Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹16.9 L
Closing Date
22 Jan 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Krishnareddy G T
Upgradation of 33/11 kV sub-station to 2X10 MVA, 110/11 kV sub-station at Khanagaon,Construction of 110 kV Terminal Bay at 110 kV Mamadapura Substation, Construction of 110 kV SC line on DC towers using Lynx conductor from 110kV Mamadapura sub-station to proposed 110kV sub-station at Khanagaon for a distance of 15.188 km in Gokak Taluk, Belagavi District on Partial Turnkey basis including Supply of all matching Materials/ Equipments (Excluding Supply of 10MVA, 110/11kV Power Transformer & 11kV Switchgear)and Erection(Including Civil Works)of all Materials/Equipment,Testing and Commissioning
KPTCL/2023-24/SS/WORK_INDENT383
KPTCL/2023-24/SS/WORK_INDENT383
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for clause no.3.2 (b)(i) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Documentary proof for clause no.3.2 (b)(ii) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates and Auditors Reports of the last five years preceding the date of bid submission of the Bidder duly certified by chartered Accountant as in clause no.3.2 (a) of ITT
Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities)
Documentary proof for clause no.3.6 of ITT : Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years,Value of existing commitments and on-going works as well as the stipulated period of completion, remaining for each of the works should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent and self declar. as in Note of the clause 3.6 of ITT in the presc.format as in clause No: 1.5 of QI Value of existing commitments and on going works as well as the stipu. period of comp, remaining for each of the works signed by the Employer in charge Or The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be verified and certified by Chartered Accountant/ Cost Auditor. However, the Bidder has to upload the PO/Work Award copies for existing commitments and on-going works
Documentary proof for clause no.3.6 of ITT Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years, Value of existing commitments and on-going works as well as the stipulated period of completion, remaining for each of the works should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent and self declar. as in Note of the clause 3.6 of ITT in the presc.format as in clause No: 1.5 of QI A self-declaration stating that the information with regard to Assessed available tender capacity(Works on Hand) furnished are correct as per the clause no.3.6 of ITT and at clause No.1.5 of Section-3-QI
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of bid submission as per clause no.2.3 of ITT, failing which the offer is liable to be rejected
Power of Attorney in favor of all the persons signing the documents as in Annexure-XI and Letter of Undertaking as per Annexure-V of Section-4
Certificate of Incorporation of the Individual or any relevant document in respect of Partnership/Proprietorship firms as per the tender document as per clause no.3.10 (xi) of ITT
Self-declarations in respect of Litigation, dis-qualification/Black listed due to non-performance & Risk & cost, Country which shares a land border with India as specified in Annexure XVI and Annexure XVII and as per clause no. 2.3 & 2.4 (b), (c), (d) & (e) of ITT
GST registration, PAN etc., of the Tenderer as per clause no.3.10 (xii) of ITT
The Qualification and experience of key Personnel proposed for carrying out the Work and Description of the Tools & Plant available with them for execution of the Work
No Deviation Certificate as per Annexure-I of Section-4
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets
Constitution or legal status, Place of Registration(upload copy) and Principal place of business of the Bidder written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information
proposed methodology and program of construction backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per approved Activity chart as per clause No.1.13 of Section-3-Qualification Information
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https//kptcl.karnataka.gov.in, Link Tendering & Procurement application for Vendor registration etc as per Annexure -XIV of Section-4
Certificate is to be uploaded by the Tenderer agreeing to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure XVI and XVII of Section-4
The Tenderer shall upload Type test reports as per tender documents/technical specifications
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
Any other required documents as per the qualifying requirements, terms and conditions of the tender, NIT & Technical specifications
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only
₹7,500
₹16.9 L
27 Dec 2023
27 Dec 2023
23 Jan 2024
27 Dec 2023
27 Dec 2023
Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer as per Technical specifications
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete su...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators as per Technical specifications...
b) Upright mounting type without earth switch with live point height 4600 mm
B) 11kV Isolators as per Technical specifications:
(i)11 kV isolator, double break 1250 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for AAAC Moose for incomer
ii) 11KV isolators, double break 400A, 25KA capacity, with rigid bi-metallic terminal connectors suitable for Coyote ACSR for outgoing feeders and capacitor bank
iii) 11KV isolators, Single break 400A, 25KA capacity with Roaster switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per Technical specificat...
ii) 110 KV Class, 31.5 KA, CT of ratio 200-100/ 1-1-1A for Transformer.
