SPECIAL REPAIRS TO CERTAIN BLDGS AT NAUSHERA LINES DAMANA UNDER GE JAMMU

Amount

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed.

Taking down chowkats or frames with shutter(w/o taking off shutter from the frame) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter(w/o taking off shutter from the frame) n. exc 1.5 sqm complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm. complete all as specified and as directed.

Taking up or down steel water tubing and connection complete 15 mm / 20 mm bore complete all as specified and as directed.

Demolition of cement concrete as in ground and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling of cast iron drain pipes, jointed in cement mortar & taking out of trenches or from walls of any dia complete all as specified and as directed.

Racking out joints / pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc. complete all as specified and as directed.

M & L for prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balacing white lamination fixed with screws to timber frame work with 18 to 19 mm thickness complete all as specified and as directed.

S&F factory made plain framed panel shutter (two panel) with lock rail panel of 12mm veneered particle board with commerical veneering on both faces. The size of rail and style as per IS : 1003 of shutter 35 mm of 2nd class hard wood complete all as specified and as directed.

S&F factory made glazed skeleton shutters 35mm thick, open rebated and preparared to receive glass, gauze etc. (w/o sash bar) framing plain, chamfered or rounded, fitted with out and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, sec 8, clause 8.20(a) : of 2nd class hard wood complete all as specified and as directed.

S&F steel window 1.25 mm thick Box type (Primer coated) ERW hollow P section of size 60 x 25 mm double rebated comprises of both glazed Skelton shutter and wire gauged skeleton shutter ERW sec 50 x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60 x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 complete all as specified and as directed.

S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F hasp and staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 150mm complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:6 and finished even and smooth w/o using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth w/o using extra cement on walls or on facia of parapet of roof complete all as specified and as directed.

All as per Srl item No 16 but 10mm thick in cement mortar 1:3 as in ceiling complete all as specified and as directed.

Extra over rendering on plastering for walls/roof facia sides in isolated width not forming part or general plastering exc 15 cm but n.exc 30 cm complete all as specified and as directed.

All as per Srl item No 18 but n.exc 15 cm for sides of chajja complete all as specified and as directed.

M&L Painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L three coats of white wash including preparation of new surfaces on ceiling complete all as specified and as directed.

M&L OBD to walls with two coats of oil bond distemper, white or tinted including preparation of surfaces complete all as specified and as directed.

S&F galavanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete for old or new door chowkats welded if required complete all as specified and as directed.

S&F PVC connection 15mm, 450mm long complete all as specified and as directed.

S&F in repair vitreous china squating pan, orissa pattern size 580 x 440mm and making good, PVC valveless, syphonic action type, flushing cistern, low level 10 Ltr capacity, white with inlet ball valve, float and handle brakets, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and as directed.

S&F bib tap 15mm size cast copper alloy with crutch or butterfly handle screwed down screwed fro iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F stop cock 20mm brass cast copper alloy, screwed down with high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F concealed stop cock 15mm brass -do- chromium plated, long shank and cup complete all as specified and as directed.

S&F mild steel but hinges 75mm medium weight complete all as specified and as directed.

S&F mild steel but hinges 100mm medium weight complete all as specified and as directed.

S&F Aluminium Anodised door handle of size 150mm.

S&F angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and as directed.

S&F MS barrel tower bolt stove enamelled black with bright bolt, size of bolt 150mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed.

M&L rendering 10mm thick in cement mortar 1:4 as on vertical surfaces complete all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangulament ) area of each tile exeeding 0.11 but not exceeding 0.18 sqm, including roughening old surfaces of floors, over 15 mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangulament ) area of each tile exeeding 0.06 but not exceeding 0.11 sqm, in floors,including roughening old surfaces over 15 mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

S&F steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc. complete all as specified and as directed.

S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor complete all as specified and as directed.

S&F bends in repair (any radius) diminishing pieces or tapers (larger bore measured) of 75/100 mm dia bore complete all as specified and as directed.

S&F sand cast iron soil, waste & vent pipes, in any length with or without ears with cement joints laid I trenches/floors/fixed to walls of bore 75 mm bore complete all as specified and as directed.

