IMPROVEMENT OF ELECTRICAL SUPPLY INSTALLATIONS BY REPLACING OF UNSERVICEABLE CABLE , LIGHT FITTINGS EARTHING AND REPAIR/REPLACEMENT OF STREET LIGHTS TIMER PANELS, TREE TRIMMING, RESTRINGING OF OVERHEAD LINES AND CONNECTED WORKS AT VARIOUS LOCATIONS A

Amount

Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for straight through heat shinkble joint with jointing material and accessories suitable for aluminum conductor cable of size 95 sqmm, 3.5 Core complete all as specified and directed.

Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for straight through heat shinkble joint with jointing material and accessories suitable for aluminum conductor cable of size 50to 70 sqmm, 3.5 Core complete all as specified and directed.

Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for straight through heat shinkble joint with jointing material and accessories suitable for aluminum conductor cable of size25 to 35 sqmm, 3.5 Core complete all as specified and directed.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area laid in trenches / duct or fixed to wall / passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminum conductor of following sizes complete all as specified and directed :- Note: Excavation, earth work, sand cushioning and cable protection items etc shall be measured and paid under respective items of BOQ.

4 core X 10 Sqmm

4 Core X 16 Sqmm

4 Core X 25 Sqmm

3.5 Core X 35 Sqmm

3.5 Core X 50 Sqmm

3.5 Core X 95 Sqmm

M & L for testing earthing of installations, buildings, equipment etc and treating of earthings by pouring salt water and submit results sheet to AGE E/M No-I complete all as specified and directed. Note: Contractor has to arrange necessary tools required for the job

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/Steel pole, laying of cable in trenches etc and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L filling approved river sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 8 cm thick before laying the cable and 15 cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note :- Thickness of sand cushion after punning down shall be measured for payment.

M&L brick protection with common burnt brick sub class ‘B’ of size 230x115x75mm for cable protection complete all as directed by Engr-in-charge.

M&L, Cleaning the steel tubular poles of 9/11 metres long of any description thoroughly with necessary cleaning agent including scrapping up of old corroded paint dirt/dust/rust carefully and applying two coats of aluminum paint over a coat of red oxide primer and writing of MES No on pole with emulsion black paint complete all as specified and directed.

M&L, Stickering of any type of street light pole with A1 graded radium strip of 100mm width three colour red, Yellow and green around the pole with 100mm gap in each strip at a distrance of 1.1 metre high from the ground level complete including white wash to the coping and marking of pole numbers with emulsion black paint complete all as directed by Engineer-in-Charge.

M&L Pipe bracket for street light fitting made out of 40mm dia GI pipe, medium grade, tubing bend to shape, 1.5m long fixed to pole wall including provn of two sets of clamps made out of flat iron of size 40x6 mm including of provn of bolts, nuts and washers complete all as specified and directed.

S&F in repairs surge protection of 10 KV suitable upto 100W LED light fittings suitable to operate on input voltage 440 AC, 50 Hz, complete all as specified and directed. Make: C&S / Havells/ Cromption cat part No 5RPSQ10KV/5KV-440 as approved by GE.

Supply & lay Galvanised Iron tubing 40mm bore, light grade in protection of cable at road crossing/hard standing/pole protection fixed with MS clamps of size 40 X 4 mm, nut bolts and washer as per site requirement including taking down old unserviceable pipes complete all as specified and directed.

All as per item No 16 above but GI tubing 50 mm bore.

M&L cutting of road/hard standing upto a size not exceeding 20 cm in width and not exceeding 60 cm in depth for laying of LT UG cable/protection pipe line making good the disturbed portion so as to match existing finishing with PCC 1:2:4 type B1/cement mortar in CM (1:2) complete all as specified and directed

Taking down old unsv Street light fittings in any position of any capacity, Repair of street light fittings by replacement of unsv spares and re-fixing the same in existing location. Note:- Spares for repair of street light fittings will be measured and paid under respective items.

