Repair and Maintenance of HPPWD Executive Engineer residence at Barsar

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws , wooden plugs and PVC sleeves etc., wherever necessary complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (ninteen millimeter) thick Commercial Board water proof shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete) upto floor all level as per HP. PWD. specifications of 1990 (one thousand nine hundred ninty)volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (nineteen millimetre) thick water prood commercial board ISI Marked is No 1659 of (UNIPLY / GREEN Ply or its equivalent) in shelves / box for cup board with butt joint and fixing with nails and screw etc. complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00 mm(one millimeter) thick coloured or plain lamination sheet (Sunmica) on boards / ply wood sheets with approved adhesive and nails etc. complete as per direction of Engineer-in- Charge. including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 300mm (three hundred twenty five millimetre) bright fiished brass handles with necessary screws etc. complete as per direction of Engineer-in- Charge. including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200mm (two hundred twenty five millimetre) bright fiished brass handles with necessary screws etc. complete as per direction of Engineer-in- Charge. including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel cabinet legs & supports for Almirah 150mm ( one hundred fifty mili meter) etc complete.including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing kitchen Tendom etc. complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing PVC rigid foam sheet 1 mm (one millimetre) thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT shelf 440 mm (four hundred fourty millimetre) long, 124 mm (one hundred twenty four millimetre) width and 36 mm (thirty six millimetre) height of approved quality and colour, weighing not less than 300 gms (three grams) as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 110mm (One Hundred ten milimetre) dia ISI marked high pressure PVC spigot and socket waste and ventilating pipes including fixing with approved adhesive etc. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred fifty millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Structural steel work of (TATA,SAIL or RASHTRIYA ISPAT) riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in trusses and trussed purlin in building i.e rafter purlin in main truss and dormer etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) (three hundred into three hundred into ten millimeter) in grey/coloured or of approved Nitco /Kajaria / Simpolo /Johnson / Somany shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying kajaria/ Nitco make white glazed tiles 6 mm (six millimeter) thick size 30x45cm (thirty into fourty centimetre) in flooring, treads of steps and landing laid on a bed of 12 mm(twelve millimeter ) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry, finishing with flush pointed in white cement including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero point sixty millimeter) thick prepainted steel sheet in roofing of Tata / Sail / Reliance / Jindals with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNV) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals. The recovery for prepainted steel sheet,whether useful or not, for 44.30 (fourty four point three zero) in all cases,@ rupees 150/- only (Rupees one hundred fifty only) per square meter . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.60mm (zero point sixty millimeter)thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia (six millimeter diameter) & prepainted G.I.(galvanized Iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 1.66mm to 20mm (one point sixty six milimetre to twenty milimetre)) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete and as per drawings and technical specifications (Base members of steel work shall be measured & paid separtely) including entire carriage of material within all leads and lifts other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax , GST or other taxes imposed by the Government .

Providing and fixing 15 mm(fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix 1:6(one cement six coarse sand) and as per drawings and technical specifications and as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer and as per drawings and technical specifications including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero meter) filled with brickbats including S.W. drain pipe 100mm (one hundred millimeter) diameter and 1.20 m (one point two zero meter) long complete as per standard design including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Constructing brick masonry road gully chamber 50x45x60 cm (fifty into fourty five into sixty centimetre ) with bricks in cement mortar 1:4 (one cement : four coarse sand) including 500x450 mm (five hundred into four hundred fifty millimeter) pre-cast R.C.C. horizontal grating with frame complete as per standard design he rates given for all the items under sub With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 aincluding entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (one point five meter) in width or 10 sqm on plan), (one point five metre in width or ten square metre)including dressing of sides and ramming of bottoms, lift upto 1.5 m,(one point five metre) including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (fifty metre)The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 (fifty) metres nominal concrete 1:3:6 ( one cement : three coarse sand : six graded stone aggregateor richer mix (i/c equivalent design mix)lead as per direction of Engineer - in - charge as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size). including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.