Core 1: Vk-400V,Rct 2 Ohm at 200/1A, Accuracy Class PS-Dist/Dif
For metering: Accuracy 0.2s, Burden 1...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer: (a)Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors suitable for drake ACSR as per technical s...
Lightning Arrestor :
Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR with sur...
ii) 9 KV, 10KA with connector and clamps
Capacitor Bank : Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR, 12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable...
A.Control Panels :
Simplex Type Control and Relay Panel complete as per specifications (SCADA Compatible) (Control Voltage 110 V DC) as per Technical specifications.
a)110/11kV Transformer panel t...
b) 110 kV panel for overhead line
1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.
2) The accuracy class of meteri...
11 KV ODS and take off structure:
(i)Columns out of 9.0 Mtr long RCC pole for 300kgs working load (using TOR steel ) for 11kV ODS
ii) Supplying of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting roaster GOS/DB GOS with provision for fixing 9KV lightning arrestor...
Conductor, insulator and Hardwares:
e)Post insulators solid core 110 KV Class, 1Unit/Stack
f) 11kV,90KN Disc insulators
g) Bolted type Tension clamp to suit Drake ACSR - 90kN (110 kV Side).
h)Bolted Type Tension Clamp and hardware suitable for AAAC Moose.( on LV side of Transformer road crossing)( 11 kV Side)
i)Bolted Type Tension Clamp and hardware suitable for Coyote ACSR.( 11 kV Side)
j) Bolted type Suspension clamp to suit Drake ACSR - 90KN (110kV side)
k)Bolted type Suspension clamp to suit AAAC Moose.( on LV side of Transformer)( 11 kV).
l)C Type Wedge Connector suitable for Drake - Drake
m) C Type Wedge Connector suitable for AAAC MOOSE-AAAC MOOSE
n)C Type Wedge Connector suitable for Lynx - Drake
o)C Type Wedge Connector suitable for Coyote-Coyote
p)C Type Wedge Connector suitable for AAAC MOOSE-Coyote
q)Post insulator clamp suitable for Single Drake ACSR and 110kV Solid Core Insulator.
Auxiliary Transformer:
(i)Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per spe...
ii) Supply of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A Double break isolators, H-Frame and 9KV, 10KA surge arrestors (3 Nos), DOLO/HG-Fuse unit, LT Distribution Box, Tri-vector...
A)LTAC panel (indoor): LTAC Panel (Indoor), 415V as per technicalspecification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O...
B) A.C. Distribution Box (Outdoor) as per Technical specifications:
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA ...
LT Power armoured UG cable as per specification.
a) 1.1 KV, 4 X 95 Sqmm Aluminium, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 25 Sqmm Copper, cable with glands/lugs/ferrules
c) 1.1 KV, 4 X 10 Sqmm Copper, cable with glands/lugs/ferrules
Station Battery:
i)110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
ii)Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specif...
iii)DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc....
Copper Control Cables :
1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications.
i) 19 C x 2.5 Sqmm
ii)4C x 6.0 Sqmm
iii) 4C x 2.5 Sqmm
iv)2C x 2.5 Sqmm
v)2C x 6.0 Sqmm
Equipment required for establishing SCADA Communication as per KPTCL specification
Note:1)Satellite communication required will be arranged by SLDC
2)The detailed BOM& specification of SCADA equipmen...
2) Data Concentrator Unit (DCU)
3) 2kVA online UPS (230V AC 1Phase 50Hz)
B) SCADA Integration of new bays in existing sub-station:
Note: Scope involves Supply & erection of the following:
1. Multi Functional Transducer (MFT)(1 number for one bay panel) 0.2s class
2. Opto coupler( 1 number with 8 output points for one bay panel) 220 or 110 V DC
a.Current cables-Copper core with c/s 4.0sqmm multistrand 4core
b. Voltage cables-Copper core with c/s 2.5sqmm multistrand 4 core
c. Signal cables- armoured Copper core with c/s 0.5sqmm multistrand 10 core
d. Control cables- Copper core with c/s 1.5sqmm multistrand 10 core
e. Control cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specifications.
f. Control cables- Copper core with c/s 32.0sqmm multistrand for Battery conforming to KPTCL specifications
v) RJ-45 cable for Energy meter integration to DCU
Fire fighting equipment with necessary mounting stands.
a) Foam type extinguisher (Mechanical type):
i) 50.0 litres capacity
ii) 9.0 litres capacity
b) Water type (Gas pressure type) - 9.0 litres capacity
c) Carbon dioxide type - 4.5 Kg capacity
i) G.I. Bucket 15 litres capacity
ii) Steel stands for the above to have 4 Buckets to each stand.