Supply & fix, 90W LED street light with high quality integrated LED Luminaire with a system lumen of 11000 and system wattage 90w with an efficiency 120lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be separate optical and control gear compartment & bottom opening for easy maintenance and of of high quality pressure die cast aluminum with PF > 0.95 and THD < 10% & Operating temperature: -10°C to + 50°C. Input voltage of 100-300V. Lifetime of 50K hours @L70. Product should be suitable for continuous operation (16-18 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 07. The luminaire should have Integrated peanut optics to provide a high quality glare free lighting system. The Driver should be potted & should be a BIS approved driver and not a printed circuit board without casing, mounted inside the luminaire with Phase to Phase protection Over Voltage protection, Surge Voltage protection upto 10 kV & other safety test as per IS 15885 Part-2/Sec 13 . The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. BIS approval for Both Driver and the luminaire needs to be submitted for records before claiming RAR complete all as specified and as directed by Eng-in-charge . LUMINAIRE MAKE : Havells: ENDURASUNDOWNSL90WLED765PASYBOTG Or Equivalent in Philips or Wipro. LED MAKE Lumileds / Cree /Osram/ Bridgelux / Seoul.

Supply & fix, LED floodlight 150W system lumens 18000lm, luminaire with pressure die cast aluminium (ADC12) housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5700K, IP 66 optical and electrical compartment i.e. Built-in potted driver & impact resistance of complete luminaire > IK07. Power Factor >0.95 with mains, Surge Protection- Min 10KV along with Over voltage/ Overload, short circuit/ miss-wiring protection with other safety test as per IS 15885 Part-2/Sec 13. Universal Voltage driver to operate wide voltage range from 100 V to 270V, 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB . LED Light fixture with 150W System Power consumption. LED Efficiency> 120m/w, nominal CRI >70. Luminaire manufacturer should have in- house facility accredited by NABL certified agency & Design & Development facility certified by ISO 9001:2008. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. BIS approval for Both Driver and the luminaire needs to be submitted for records before claiming RAR complete all as specified and as directed by Eng-in-charge . LUMINAIRE MAKE : Havells: JETLEGANZAFL150WLED730P60DTOTG Or Equivalent in Philips or Wipro. LED MAKE Lumileds / Cree /Osram/ Bridgelux / Seoul.

Supply & Fix, 25W LED Decorative Postop, Aesthetically designed LED post Top with aluminium enclosure and die casted heat sink exhibits classic look with symmetrical light distribution and excellent heat dissipation for long life. Family of post top, lantern designed to complement the geometry of the area Die-cast aluminum spigot for mounting LED driver and spun aluminum canopy which is painted white inside. Opening seperate driver compartment with IP65 protection and impact resistance of IK07.Operating temperature: -10°C to + 50°C, Operating voltage range: 140-270V, Average life L70B50: 50000 hours, High efficiency long life LED module with SMD , LED package mounted on MCPCB. Lumen, efficacy of LED >140 lm/W, Powered by built-in potted LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 415V AC), Over, Voltage protection, Surge Voltage protection upto, 4 kv with SPD & other safety test as per IS 15885 Part-2/Sec 13. THD< 10%, PF>.95, Current= 0.120A, CCT 5700K Havells Cat Ref: RUBYPT25WLED830PSYMTOPC Or Equivalent / Philips Wipro. LED MAKE Lumileds / Cree /Osram/ Bridgelux / Seoul.

Supply and fix in repaire,LED BOLLARD light fitting 8W with aesthetic, innovative design and uniform lit diffuser at the upper portion acts as beacon in a landscape enviroment with robust IP65 rating complete all as specified and as directed by Eng-in-charge. MAKE-Havells Cat no-CONENXGBLS8WLEDPSYM830TOPC or technically equivalent in plilips/wipro.

Supply and fix cable junction box thermoplastic body IP 66 , size 210mmx140mmx115mm suitable for helogen free and weather proof for out door installation with metric knockout for cable entry suitable for cable size 10-16 sqmm including clamp, lugs,cable terminal & 6-10 amps MCB complete all as specified and directed.

