PROVN OF BATHROOM AND TOILET BLOCK AT MT SECTION OF FAD AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R II UNDER GE PANAGARH

Amount

Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out, n.exc. 25 cm, removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose complete all as specified and directed.

M&L for sand filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:4) complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika).

M&L for Preparation of new plastered surfaces and applying with two coat of cement base paint over chalk whiting priming on wall surfaces complete all as specified and as directed

Removing excavated material (soil) n.exc 50m and deposited where directed at a level n.exc 1.5m above the strating point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in foundation ,filling and mass concrete complete all as specified and directed.

S&F angle for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc. incl provision of binding wire complete all as specified and directed.

S&F galvanised iron wire using hot dip technology electrogalvanised coating chain link fencing wire mesh of size 75mm X 75mm having minimum dia of wire 3 mm conforming to IS 2712-2003 having a tensile strength of 400 to 500 MPa. The mesh wire and line wire of the fabric shall be manufactured from ISI marked (Make- TATA wireon) galvanized steel conforming to IS-280:2006 (4th Rivision). The kunckled ends should be atleast 50% of the size of square mesh. The wires used in fencing should be long lasting and resistance to corrosion and testing criteria fulfill the requirement as per IS 1161:1998 complete all as specified and directed.

M&L for mild steel round bars 6-8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping as in straining rod complete all as specified and directed.

S&F mild steel bolt having dia of n exc 12mm but not exc 20mm purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc 10 cm but n.exc 15 cm long complete all as specified and directed.

M&L for preparation of surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed .

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick fo ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Plain, 1.20 mm galvanised, mild steel sheeting, in ridges, hips, valley gutters, rain water box, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including welding and sealing the gaps with APP, complete all as specified and as directed.

S&F translucent poly carbonate corrugated sheet having thickness 2mm matching with Galvalume sheet roofing with adequate end and side lap fixed with coach screw and washer in roof, complete all as specified and as directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in chajja complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for formwork for fair finished surfaces of concrete (flat surface) to sides of pillers, posts, struts, pier, columns and stanchions complete all as specified and directed.

M&L for formwork to sides and fair finish soffits of floor or roof beam,beam hauchings, girders, bressum-mers, lintels cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar fair finish items including edgges complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n.exc. 200mm thick (Horizontal or sloping) fair finished surfaces of concrete flat complete all as specified and directed.

M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work and applying evenly a coat of blown bitumen @ 1.50 kg clean dry sand @ 0.05 cum/ sqm complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 35.00 mentioned above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM (1:6) all as specified complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even complete all as specified and directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified complete all as specified and directed.

M&L for two coats of Oil bound destemper on newely wall surface including chalk whiting, preparation to distempering including putty for smooth finishes complete removal ot existing surfaces complete all as specified complete all as specified and directed.

M&L for treatment of wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior alkali resistance primer applied @ 0.90 litre/10 sqm over 1 mm thick putty over new surfaces complete all as specified and directed.

M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

M&L for broken stone or boulder hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement, incl making joints 10mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with and incl bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-in-Charge. (Note: Stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F factory made single extruded WPC (Wood Polymer Composite) wire gauzed i.e. panel will be wire mesh in lieu WPC , the wire gauze shall be warped on additional square 8mm MS Solid tube and this tube shall be welded to MS frame complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail includning butt hinges complete all as specified and as directed.

S&F for 100 mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and as directed.

S&F Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and as directed.

S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and slidibg bolts of extruded section or cast-aluminium alloy complete all as specified and as directed.

S&F Powder coated aluminium (miimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engr-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-chargeher for openable/sliding shuttters) including all necessary fittings as directed

M&L for framed work such as grills ,grating,etc,with ends of bars shouldered and or riveted or forged into spike; framed guard bars for windows and iron gate conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality with oil putty in square n.exc 0.5m in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified.

M&L for cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) 75 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

M&L for non skid ceramic tiles coloured 7 to 8 mm thick(square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed with neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc, over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement from roof surfaces complete all as specified and directed.

M&L for providing water proofing treatment with a layer of APP based polymeric membrane, 3 mm thick (minimum), weighing not less than 3.60 kg/Sqm reinforced with polymer non woven fabric (weighing not less than 160 gm/ Sqm) shall be applied over one coat of cold bituminious primer @ 0.40 ltr/ Sqm ( membrane shall be laid using butane torch and sealing all joints etc, complete all as specified and directed . (Note: The overlaps shall be of minimum 75 mm on longitudinal direction and 100 mm on transverse direction)

M&L for one coat of aluminium paint over APP membrane complete all as specified and directed.

M&L for 15mm bore tubes “medium grade”, galavanised, with and including all fittings and fixed complete concealed in walls and ceilings or laid in floors, complete all as specified and directed.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, with wall flange screwed down, suitable for 15 mm bore pipe complete all as specified and directed.

M&L for PVC floor trap 100mm dia with grating including jointing to waste pipe in run lead complete and making good the disturbed surface to match the existing surface, complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with ruber ring joints laid in trences or in floors complete all as specified and directed.