All as per Srl item no 43 but except pipe complete all as specified and as directed.

All as per Srl item no 43 above but of 100mm bore complete all as specified and as directed.

M&L for applying two coat of oil bond distemper on wall on old treated surfaces including preparation to match complete all as specified and as directed.

S&F for Harrison rails mild steel chromium plated with fixing brackets etc. complete all as specified and as directed.

M&L one coat of white wash on ceiling including preparation old surfaces complete all as specified and as directed.

Preparing surfaces of newly plastered wall and applying two coat of cement base paint complete all as specified and as directed.

M&L Painting wood sufaces over 10cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of new surfaces complete all as specified and as directed.

M&L painting wood surfaces over 10cm width or girth with one coat of synthetic enamel paint as on old treated surfaces including preparation complete all as specified and as directed.

S&F shower rose PTMT any colour with arm 15mm size 195 mm long complete all as specified and as directed.

M&L for PCC 75mm thick as in path floor etc in 1:3:6 type C-1 complete all as specified and as directed.

M&L 50 mm thick PCC M-15 type but using 20 mm graded aggr as in plinth protection complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, look strike plate etc completed, as spd size of rame 105x 60mm complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, look strike plate ete completed, as spd size of frame 125 X 60 mm complete all as specified and as directed.

M&L granite stone any colour (of any type) 18 to 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing types over screed bed 20 mm thick in CM 1:6 including roughening of surfaces and cement slurry Kg/sqm (length of granite stone as length of cooking plate form) complete all as specified and as directed.

S&F for solid PVC door frame Ivory colour of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in opening including fixing lugs, hinges etc complete all as specified and as directed.

S&F factory made solid panel PVC door shutter Ivory colour 30 mm thick style consisting or frame made out of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site including bow handle tower bolts and hinges complete all as specifed and as directed.

S & F kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or influding fixing cantilever brackets and connecting unior to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and as directed.

S & F for Kitchen rack made of stainless steel 1 mm thick with plugs washers as overall size of 75cm x 75 cm including fixing to wall and all accessories complete all as specified and directed by Engineer-in-Charge.

S & F for towel rail 450 mm long PTMT fixed with and including chromium plated brass scres and wooden/plastic cleats complete all as specified and as directed.

S & F for PVC (SWR) pipes single sockets in any length with rubber rings 110 mm dia complete all as specified and as directed.

S & F for PVC (SWR) bends 110mm dia complete all as specified and as directed.

S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shet 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

S &F framed work such as grills, grating, etc with ends of bars shouldered and /or reveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk says; railings; formework of ways; railing framework of water tanks and similar work con forming to Fe-290. Gde -E-165 complete all as specified and as directed.

Demolition/ Dismantling to old RCC/PVC water storage tank any capacity including removing broken material from site complete all as specified and as directed.

PCC (1:2:4) type B-0 using 12.5mm graded crushed store aggregate as in PCC padding benching with min thickness of 50mm at the lower end & laid in slope 1:30 all as specified and directed by Engr-in-charge.

S&F in repair rotational moulded PVC water storage tank 500 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position complete with fittings all as specified and directed in SSR Part-I

Roof Treatment with the folowing specification :- (a) Applying evenly one coat of Bituminous Primer conforming to IS 3384-1986, @ 0. 3 ltrs per sqm over cleaned plastered surface. (b) Applying evenly one coat of blown Hot Bitument of Grade 85/25 @ 1.2 Kg per sqm on primed surfaces. (c) Applying a layer of APP based Polymeric Memberance 3mm thick (Minimum) weighting 3.5 Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm by torch application. The overlap shall be minimum 100 mm on traverce direction and 75 mm on longitudinal direction and sealing overlap by torch application. (d) Applying evenly one coat of Aluminium paint @ 0 .10 Ltr per sqm over the APP based polymeric Membrane.

Preparing old surfaces of wall (plastered or unplastered) and applying two coat of cement base paint complete all as specified and directed.

Resecuring or easing & adjusting without taking down aluminium shutters of any description exc 2 sqm each complete all as specified and as directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2no.) suitable handle (1 no.) complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified and as directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified and as directed.