Maintenance Tools and Plants
1) Portable (mobile) oil pump (1/2 HP Air pump 500 to 1000 gallons).
2) Telescopic ladder Aluminium 6 Mtr. Height
3) Ring spanner set:12 Nos. per set
4) Tube spanner set:12 Nos. per set
5) Pipe wrench, 24 inch
6) Pipe wrench, 18 inch
7) Hydraulic crimping tools up to 1000 Sqmm.
8) Rubber hand gloves (15 KV tested)
9)Rechargeable 5 w LED Hand Torch
10) Hand Torch 3 cells
11) Insulated cutting plier 12 inch size
12) Insulated cutting plier 8 inch size
13) Line live tester, AC / DC 500V
14) Screw driver 18 inch
15) Screw driver 12 inch
16) Hammer 8 lbs.
17) Hammer 2 lbs.
18) Chain pulley block, 5 ton
19) Hydraulic jack, 5 ton capacity
20) Pipe derrick, suitable for lifting 3MT & lift of 6Mtrs height.
22) Box spanners:12 nos. per set with handle
23) Transil oil dielectric breakdown test kit
(with 2.5mm gap, 0-60KV) Tester.
24) Insulation Tester Digital type (megger), 2.5 to 5 KV
25) Insulation Tester (megger), 500V, Hand operated
26) SF6 Gas leak detector
27) Multimeter, Electromechnanical type
28) Multimeter, Electronic type
30) D.C. Voltmeter, range -5V to +5V
31) Hydrometer syringe suitable for vent holes
32) Specific gravity correction chart
33) Thermometer with wall mounting holder
34) Rubber apron
36) Protective goggle
37) Acid resisting jars (4 pint capacity)
38) Rubber shoes knee height
39) Glass Funnel
40) Grounding sticks extendable upto 18ft:3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)
41)Wall Mounting type holder for hydrometer
Furniture for Control Room Staff and Maintenance Staff :
1) Steel Almirahs 6 1/2 feet
2) Steel Almirahs 6 1/2 feet with glass panel doors
3) Officer s Tables
4) Steel Slotted Angle rack (big size)
5) Steel Slotted Angle rack (small size)
6) Steel Dust bins
7) Executive revolving chairs
8) S Type arm chairs
9) Steel folding chairs
Miscellaneous items like rubber mats, first aid box, danger board, shock treatment charts, water filter door locks, fixograph, Sub station name board and other sundry items (size/capacities to be got ...
ii)First aid box
3.Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).
5. Sub-station name board duly painted as per specification including erection & Civil Works
6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.
7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)
8. Danger board (prohibited) with support structure including fixing in front of the gate
9. Equipments name plates and earthing name plates including fixing at outdoor yard for 110kV Khangaon S/s and required for TB work at 110kV Mamadapura S/s
Station yard lighting (outdoor):
Design and supply of Station Yard illumination in Confirmity with the illumination levels mentioned in the Technical Specification of Station Yard illumination materia...
Station Erection
Station Erection including Testing and Commissioning:
Power Transformer :
10 MVA, 110/11 KV, Delta/Star, Dyn11, 3-Phase, 50 Hz, Core type winding with OLTC, RTCC Panel, etc., complete filled with Tran...
Circuit Breaker :
SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete su...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators:
A) 110KV, 1250A, 40KA Class Do...
B) 11kV Isolators
(i)11 kV isolator, double break 1250 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for AAAC Moose for incomer
ii) 11KV isolators, double break 400A, 25KA capacity, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.for outgoing feeders and capacitor bank
iii) 11KV isolators, Single break 400A, 25KA capacity with Roaster switch, with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.
i) 110 KV Class, 31.5 KA,...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer: (a)Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors suitable for drake ACSR as per technical s...
Lightning Arrestor :
Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.
ii) 9 KV, 10KA with connector and clamps
A.Control Panels :
Simplex Type Control and Relay Panel complete as per specifications (SCADA Compatible) (Control Voltage 110 V DC).
a)110/11kV Transformer panel type-2 Nos.
b)110 kV panel for ov...