S&F 110mm bore PVC(SWR) bends any radius complete all as specified and directed.

S&F 10 litre capacity PVC valveless, syphonic action type,low level flushing cistern white complete with in let, ball valve float and handle incl bracket complete all as specified and directed.

S&F vitreous china wash down water closet PAN (pedastal type) and trap white including seat cover and jet system, connection to drain (or outgoing pipe) and to flushing pipe,antisyphonage pipe,etc. complete all as specified and as directed.

S&F Vitreous China wash basin, white, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, complete all as specified and as directed.

S&F PVC connection pipe 15mm size & 450mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.

S&F cast copper alloy, chromium plated long neck pillar cock fancy type, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F CP Stop valve, any description, suitable for 15mm bore pipe as complete all as specified complete all as specified and directed.

S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) complete all as specified complete all as specified and directed.

S&F Grating with or without hole of PTMT (minimum weight 40gm) and fitting of shade matching to tiles/floor fixed with white cement including matching shade pigment complete all as specified and directed.

S&F of concealed stop cock, fancy type 15mm bore, chromium plated complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white including urinal spreader, 32 mm urinal coupling & necessary fittings, complete all as specified and directed.

M&L for fly ash brick work old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channel and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

M&L for 25 Users On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for, complete all as specified and directed.

M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 M dia X 3.0 M effective depth as per CEs drawings complete all as specified and directed.

M&L for DWCEP (SN8) 150 mm diameter Pipes for depth of 0.7-1.65 m laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to excuted and make sewar line funtional.

M&L for (DWC) structured wall polyethlene coupler/elbow 90/elbow 45/ end plug/reducer for piping system with non smooth external annular corrugated and smooth internal surface (Double Wall) for non presure sewage & drainage application pipes of standard length 6m, grade conforming to IS 16098 (part-II:2013) Stiffness Class SN-8 inner dia 150mm(tolerance limit plus& minus 2mm) anti rodent pipes laid in trenches all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil complete all as specified and directed.

M&L for 200 mm thick in two layers of each 100mm thick in pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 30cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge.” laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering and all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius,in half brick walls built in cement mortar (1:4) complete all as specified and directed.

M&L for treatment of wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior alkali resistance primer applied @ 0.90 litre/10 sqm over 1 mm thick putty over new surfaces complete all as specified and directed.

S&F Factory made steel ventilator with centre hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT orCOLD' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white including urinal spreader, 32 mm urinal coupling & necessary fittings ,complete all as specified and directed.

S&F CP Bib taps 15mm dia, with cfancy handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.

S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed.

S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement from roof surfaces complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 complete all as specified and directed.

M&L for providing water proofing treatment with a layer of APP based polymeric membrane, 3 mm thick (minimum), weighing not less than 3.60 kg/Sqm reinforced with polymer non woven fabric (weighing not less than 160 gm/ Sqm) shall be applied over one coat of cold bituminious primer @ 0.40 ltr/ Sqm ( membrane shall be laid using butane torch and sealing all joints etc, complete all as specified and directed .( Note: The overlaps shall be of minimum 75 mm on longitudinal direction and 100 mm on transverse direction) complete all as specified and directed.

M&L for one coat of aluminium paint over APP membrane complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft loose soil complete all as specified and directed.

M&L for 200 mm thick in two layers of each 100mm thick in pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 30cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge.” laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M&L for broken stone hardcore of guage n. exc 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Removing excavated soil n.exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for soft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed.

M&L for cement concrete in foundation filling and mass concrete type C2,1:3:6 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for fly ash brick work old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), without using extra cement complete all as specified.

Extra for forming fair finished drain or channel of manholes inner girth n.exc 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

E/M PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 136.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 136.00 above but 5 Amp socket on same board with other switches complete all as specified and directed

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed

S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed

S&F Turbo 12 watt inverter LED lamp 12 watt of capacity 220 - 240 volts, 50 Hz complete all as specified and directed

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

S&F wall LED security light fittings 35 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed.

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed.

Supply only ventilating metalic body exhaust fan 300 mm sweep 230 volt AC, heavy duty complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 8 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed.

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed.

S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

S&F Pipes galvanized, 25 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified, complete all as specified and directed

S&F gun metal, gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge Make : Vectus/Sintex/Prayag

S&F high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and as direced.

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

Supply, laying, connecting, testing and commissioning of LT under ground cable XLPE insulated, aarmoured heavy duty electric cable with aluminium conductor , 1100 vlts grade , cross sectional area 10 sqmm 2 core including taking out in trenches complete all as specified and directed Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified, complete all as specified and directed.

S&F wall LED security light fittings 25 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed.

S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed.

S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 4 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel, neutral link and incoming contact complete all as directed.

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

S&F ventilating exhaust fan 380 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed. Make: Usha/Havells/Bajaj/CG

S&F Pipes galvanized, 20 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top minimum three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge Make : Vectus/Sintex/Prayag

SPS TRADING (BID ID -3093182)

RAY STANDARD ENGG CO. (BID ID -3093666)