Supply and fixing Copper Strip 20 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground to interconnect the earth pit to equipment room Note: (a) Copper sockets and connector bolts nuts washers and drilling holes shall deemed to be included in the unit rate quoteed. (b) Excavation and earth work where ever required shall be carried out in this item only (c) On testing after completion of earthing earth restiance shall be less than 1 Ohm complete all as specified and directed by Engr -in - charge

S&F in repairs, Earth continuity conductor with 25x4 GI strip fixed to wall on batten or recess or chases with necessary porcelain insulators or buried in ground or drawn in conduit/pipe/wall or fixed to poles or any other indicated situation for loop earthing etc., complete all as specified and as directed.

M&L in repairs, Earthing complete with copper earth plate electrode of size 600 x 600 x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to copper strip 20x3mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge.

Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 25mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II. 2. Copper earth strip beyond 7.5m will be measured and paid separately.

M&L in repairs, Earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI strip 25x4mm as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion complete all as specified and directed by Eng-in-charge. Note 1: The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, 50mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl Page No. 422 of SSR Part-II. 2. GI earth Strip beyond 7.5m will be measured and paid separately.

STREET LIGHT : - Taking down street light fittings of any watt ( tube light / HPSV fittings) existing position on pole/ wall/ tower complete all as specified and as directed

Taking down old unserviceable post top lantern/bollard / Garden/ Gate light fitting of any watt and type from existing position complete for repair and replacement all as specified and as directed

Supply and fixing post top lantern LED type 25/30/35 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. complete all as specified and directed by Engr -in-charge. Make: (Havells Cat Part No. RUBYPT25WLED757SSYMTOPC or equivalent in Crompton/ Luker/HPL/Surya

Supply fixing connecting and testing decorative LED Bollard light with opal diffuser & aluminium reflector of 8/9/11watt 3 Feet LED including nut, bolts, washers, clamps etc complete all as specified and directed by Engr -in-charge.Make: Havells Cat Part No.BAMBOOBL8WLED857SSYMTOPCM or equivalent in HPL/Surya/ Luker /Crompton

Supply & fix 200 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make :- Havells Cat Part No PRLMGPGENXSL200WLED757PATPCHEEWTX or equivalent in Philips/Wipro

Supply & fix 150 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make :- Havells Cat Part No ENDURAPEARLPLUSSL150WLED757PASYTOPCLC or equivalent in Philips/Wipro

Supply & fix 120 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make :- Havells Cat Part No ENDURASUNBEAMSL120WLED730SASYTOPC or equivalent in Philips/Wipro

Supply & fix 90 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make :- Havells Cat Part No ENDURASUNBEAMSL90WLED757SASYTOPC or equivalent in Philips/Wipro

Supply & fix 70 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source etc complete all as specified and directed. Make :- Havells Cat Part No ENDURASUNBEAMSL70WLED757SASYTOPC or equivalent in Philips/Wipro

Supply & fix 60 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source etc complete all as specified and directed . Make :- Havells Cat Part No ENDURASUNBEAMSL60WLED757SASYTOPC or equivalent in Philips/Wipro

Supply & fix 45 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make :- Crompton Cat Part No ENDURASUNBEAMSL45WLED757SASYBOPC or equivalent in Philips/wipro

Supply & fix 50 watts LED flood light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make : Havells Cat Part No JETAADORNFLS050WLED757PR1SYMTOTG or equivalent in Philips/Wipro

Supply & fix 120 watts LED flood light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make : Crompton Cat Part No JETAADORNNXTFLS120WLED757P60DTOTG or equivalent in Philips/Wipro

Supply & fix 200 watts LED flood light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc complete all as specified and directed. Make : Crompton Cat Part No JETAADORNNXTFLS200WLED757P60DTOTG or equivalent in Bajaj/Surya

S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed.Make: Hensel/Syntex/C&S/neptune

M&L cross arm bracing supports, clamp and back plate from structural steel section including nuts & bolts washer, welding, bending, cold or hot drilling holes for bolts in any shape or size as indicated or as directed and including of one coat primer, one under coat and one finishing coat of aluminium paint for making clamp to be used for fixing of flood light /street light on pole including taking down old unserviceable.

Supply and fixing lantern of dia 60 CM for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole , made of MS pipe medium grade dia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nos including two coat of aluminium painting over a coat of redoxide primer including taking down old unserviceable complete all as directed

S&F in repairs Electronic drivers suitable for 60/72 W LED fittings suitable to operate on input voltage of AC 100-265 V, 50 Hz including taking down and refixing after repairs complete all as specified and directed.

