SPECIAL REPAIRS TO BLDG NO P-69 AT RMS BENGALURU AND OTHER MINOR WORKS UNDER GE(SOUTH) BANGALORE

Amount

S&F for PVC insulation panels 10mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of G.I Snap grid as per specification including dimantiling of existing any type of ceiling board with grid complete all as specified.

M&L for Gl frame work 605mm x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.complete all specified

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&l PCC 1:2:4 type B1 as in fillets at junctions between roof and walls, copings rounded, flat or chamfered angles complete all as specified & directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles. incl removal of dabris outside of MOD land etc complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.06 Sqm cut from same shade and size of floor tiles ofarea of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles incl removal of dabris outside of MOD land etc complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles incl removal of dabris outside of MOD land etc complete all as specified and directed.

S&F 400mmX 400mm heavy duty vitrified ceramic tiles12 mm thick (square), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles. incl removal of dabris outside of MOD land etc complete all as specified and directed.

S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding (but not backing) and removing upto Brick wall surface and removal of rubibish out side the MOD land complete all as specified and as directed.

M&L 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

S&F in reapir sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including ss waste coupling 40mm complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n. exc 4 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames n exc. 1.5 sq. m with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each complete all as specified & directed by Engineer-in-Charge.

S&F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc. complete, as specified,

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for preparation of newly surfaces of steel and iron work n exc 10 cm width or girth and applying Two coats of synthetic enamel paint over a coats of zinc chrome primer complete all as specified

S&F 30 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels,complete all as specified.

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

M & L for second class hardwood Plain, fillets exc 13 sqcm and n.exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified.

S & F for 18/ 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative type with screws confirming to IS 12823-1990 complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after preparation of surface complete all as specified and as directed.

M&L for newly plaster surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for preparing of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and as directed by the Engineer-in-charge

M&L for preparation of old decorated/paintedsurfaces of walls and cornices and applying one coat of white wash including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / dropping all as specified and directed.

M&L for washing, rubbing and brooming for preparation of existing surface and cleaning with water of old painted surfaces of walls and applying two coats of oil emulsion distemper over a coat 1 mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified

M&L for washing, rubbing and brooming for preparation of existing old decorated wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

Forming Jambs, etc to openings (to foregoing items), including cutting, toothing and properly bonding in old work also facing jointing and pointing to match existing work in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 200 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 4 mm thick figured glass pin headed type with aluminium beading & rubber gasket in square in each panes complete all as specified & directed.

S&F in Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.

Dismantling water tanks ans removing to store exc 500 & n exc 1000 litres

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed by Engineer-in-Charge.

S&F 25 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms).complete all as specified.

Supplying and laying of CPVC ball valve( Gate Valve) 25mm dia complete all as specified.

Supplying and laying of CPVC Union 25mm dia complete all as specified.

S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-450gms) complete, fixed in repairs, all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float, handle, bracket PVC short bend/ long bend etc. complete all as specified and directed .

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair vitreous china wash hand basin, white, Oval type size 520 x 450x200mm including one number brass CP waste coupling, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F 32mm waste pipe for WHB complete all as specified and as directed

S&F 15 mm bore brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule.

S&F in repair 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor/Nahani trap, plain with 100mm SS grating including solvent cement complete all as specified and as directed.

S&F pillar taps, tall height brass,fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed.

S&F in repairs PVC connection 15 mm size , 600mm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe

S&F Pressure adjustable shower rose 15mm of brass chromium plated with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC bends any radius 75mm dia complete all as specified and as directed.

S&F PVC bends any radius 110mm dia complete all as specified and as directed.

S&F PVC Single T any radius 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) 110 mm vent cowl complete all as specified and as directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n exc 150 Sqcm complete all as specified and as dircted.

S&F in repair 25mm dia stainless steel curtain rod including 2 Pair of fancy type brackets ,fixed with 45mm long mild steel screws complete all as specified

M & L 75 mm thick PCC (1:3:6) type C1 using as in plinth protections with joint cutting and joint filling with Bitumen grade 'B' etc complete all as specified.

S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S & F Fe 410 -W (Gde- E- 250) quality- B MS rectangular or Square hollow section steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified & directed by Engineer -in-Charge.

S&F in reapair 15mm dia swan neck piller tap for sink brass,fancy type, chromium plated,complete all as specified

Demolition /breaking of drain pipes of any description set in CM of 150 mm and disposing out side MOD land as directed .

Excavation in trenches n. exc 1.50 m wide and n.exc 1.5 m deep for foundationetc. and taking out complete in soft/ loose soil complete all as specified.

M&L for returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified.

M&L for removal of excavated material exc 50m but up to a distance of 100m and depositing where directed complete all as specified.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation concrete complete all as specified.

M&L PCC (1:2:4) Type B-1 using 20 mm graded stone aggregate as in benching of manholes, Coping including forming centre channels half round or 1/4 section complete all as specified.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds stopped complete all as specified..

M&L for laying of DWCPE sewage pipes line 200mm dia bore of pipe incl sealing of joints, fittings etc complete with collars complete all as specified.

M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing and under surrounding pipes with concrete after they are laid and tested for 200 mm dia pipe complete all as specified.

M&L for Pre cast RCC (1:2:4) type B1 for cover slab after removal of old existing broken slabs for man holes and set in cement mortar (1:4) and disposed off from site as sch of credit materials out side the MOD land complete all as specified.

M&L for mild steel TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismenteled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required

Demoliton of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 100 mm thick PCC 1:4:8 type D-2 using (40mm graded stone aggregateas) in sub base etc complete all as specified & directed

M&L 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishing complete all as specified .

M&L for chequered cement concrete tiles 40cm x 40cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors etc complete all as specified.

M&L for Glass stainless steel corner Shelf Complete all As specified

S&F Cabinet Mirror 300mmX 450MM complete all as specified.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largen gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

S&F 50mmx50mm Welded steel wire size of 3mm dia fabric not exc 4kg supplied and fixed complete to wood or steel members complete all as specified.

M & L For surface dressing n exc 15cm deep in soft / loose soil complete all as specified and as directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plaster surfaces of wall over 10 cm width or girth and applying Two coats of synthetic enamel paint over a coats of priming paint plaster coat complete all as specified

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.

M & L 100mm thick cement concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed.

S & F chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigments, set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M & L point wiring with 1.5 Sqmm PVC insulated unsheathed multistranded single core copper conductor cable in PVC casing capping incl modular type steel sheet pressed terminal box (surface mounted) with 2mm hylium thick sheet incl 1.5Sqmm PVC insulated copper conductor earth continuity wire.

(a) One light point controlled by one switch

(b) One bell point controlled by one switch

(c) One fan point controlled by one switch

(d) One socket outlet 5Amps on same board

(e) One socket out let 5 Amps on independent board

All as per item no 122 above but for socket outlet 15 Amps on independent board with cable size of 4 Sqmm and earth continuity conductor cable of size 4 Sqmm complete all as specified and as directed.

S & F switch piano flush type single pole one way 5/6 Amps complete all as specified and as directed.

S & F socket out let 5 pin 5/6 Amps flush type multipurpose complete all as specified and as directed.

S & F of switch piano 15 Amp 230volt, flush button single pole one way complete all as specified and as directed.

S & F socket outlet 2 in 1, 3pin 5/6 Amps and 3 pin 15/16 Amps flush type complete all as specified and as directed.

S & F switch bell push flush type single pole one way 5/6 Amps complete all as specified and as directed.

S & F Bell Ding dong AC 230 volts, Single pole complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and as directed.

S & F Ceiling rose surface type 3 terminals to be fixed on PVC block complete all as specified and as directed.

S & F surface mounted mini Mirror light LED batten 2 feet with extruded aluminium housing and robust construction 10W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose

S & F surface mounted mini Mirror light LED batten 2 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose

S & F LED Bulkhead light fitting 10 watt environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge lit LED luninaire comprising of high brightness LEDs including connection of flexible copper wire 2 core from fitting ceiling rose / connection point complete all as specified and as directed.

M & L for sub main wiring (surface) complete with two single core 06 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable one single run of 4 Sqmm FR PVC insulated unsheathed stranded copper earth cable (drawn through in and including 20mm dia PVC conduit pipe accessories including elbow, tee) connected to common earth dolly complete all as specified and as directed. Note : Two run of 06 sqmm and one run of 4Sqmm earth wire and PVC conduit has been measured as one unit for payment. Bidders are requested to quote accordingly.

S & F of ceiling fan 1200mm sweep complete with three blades, down rod, accessories 230V, with squirrel cage induction motor including connecting up with twin core twisted flexible copper conductor cable including taking down of existing ceiling fan and deposited the same to MES store yard complete all as specified and as directed.

S & F of metal body sound proof Exhaust fan 300mm size with single phase 230volt 900RPM with louvers complete making a hole in wall and finishing work disturbed surface of wall including taking down of existing Exhaust fan and deposited to MES store yard complete all as specified and as directed.

S & F PVC body sound proof Exhaust fan 250mm size with single phase 230volt 900RPM with louvers , made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm complete, making a hole in wall or existing windo grill cutting and 12mm plywood suitable size of exhaust fan make hole and fixing the window nut bolt washers and after finishing wirk disturbed surface of wall including taking down existing exhaust fan and deposited the same to MES store yard complete all as specified and as directed.

S & F sheet metal enclosure SPN for DB's when MCB's to be used with 200 Amps bus bar 240 volt double door 12 Way complete all as specified and as directed.

S & F MCB DP 32/40 Amps complete all as specified and as directed.

S & F MCB SP upto 40Amps 240 volts all as specified and as directed.

S & F water heater storage type electric capacity 25litres, steel body with copper inner ank and heating element upto 2 KW, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and including connecting up with three core copper conductor cable with 15Amps plug top including dismantling old one deposit to AGE E/m Store yard complete all as specified and as directed.

M & L earthing complete with GI earth plate Electrode 60cm x 60cm x 6mm thick burried directly in ground (earth plate not less than 2.25metre deep below ground level) with top edge of the plate not less than 1.5metre below normal ground level connected to galvanished earth wire 4.0mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including GI pipe 15mm dia light grade for earth wire protection, necessary excavation, earthwork in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified and as directed.

SREE CONSTRUCTIONS

Elite Constructions