Repair to brick works, plaster, fencing and RCC Cols, beams of Boundary Wall at certain MES installation under the AOR of AGE W/S-II and AGE E/S-II area under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water inclu taking down roots of trees complete etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1cement : 4coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 KG of cenemt per square meter, top layer 15mm grit plaster using white cement in the top layer with the items of washed marbal stone chipping grit palster 1:1/2:2 (1 white cement : 1/2 coarse sand: 2 marbal stone chipps 10 mm nominal size) including pigment (colour) to be added as per approval by Engr-in-Change in pannel with groove all around as per approval pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed (Note:-Providing groove shall be paid separetly).

M&L for forming groove of uniform size 15mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approval pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

S&F in repairs concentrina coil fencing wire punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478gm/ meter and fixed the same with existing Y shape angle iron with 6 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with GI staple and GI Clips to retain horizontal all complete all as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to ny type of standard rails straining bolts ipcluding securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured)

M&L for applying two coats of weather proof exterior enamel paint over priming coat of exterior primer on new or untreated plastered surfaces using brush for priming coat and 1st coat and 2nd coat with airless spray technology with max woring pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure.

Tool and plant for complete removal of existing by scrapping with mechanical wall sander (having meahanical vacuum meahanism) having RPM not less than 1500, sanding pad of 80 Grit having dia 7"/9" to make he surface free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint using brush for first coat and secound/ fianl coat with Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max materials hose length of 30 mtrs the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure.

Demolition of reinforcement concrete work of any description and in any position not other wise provided for complete all as specified and directed.

Dismantling of brick work built in cement mortar including all quions arches, pillar wtc but excluding ashalar fencing dressed stone and pre-cast concrete articles

M&L for brick work using sub class 'B' brick old size in cm (1:6) straight or curved on plan exceeding 6.00 mtr mean radius, complete all as specified and directed.

All as per item No. 12 but except bricks complet all as specified and directed.

Removing mortar form and cleaning brick stacking for measurement including all extra handling and removal and disposing offrubbish in cement or cement lime mortar complete all as specified and directed.

M&L for RCC M-25 (Design Mix) as in foundation, incl raft, footings foundation beams, plinth beam, based for columns etc using 20mm graded stone aggregates complete all as specified & directed.

M&L for RCC M-25 (Design Mix) as in columns etc using 20mm graded stone aggregates complete all as specified & directed.

M&L for RCC M-25 (Design Mix) as in beams, Cantilevers, bressummers, lintels over 1.50m span using 20mm graded stone aggregates compete all as specified & directed.

Form work to sides of concrete surface rough finished flat in foundations, footings, sides and sofits (if any) of foundations & plinths beaams and similar wk etc complete all as specified and directed.

Form work to side of concrete surface rough finished square, rectangular or polygonal as in columns, pillars, post, struts, and similar work complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, coping, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wided for fair finished surfaces.

M&L for 15 to 20 mm thick Granite (of any type) tiles machine cut not less than 0.38 sqm each tiles, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone inculding grinding and polishing comple and including 15 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade/ colour/ matrix of the tiles.

Excavation in trenches in soil n.exc 1.5 m and n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete. complete all as specified and directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n. exc 50mm and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, incuding cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9 mm dia or securing with clips complete all as specified and directed.

---ditto---, but 5mm dia and over upto 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Dismantling structural steel work in cluding doors, gate, grills etc but excluding framed trusses etc complete all as specified and directed.

S&F in repairs framed work such as grills, grating, steel ladders, iron gate and doors hung as gates including pintle hinges, stops hand made sliding bolt, handles etc complete all as specified and directed.

M&L for preparation of new steel surfaaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down and re-fixing in the same opening including edging, rising or lowering and erecting in true position of framed work such as grills, grating, iron gate and doors hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying one coats synthetic enamel paint complete all as specified and directed.

Shree Ganpati Enterprises (BID ID -3347574)

SHALIMAR INTERIORS (BID ID -3352883)

Commercial Traders (BID ID -3359655)

M/s Vijay Enterprises (BID ID -3352050)