Erection of of Station structures & Mounting Structures including Bolts & nuts
C) 11 KV ODS and take off structure:
(i)Columns out of 9.0 Mtr long RCC pole for 300kgs working load (using TOR steel ) for 11kV ODS
ii) Erection of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting roaster GOS/DB GOS with provision for fixing 9KV lightning arrestors...
BUS BAR FORMATION:
Main bus/cross bus (all the three phases in a segment) using conductors with fixing of insulator spacers, levelling of string conductors to the required height above the equipment,...
bFormation of Main/Cross bus with single Coyote
c)Faraday cage formation as per specification for 110 kV Unit. No. should be read as Bay
(i)Post insulators solid core 110 KV Class, 1Unit/Stack
ii)Post insulators solid core 110 KV Class, Releasing and reerection
Auxiliary Transformer:
Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per specif...
ii)Erection of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A Double break isolators, H-Frame and 9KV,10KA surge arrestors (3 Nos), DOLO/HG-Fuse unit, LT Distribution Box, Tri-vector...
A)LTAC panel (indoor): LTAC Panel (Indoor), 415V as per technicalspecification comprising of voltmeter and ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O...
B) A.C. Distribution Box (Outdoor) :
AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A...
Laying of LT Power armoured UG cable Aluminium and Copper and 1.1kV PVC insulated Copper Control Cables(Refer Section 11a for splitup details)
i)Station Battery:
110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
ii)Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specif...
iii)DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc....
11kV Switchgear:
11 kV, 350 MVA, Porcelain clad VCB switchgear (1250 A for incomer & 800A for feeders) outdoor type, each comprising of 2I/C+12F+2CB+1AP (remote announciation cum control panel )wit...
Equipment required for establishing SCADA Communication as per KPTCL specification
Note:1)Satellite communication required will be arranged by SLDC
2)The detailed BOM& specification of SCADA equipmen...
2) Site survey, wiring, installation,testing and commissioning of DCU (DCU installation to be done in RTU panel)
3) Wiring, Installation, Testing &
Commissioning of UPS with
batteries & cables,
4)Integration of RTU,DCU and UPS with field equipments
B) SCADA Integration of new bays in existing sub-station:
1. Fixing & wiring of MFT
2. Fixing & wiring of Opto Coupler
Laying of Cables:
a.Current cables-Copper core with c/s 4.0sqmm multistrand 4core
b. Laying ofVoltage cables-Copper core with c/s 2.5sqmm multistrand 4 core
c. Signal cables- armoured Copper core with c/s 0.5sqmm multistrand 10 core
d. Control cables- Copper core with c/s 1.5sqmm multistrand 10 core
e. Control cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.
f. Control cables- Copper core with c/s 32.0sqmm multistrand for Battery conforming to KPTCL specifications
v) RJ-45 cable for Energy meter integration to DCU
Earth mat formation:
i)Supplying, Laying and welding of M.S.Flats 50X8 mm, applying ACB paint to welded portion as per approved drawing, specification and direction of Engineer in-charge of work. ...
ii)Supplying and Grounding of Equipment and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connecting ...
iii)Supplying and Providing 25mm dia M.S.Rod 1.05m long earthman spikes including heating, bending top 50mm overlap flattening and making spike edge at the ground level and welding the rod with ground...
iv)Supply and Erection of Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe us...
v)Supply and Erection of Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe usi...
vi)Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite tr...
b)40mm dia MS rod
c)Bentonite clay
d)Cost of GI flat for joining two rods by welding to obtain continuous length
Mandatory spares supply
Circuit Breaker (CB)
Closing coil with resistor (For one Complete Circuit Breaker)
a) for 123KV CB
Tripping coil with resistor (For one Complete Circuit Breaker)
a) for 123KV CB
Terminal Pad (For one Complete Circuit Breaker)
a) for 123KV CB
Terminal Connector (For one Complete Circuit Breaker)
a) for 123KV CB
Copper Contract fingers male & female (For one Complete Isolator)
a) for 123KV Class
Terminal Connector (For one Complete Isolator)
a) for 123KV Class
Terminal Pad (For one Complete Isolator)
a) for 123KV Class
TOTAL weight of Tower parts - Mild Steel (Line portion:145.7938t and station portion:29.466t) Refer section 11 a for split up details
Note -Rate to be quoted on per Tonne basis.
TOTAL weight of Tower parts - High tensile Steel
Note- Rate to be quoted on per Tonne basis.
Total weight of Bolts & Nuts (Line portion:11.6174t and station portion:1.8174t) Refer section 11 a for split up details
Note- Rate to be quoted on per Tonne basis.
