Shifting of 1 No. 05 KLD STP from New Majri II(A) OC Mine to Area Hospital with Operation and Maintenance (for one year) under New Majri Sub Area of Majri Area.

Amount

Civil Works :-

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet

Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:Channels, angles, tees and flats.

Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix).

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kind of soil.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift.

Carriage of Earth loading and unloading are including etc. all complete as per direction of Engineer-in-charge with a lead up to 1.00 Km.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).

Labour rate For structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Old work (one or more coats).

Labour rate for Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm.

Labour rate for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,shuttering, ifnishing and reinforcement- All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominalsize derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Maintenance Work :-

Shifting of STP plant at New Majri II(A) OC mine to Area Hospital with all equipment and electrical material with properly refixing as per required position as per direction of engineer-in-charge.

Providing 1no. Highly skilled manpower for operation maintenance and ancillary works of sewage treatment plant including filling of log book with Min -Qualification of Graduate in Chemistry/Bio-tech/Environment Scienece/Environmental Engineering on daily basis at AREA HOSPTIAL STP plant with all neceassary charges like salary of employee, transportation complete as per instruction of Engineer-in-Charge.

Maintenance and Replacement of filter media all complete as per instruction of Engineer-in-charge.

Sand Filter.

Carbon Filter.

Replacement of MBBR media (once in a year for 5KLD STP plant) complete as per instruction of engineer-in-charge..

Maintenance and overhauling of all mechanical pumps /parts for throught out a period of one year for efficient running of STP plant including necesary spares required for the work including transportation /repairing if required from outside party will be in the scope of work . A. Centrifugal mud pumps 1 nos. (0.5 HP), B. Air Blower 2Nos. (1HP), C. FILTER FEEED PUMPS (CENTRIFUGAL TYPE )1NO. (0.5 HP), D. SAND FILTER & CARBON FILTER , TOP MOUTED MULTIPORT VALVE 25 NB 2NOS., E. MEMBRANE AIR DIFFUSERS 1000X 63 MM YEARLY , F. AIR BLOWERS v Belt 24 Nos., G. AIR BLOWER OIL 320 G, H. INTER CONNECTING PIPE AND FITTING UPVC 1LOT.

Supply of chemical for dozing into STP plant and supply of scientific equipments of IS standards, priorly approved by Engineer-in-charge before supply including warranty of scientific equipments for a period of one year.

10% SODIUM HYPO-CHLORIDE

JAGGERY

NITROGEN SOURCE

PHOSPHATE SOURCE

Testing of influent and Effluent for the Parameters -PH ,TSS,BOD,COD oil & Grease, Chlroide & Sulphate once in a month( 3 copies of test report to be submitted with in 15days after collecting the sample )The sampling shall be done only from NABL accrediated labs and test reports of same shall be produced.

Supply ,installation and Commissioning of chlorine dosing system having following Technical specification pump type : Diaphgram type Dosing Capacity: 0-12 Litre/Hr. MOC:PVC Make: Milton/Edose Dosing tank capacity: 60 litre MOC:PP Pressure :4 kg/cm2.

Total impact of GST for the purpose of CTC

AGYP SCIENTIFIC WATER SOLUTION PRIVATE LIMITED (BID ID -1142020)