S&F in repairs Electronic drivers suitable for 90 W LED fittings suitable to operate on input voltage of AC 100-265 V, 50 Hz output DC 36V, max 350 MA, 0.95 PF, including taking down and refixing after repairs complete all as specified and directed.

Supply and lay PVC Insulated , PVC sheathed industrial HV round multicore flexible cable with copper conductor 3 core 1.5 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings in replacement of old unserviceable .

Supply and replace GI pipe fixed on the top of gate piller by 50 mm dia medium grade GI pipe of length 30 cm( 20 CM inside the piller and 10cm above the piller including necessary cement work and making hole on GI pipe if required complete all as directed. Note: Quoted rate inclusive of making good of disturbed suface including necessary painting to match with the adjoining surface.

M & L in replacement of old unserviceable earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth strip 32 x 6mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note :- Item of earthing includes cost of 7.5m long galvanised iron earth strip of 32 x 6mm size and protection pipe of 40mm bore GI medium grade.

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of light complete all as specified and directed Make KEI/FINCAB/PLAZA

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 6.0 Sqmm for connection of light complete all as specified and directed Make KEI/FINCAB/PLAZA

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 10.0 Sqmm for connection of light complete all as specified and directed Make KEI/FINCAB/PLAZA

Supply and lay PVC Insulated , PVC sheathed industrial HV round multicore flexible cable with copper conductor 2 core 2.5 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings .Note : Used for garden light connection, excavation, retuning filling etc will be measured and paid separately.

Supply and lay PVC Insulated , PVC sheathed industrial HV round multicore flexible cable with copper conductor 3 core 1.5 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings .Note : Used for garden light connection, excavation, retuning filling etc will be measured and paid separately.

Supply and fixing lantren of dia 60 CM for fixing of flood light, cap type to be fixed on the top of 9 m SP-31 Steel pole , made of MS pip medium grade dia greater than the top dia of the pole of length 0.35 M supported by MS flat iron of size 50X6 mm 8 nos including two coat of aliminium painting over a coat of redoxide primer complete all as directed

Dismantling LT steel tubular pole of any height by taking out from PCC foundation complete and shifting to other location as directed including fixing the pole in true vertical position including excavation and earth work, PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as base concrete and PCC 1:3:6 type C2 (using 20mm graded stone aggregate) in both foundation and coping of poles all as specified in SSR Part I-2009 and applying two coats of aluminium paint to pole surface complete all as directed by Engineer-in-Charge.

M&L for Making hole 2 nos ( one hole near JB another hole near bottom portion of bracket) on existing steel tubuler pole ( SP -31 ) of suitable size for passing of Street light connection HV Round cable 3 core 1.5 / 2.5 Sqmm from Junction Box to street light complete all as directed

Partially Demolition of coping of pole as required for placing of cable protection pipe and making good the same by using PCC and rendering complete al as speccified and directed.Note: Quoted rates deemed to be inclusive of PCC and rendering.

S & F LED out door Projection Fancy Down/Dim light fittings 1x9 watts ,230 volts, with LEDs including driver 1x9 Watts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge.

S & F LED Flexion LED Digital RGB Strip IP-40 colour out door coordinated 5mtr RGB Strip with light traval function comes with IR Remote for false ceiling/POP Conf hall/Bar decarative surface 230 volts, with all suitable driver of same wattage accessories and connecting up with and including twin core twisted flexible copper conductor plug &cable of suitable size complete all as specified and directed by Engineer-In Charge.

Sri Balaji Enterprises (BID ID -3120764)

SRI SAI RAM ENTERPRISES (BID ID -3120785)

SUN LIGHT HOUSE (BID ID -3122301)

Mavee Syndicate (BID ID -3110394)

Srinivash Engineers (BID ID -3107593)

L and S ENTERPRISES (BID ID -3118104)

M/s. A&T Enterprises (BID ID -3122415)

MS ENTERPRISES (BID ID -3119970)

BHATNAGAR ASSOCIATES (BID ID -3110233)