Tower Accessories as per Technical Specifications. :
a) Number Plates
b)Danger Boards
c) Circuit Plates
d) Phase Plates (Set of 3 Nos.)
e) Earth Bonds i) 300mm long
f) Supply Portion of Grounding of towers including cost of 40 mm dia 2.5 mm thick,class C G.I. Pipe of 3 metres length as per specification with50 X 6 mm GI Flats 3 metre long, salt, charcoal
Conductor and Ground Wire:
ii.7/3.15mm Ground wire(Line portion:15.4158km and station portion:0.250km) Refer section 11 a for split up details
Insulator strings as per Technical Specifications. :
A. Tension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X8nos. of 90kN Disc insulators
B. Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X7nos. of 90kN Disc insulators
b. Porcelain long rod insulator string equivalent to 1X7no...
C. Suspension insulator strings consisting of any one of the following:
a. Insulator string consisting of 1X14nos. of 120kN Disc insulators
b. Porcelain long rod insulator string equivalent to 1X1...
Insulator hardwares suitable for Lynx ACSR for Transmission Lines as per Technical Specifications. :
1.Single Tension Clamps with arcing horn
2.Double Tension Clamps with arcing horn
3.Single Suspension Clamps with arcing horn
4.Double Suspension Clamps with arcing horn
Insulator hardwares suitable for Drake ACSR for Transmission Lines as per Technical Specifications. :
Double Suspension Clamps with arcing horn
Accessories for ACSR Lynx conductor as per Technical Specifications. :
a) Mid Span Compression Joint
b) Preformed armour rod
c) Repair sleeves
e) Vibration dampers
Hardware & Accessories for Ground Wire as per Technical Specifications:
a) Mid Span Compression joint
b) Repair sleeves
d) Single Tension clamps
e) Single Suspension clamps
Line Erection Portion including Dismantling:
Check survey and tower spotting:
Note: As per UNISR-2023 Volume-VI and Tender Conditions.
Erection of Transmission Line Lattice type Towers (including tower accessories,etc., except GI angle with Barbed wire & earthing) as per Technical Specifications.
The Bidders are required to q...
Tower Accessories as per Technical Specifications.
a)Supplying and fixing GI angle 45 x 45 mm 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner ...
b)Supply and fixing of barbed wire
c) Erection portion of Grounding of towers including 40 mm dia 2.5 mm thick,class C G.I. Pipe of 3 metreslength as per specification with50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including excav...
Installing insulator strings complete with necessary Hardwares, including fixing of their accessories, etc., as per Technical Specifications.
i)Lynx ACSR conductor
ii)7/3.15mm Ground Conductor
Releasing and restringing of Lynx Conductor as per Technical Specifications(110kV)
Releasing and restringing of Drake Conductor as per Technical Specifications (220kV)
Releasing and restringing of Ground Conductor as per Technical Specifications(110kV & 220kV)
Dismantling of existing super structure/tower materials
NOTE:a)Payment will be made only for the actual weight of equipments/structures/ towers/conductor length/earth wire length which are dismantle...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing aluminium tubular handle bar 32 mm outer dia,3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.: Polyester powder coated minimum thic...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing sliding window lock, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work sit...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g
Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing and fixing ladder for easy maintenance of Sump tank of Rain water Harvesting
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Control Panel BOARD-A:
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
GALVANISED MILD STEEL TUBES:
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Ercerion of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Prime Coat over WMM/WBM: Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...
Dense Graded Bituminous Macadam Grading - I for traffic less than20 MSA
Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified gra...
Tack coat on Granular surface treated with primer:Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3 Way Socket
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and virgi...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends/ End-caps of same materials in exisiting trench as per IS 14930 part -II ...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 sqmm Long Barrel
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 150 sqmm Long Barrel
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. Copper wire. c) 8 SWG
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.
Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT)
Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired
Supplying, fixing and wiring rotary selector switch suitable for Ammeter.
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer class 0.5 accurecy with Tape Wound
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps
SSupply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...
Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...
Supply of round/square recess/surface mounted rolling type LED Down light withLED square or round down light 5-6W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewire...
Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...
Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.
Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Pre-Bid Proceedings.pdf
Tender Document • 0.67 MB
Circulars and Guidelines.zip
Tender Document • 2.07 MB
Upload1 383.zip
Tender Document • 23.97 MB
Upload2 383.zip
Tender Document • 2.60 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .