Repair, Raising boundary wall and Fixing precast drain cover of affordable, LIG and MIG house in Sector-22D, YEIDA WC-02

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) DAR/SOR-2020 15.2.1

B/W with bricks of class 150 in supperstructure plinth in CM 1:4 (Based on UP PWD SOR 2020) Cement Mortar 1:4 (1cement : 4 coarse sand)

12 mm cement plaster of mix: 1:6 ( 1 cement : 6 coarse sand) SOR 13.4.2

Cement concrete with 2cm guage approved stone ballast, coarse sand and cement in the proportion of 4:2:1 including supply of all material, labour, tools & Plant etc required for proper completion of the work. SOR-20/Chap-5/279(a)/P-17-18

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note:- Cement content considered in this item is@330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.up to plinth level Thermo-Mechanically Treated bars./cold twisted bars

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. (UPPWD/SOR-2020/5.9.6

Finishing walls with water proofing cement paint of required shade: New work (two or more coats applied @3.84 Kg/10sqm.) (UPPWD/SOR-2020)/13.44.

Removing of 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Painting with synthetic enemel paint of approved brand and manufacture to give and manufacture to give an even shade: Two or more coats on new work. (UPPWD/SOR-2020/13.61.1

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer in-charge. (UPPWD/SOR-2020/23.9

Please Enable Macros to View BoQ information