All as per Ser No 78 here-in-before but except bricks complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) in type B0 1:2:4 (12.5mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balcoonies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20mm graded crushed stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span ,as in lintel band complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats , treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces complete all as specified and as directed by the Engineer in Charge

M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia all as specified and directed.

All as per Srl Item no 83 above but 5mm dia and over upto and incl 10 mm dia as in Binders,stirrups,spacer all as specified and directed.

M&L for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and directed. Note : From work required for these item included in the unit rate of this item.

S&F 5.5 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads nails etc. to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified and as directed.

Dismanting asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed..

Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and as directed.

Dismantling structural steel work including doors, gates of any description complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and directed.

S&F for frame work for ceiling with specification as under mentioned:-(i)GI section frame work (Powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web)X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X24mm flange 0.33mm thick. wall angle shall be screwed/ fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm C/C , then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge

S&F for 4mm thick of size 605X605 mm ,white pre-premiered, self embossed, reinforced Designer board for false ceiling Conforming to IS-14862 and ISO-8336:1993 fixed/laid/ inserted to GI framework at ceiling with screws complete all as specified and directed.

S&F for structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication as specified and directed.

S & F Plates (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long, Diameter of neck 16mm to 20mm all as specified and directed. Conforming to IS

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L marbonite tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F continous piano hanges, mild steel,bright finish or electrogalvanised,width of flap 30mm (when open) fixed with welding all as specified and as directed.

S&F Aluminium handle cast type, anodised size 125mm long, D type complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china valveless, syphonic action type, flushing cistern 10 ltrs low level white with inlet, ball valve, float and handle including brackets and connections to pipes and lever if any all as specified and as directed.

S&Fchromium plated toilet paper holder fixed to walls complete all as sprecified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, size of bolt 150mm complete all as specified and as directed.

S&F aluminium (extruded section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete for old or new door chowkats welded if required all as specified and as directed.

S & F Vitreous china wash hand basin white flat back of size 550 X 400 mm with pair of cast iron brackets and 32 mm dia GI light grade waste pipe of length not less than 80 cm fitted with brass chromium plated coupling outlet complete all as specified and as directed.

S& F Pillar tap 15mm bore cast copper alloy chromium plated fancy type, with capson heads screwed down high pressure with or without letter `hot or cold ' with long screwed shanks and fly nuts fixed to 15mm bore pipe etc complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 40mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

M&L Cutting holes in brick walls exc. half brick but n. exc. one brick built in cement mortar or cement lime mortar for inserting hold fast or GI pipe and making good dismantled portion in cement mortar 1:3 or cement conc. 1:2:4 type B-1 complete all as specified and as directed.

Taking down Old/UNSV copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for taking credit complete all as specified and as directed.

Taking down DBs, mainswitches etc of any size making good disturbed surface of wall/floors etc complete all as specified and as directed.

Taking Down of LT cable of any size in walls, trenches etc and making good to the disturbed surfaces of wall/floors etc in any size complete all as specified and as directed.

M&L for Point wiring One light point or One fan point controlled by one switch complete with 1.50 sqmm copper conductor multistrand pvc insulated FRLS and unsheathed cable in existing pvc rigid concealed conduit with New cast iron/pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continous pvc insulated multistrand copper wire 1.50 sqmm dia FRLS PVC insulated all as specified and as directed.

All as per item No 122 above but for multi 5 pin 5 amp socket outlet on same board all as specified and as directed.

All as per item No 122 above but for multi 3 pin socket outlet 5 amp socket on independent board all as specified and as directed.

All as per item No 122 above but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 1.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.complete with new CI/pressed steel sunken black with hylum top sheet cover 3mm thick all as specified and as directed.

S & F Socket outlet 5 Pin, 5A, flush type complete all as specified and as directed.

S&F angle/batten lamp holder on PVC square Blocks with PVC insulated body complete all as specified and as directed.

S&F LED Bulb 9 Watt 240 volts complete all as specified and as directed.

S&F switch piano flush button single pole one way 5 amps complete all as specified and as directed.

Sheet metal enclosure (factory made) double door for distribution board (when MCB's are to be used) Single pole neutral 240 V, 12 ways with 200 Amp rated busbar connectin with suitable size of thimbles complete all as specified and as directed.

