified in SSR and directed by Engr in Charge.
Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface
M & L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
S&F 1000 ltr capacity rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) triple layer hoisted and fixed in position incl 20mm bore ball valve PVC high pressure with palythene float and flynut and 20 dia bore gun metal globe or gate valve complete all as specified and directed.
Darshan Singh Ghai and Sons
Chander Mohan Arora Contractor
Santokh Singh and Associates
M/s MAHAJAN CONSTRUCTION CO.
M/s Vijay Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .