RequiredExperience with Government
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No Mobile Toilet ( 2 pieces ) ( Under PAC ) Make mapple Model mobiletoilet6seater Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Mode of Supply Assembled Ready To Use Assembled Ready To Use Number of Compartments 6-seater mobile toilet 6-seater mobile toilet 1/7 Type of WC Indian with FRP Indian with FRP Number of WC 6 6 Number of Bathrooms 0 0 Number of Urinals 0 0 Water facility By mean of overhead tank(Capacity 1000Ltrs) By mean of overhead tank(Capacity 1000Ltrs) Wash basin 2 Nos. outside the Unit with common facility 2 Nos. outside the Unit with common facility Sewage facility Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) Sludge tank (capacity-600ltrs) with 100mm outlet facility through butterfly valve and hose pipe(For 6-seater) ventilation Two No. Two No. Top(roof) shape Slanting/tapper * Projection of Roof 100mm projection from front and 50mm projection on other sides(slanting shape) 100mm projection from front and 50mm projection on other sides(slanting shape) Installation and commissioning To be done by seller To be done by seller Plumbing and Sanitation fitting connections To be done by seller To be done by seller Electrical connections To be done by seller To be done by seller Waste extraction fitting To be done by seller To be done by seller Civil foundation No foundation required No foundation required TRAILER STRUCTURAL MATERIAL Trailer frame(Chassis) material with support material including pathway 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater 100mm X 50mm C- channel MS - 75mm X 37.5mm C-channel MS - 40mm X 40mm X 5mm (thick) MS angle - 40mm X 40mm X 5mm (thick) MS Tee - 35mm X 35mm X 5mm (thick) MS angle and 25mm X 25mm X 3mm (thick) MS angle for 4-seater/6 -seater/8-seater and 10-seater Railing material 38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required38mm X 25mm MS pipe of thickness 1.2-1.5mm (for 4-seater
Required6-seater
Required2/7 8-seater & 10-seater) 8-seater & 10-seater) Trailer understructure Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Spring leaves 710mm with 9 leaves for 4-seater and 6-seater Turn table/rotor 100mm X 50mm MS channel and 10mm thick MS plate plus spring ply 40mm X 5mm * Pathway passage/slide platform Aluminum chequerd sheet having width of 455mm * Stairs frame material 35mm x 35mm X 5mm MS angle and 25mm x 25mm x 3mm MS angle with 25mm x 3mm MS Flat * Stairs size 710mm X 230mm having 4-step for 1420mm Height and 735mm width stair * Locking Locking pins to be provided for lock the platform * Tow bar Made of 100 X 50 mm channel section with easy detachable and connect with turn table Made of 100 X 50 mm channel section with easy detachable and connect with turn table FRAME MATERIAL Side panel frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) 35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle (for 4-seater 6-seater/8-seater & 10-seater) Top(roof) frame material 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle 40mm X 40mm X 5mm(thick)
Required35mm X 35mm X 5mm(thick)
Required25mm X 25mm X 3mm(thick) MS angle Top(roof) support frame structure 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat 40mm X 5mm(thick)
Required35mm X 5mm(thick)
Required25mm X 3mm(thick) MS flat Partition frame material 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle 35mm X 35mm X 5mm(thick)
Required25mm X 25 mm X 3mm(thick) MS angle Ventilation frame material 25mm X 25mm X 3mm(thick) flat MS * 3/7 Door frame material 50mm X 25mm of 14-16gauge rectangular MS hollow pipe 50mm X 25mm of 14-16gauge rectangular MS hollow pipe Support material for Door panel fixing No support material No support material Door hinges(two numbers) 75mm size with 0.6-0.8mm thickness SS * Tank holder frame material 25mm X 3mm (thick) MS flat 25mm X 3mm (thick) MS flat PANEL MATERIAL Side panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Top(Roof) panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40-70mm thick taper roof EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Door panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated with necessary stiffeners (steel sheet thickness 0.6mm 275MPA) partition panel material Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Zero spangled cold rolled 120 GSM galvanised(galvano) powder coated 40mm thick EPS panel(EPS Density-16Kg/CuM EPS thickness-38mm and steel sheet thickness 0.6mm 275MPA) Floor material 5mm thick FRP material 5mm thick FRP material DIMENSION Size of each cubical(LXWXH) ± 25mm 915mm X 915mm x 1980mm 915mm X 915mm x 1980mm Door size(WxH) ± 585mm x 1830mm * 4/7 20mm Ventilation size(WXH) ± 10mm 650mm X 40mm * Partition height ± 20mm 1830mm * Single pan size ± 10mm 580mm X 440mm with built in platform/footrest * Overall Length(mm) ± 25mm 3955mm for 6-seater 3955mm for 6-seater Overall Width including pathway(mm) ± 25mm 2438mm for 4 and 6 seater 2438mm for 4 and 6 seater Total height ± 25mm 3200mm * SEWAGE SUCTION UNIT Capacity of sewage suction unit N.A * Length of sewage suction unit ± 25mm N.A * Width of sewage suction unit ± 15mm N.A * Capsule Diameter N.A * Capsule Thickness N.A * Chassis size of sewage suction unit N.A * Suction pump N.A * Valve for sewage suction unit N.A * Axle for sewage suction unit N.A * Tyres for sewage suction unit N.A * Spring leaves for sewage suction unit N.A * MISC Door locking bolts Size 100mm of MS * Tower bolt locking Tower bolt of MS size 75mm * Overhead Tank material made of PVC * Wash basin material made of FRP(fiber reinforced plastic) * WC material made of FRP(fiber reinforced plastic) * Towel rail/ring made of SS * 5/7 Cloth hook made of aluminium * P-trap material made of PVC(75mm) * Footrest(WC) material made of FRP integrated with Indian WC and floor made of FRP integrated with Indian WC and floor Sewage tank material Sludge tank made of FRP 4mm(for 4-seater/6 -seater/8-seater & 10-seater) * Mirror size 380mm X 255mm 380mm X 255mm Electric provision By mean of connection from external supply * Sewage provision Connected to septic tank * Level indicator provision N.A * Water supply connection UPVC pipe connection with all toilet interconnecting * Seat cistern fitting By PVC flush pipe to toilet seat By PVC flush pipe to toilet seat Soap stand Aluminium made Size:125 X 75 mm * Tap material PVC push cock * Base floor surface To be suitably slanted towards WC for proper drainage(for Indian WC) * Trailer Movement facility Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Two axle of 57mm X 57mm X 2133mm with 4-tyres of size 7.50 X 16 with hubs and bearings for 8-seater and 10-seater Provision for vent pipe From sludge/Septic tank * Water mug(standard size) Plastic made * Electric point 1 No. electric point to be provided in all toilet 2 watt LED * Stand provision to keep mobile toilet in static position To keep safe Tyre
RequiredTube
Requiredrim and their maintenance * COLOUR & FINISH Colour of cabin As per buyer's choice * Finish With Primer and Paint * CERTIFICATION Test reports to be YES * 6/7 furnished to buyer's on demand OEM of offered product is ISO 9001:2015 certified YES * WARRANTY Warranty period in number of years 1 1 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