S&F ceiling rose, 3 Phase/PVC/polycarbonate isolated body complete all as specified and as directed.

Supply and fixing LED tubelight fittings18 watt wall mounted LED batten rod extruded aluminium heated sink provided for efficient heat dissipation & integrated electronic driver Make Havells or equivalent complete all as specified and as directed.

S&F in repair MCB single pole and Neutral 40 Amp suitable for 240 volt complete all as specified and as directed.

S&F in repair MCB single pole 32 Amp suitable for 240 volt complete all as specified and as directed.

M&L switch piano flush button single pole one way 15 Amp all as specified and as directed.

M&L socket outlet 3, 5 pin and 15 Amp multi purpose shuttered type all as specified and as directed.

M&L for fan regulator stepped electronic type suitable for AC, 240 V all as specified and as directed.

S & F in repair LED street light fittings, 45 Watt, powder coated pressure die cast aluminium compact high power LED street light with heat resistant toughened glass with lens complete with suitable bracket , clamps and suitable length twin core wire incl taking out old unsv from pole all as specified and as directed. Note:- Rate is inclusve of bracket of suitable size made of GI medium grade pipe 1.2 mtr long bend to shape 120 degree and fixing with 2 Nos of suitable sizes clamps including nuts, washers bolts complete fittings all as specified and as directed.

M&L for MCCB DB verticale type made of sheet steel phosphatised, powder painted with nutral bus bar 200 amps neutral link, IP-43-IK09 protection grade, 415 Volts TPN with 4 way double door complete with MCCB as incomer and MCBs as out going complete all as specified and as directed. Make: Legrand/Havells/ABB

M&L for MCCB 4 Pole, current rating 100 Amp, thermal setting adjustable 70%-100% breaking capacity 25kA at 415V,50Hz, complete all as specified and as directed. Make Havell's/Legrand/Siemens/Schnieder

Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground of earth pit not less than 2.25m deep below level with top edge of plate not less than 1.5m below normal ground level, connected to galvanised earth wire 4mm as earthing lead by means of bolts, nuts check nuts and washers of galvanised iron or steel all shown in electrical plate No 03 connected to earthing test point all as specified or indicated including testing on completion.

M&L submain wiring with two single core copper conductor 6 sqmm multistrand pvc insulated FR and unsteathed cable with proper colour coding as red for phase, black for neutral and incl pvc rigid concealed conduit with necessary fittings and fixtures etc and continuous pvc insulated multistrand copper earth wire 4 sqmm dia in green colour all as specified and directed. Note all the three wire will be measured as one run.

All as per item No 142 above but for One light point controlled by two 2 way switches, with cable 1.5 sq. mm complete all as specified and as directed.

All as per item No 142 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size complete all as specified and as directed.

S&F modular switch two way 6 amps, 1 module complete all as specified and as directed.

S & F Bell push, flush type, 5A complete all as specified and as directed.

S&F calling bell ding dong type complete all as specified and as directed.

S&F in repair MCB single pole 32 Amp suitable for 240 volt complete all as specified and as directed.

S&F in repair MCB TPN 63 Amp suitable for 415 volt complete all as specified and as directed.

TPN DB double door 4 way, 415 volt complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in any type of soil and making good Bottom surface for laying / removing of cable all as specified and directed.

Supply, Laying, testing and commissioning underground cable XLPE Insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 35 Sqmm, 3.5 core laid in trenches on wall/pole/air/through pipe etc and including taking out old one in lieu all as specified and directed.

M&L Sand filling in cushing bed of cable and consolidation complete as specified and as directed.

Supply and laying comman burnt clay building sub class `B' bricks, laid over sand Cushioning laid at right angle along with cable, all as specified and as directed.

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25cm complete all as specified and as directed.

Remove of excavated any type of soil to distance n exc 50m all as specified and directed

S&L GI tubing tight grade 40 mm dia including all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/reducers/ saddles incl necessary threading/drilling works all as specified and directed of sizes (MS work will be measured under separate item in schedule).

M/s Koul & Sons

M/s Pee Kay Enterprises

Bidder Name

Jagbir Singh and Co

M/s Pee Kay Enterprises

M/s Koul & Sons