REPAIRS TO BRICK WORK, JOINERY, PLUMBING WORK AND MISC REPAIRS IN BLDG AT KAPRA, BHALRA AND GHATIMORE AT BHALRA MIL STN UNDER AGE (I) BHALRA

Amount

Taking up or down GI tubing and connection 15 mm bore , including cleaning for refixing completed all as specified and directed by Engineer-in-Charge.

Taking up or down GI tubing and connection 20 mm bore , including cleaning for refixing completed all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Taking down shutters exceeding 1 Sqm but not exc 2 Sqm each completed all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each ccompleted all as specified and directed by Engineer-in-Charge.

Dismantling of PVC 75/110mm bore drain pipe jointed in cement mortar and taking out any where, of required completed all as specified and directed by Engineer-in-Charge.

Dismantling of wall/ceiling board as in ceiling and lining of any gauge or any thickness including cover fillets all as completed all as specified and directed by Engineer-in-Charge.

M & L for 15 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc, completed all as specified and directed by Engineer-in-Charge.

M & L for 20 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors etc,completed all as specified and directed by Engineer-in-Charge.

Refixing 15mm bore old steel tubing and connection in new or old position including providing new GI fittings completed all as specified and directed by Engineer-in-Charge.

Refixing 20mm bore old steel tubing and connection in new or old position including providing new GI fittings completed all as specified and directed by Engineer-in-Charge.

S & F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed by Engineer-in-Charge.

S & F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed completed all as specified and directed by Engineer-in-Charge.

S & F in repairs for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completed all as specified and directed by Engineer-in-Charge.

S & F in repairs for Vitrous china wash hand basin, angle back, size 600X480 MM, snow white colour,including 32mm bore brass CP waste coupling with long screwed shank and fly nuts , PVC flexible waste pipe of bore 32 mm and adequate length, 15 mm bore PVC connection pipe 600 mm long with brass nuts on both side,complete all as specified & directed by Engineer-in-Charge.

S & F in repairs of CP Towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) completed all as specified and directed by Engineer-in-Charge.

S & F in repairs for 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe completed all as specified and directed by Engineer-in-Charge.

S & F in repair 15mm bore Bib taps chromium plated fancy type screwed down for iron pipe or for brass ferrule completed all as specified and directed by Engineer-in-Charge.

S & F for 15mm bore stop angle valve chromium plated, any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)→ and fixed completed all as specified and directed by Engineer-in-Charge.

S & F in repair, for soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/ plastic cleats completed all as specified and directed by Engineer-in-Charge.

S & F in repair, for 15mm bore bib taps,PTMTof any colour , screwed down, screwed for iron pipe or for brass ferrule (Min wt-90 gms) etc completed all as specified and directed by Engineer-in-Charge.

S & F in repair, for 600 mm long PVC connection 15mm size with PTMT nuts completed all as specified and directed by Engineer-in-Charge.

S & F, in repair Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe ) including connection to trap & flushing pipe etc complete including making good to floor completed all as specified and directed by Engineer-in-Charge.

S & F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc completed all as specified and directed by Engineer-in-Charge.

S &F in repair, Vitreous china bowl urinal flat back size 430X370X340 with grating and union for discharge pipe (excluding flushing cistern ,flush pipe and waste pipe) completed all as specified and directed by Engineer-in-Charge .

S & F in repair, for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors completed all as specified and directed by Engineer-in-Charge.

S & F in reapir for 75 mm bore PVC (SWR) Pipe single socketed in any length with rubber ring joints, fixed in wall and including brackets completed all as specified and directed by Engineer-in-Charge.

S & F in repair PVC (SWR) reducer for 110 mm bore pipe completed all as specified and directed by Engineer-in-Charge

S & F in repair PVC (SWR) cowls 75 mm bore pipe completed all as specified and directed by Engineer-in-Charge

S & F in repair for 110 mm PVC (SWR) WC connector with lip ring completed all as specified and directed by Engineer-in-Charge.

S & F in repair for PVC (SWR) S trap 110mm bore completed all as specified and directed by Engineer-in-Charge.

S & F in repair for PVC (SWR) junction single T equal or unequal 110mm completed all as specified and directed by Engineer-in-Charge.

S & F in repair for PVC (SWR) bends any radius, 110mm bore completed all as specified and directed by Engineer-in-Charge.

S & F in repair for 10 litre capacity PVC valveless, syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, flush pipe etc completed all as specified and directed by Engineer-in-Charge.

S & F in repair for plastic water closet seat conver, white/ black, closed pattern with flats bottom and cover and mild steel chromium hinging device, of approved make and quality etc completed all as specified and directed by Engineer-in-Charge.

S & F in repair for Brass CP wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15 mm dia pipes completed all as specified and directed by Engineer-in-Charge.

S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completed all as specified and directed by Engineer-in-Charge.

S & F in repair for mild steel,chromium plated curtain rods with brackets, including fixing stops,rollers bracket etc with harrison rails completed all as specified and directed by Engineer-in-Charge.

S & F in reapir for Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed completed all as specified and directed by Engineer-in-Charge. (Minimumweight 15mm-142gms/ 20mm-210gms./25mm-455gms/ 40mm- 690 gms)

S & F in reapir for Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed completed all as specified and directed by Engineer-in-Charge. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms)

S & F in reapir for Grating doom 125mm dia with waste hole of PTMT completed all as specified and directed by Engineer-in-Charge. (Minimum weight 40gms)

M & L for Brickwork cement mortor 1:6 with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in etc completed all as specified and directed by Engineer-in-Charge.

M & L for Brickwork cement mortor 1:4 with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in etc completed all as specified and directed by Engineer-in-Charge.

S & F for Pressed steel frames of sizes 165 mm x 60 mm x 1.25 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,completed all as specified and directed by Engineer-in-Charge.

S & F for 30mm thk Flush shutters solid core construction with block board core and two face is covred with decorative face veneer with lipping/frame to match completed all as specified and directed by Engineer-in-Charge.

S & F for 2nd class hardwood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to received glass, guaze etc (with sash bars) edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc completed all as specified and directed by Engineer-in-Charge.

S & F in repair for 200mm long aluminum anodised barrel tower bolts of extruded section completed all as specified and directed by Engineer-in-Charge.

S & F in repair for 150mm long aluminum anodised barrel tower bolts of extruded section completed all as specified and directed by Engineer-in-Charge.

S & F in repair for 150mm extruded aluminum alloy handles, cast type, anodized completed all as specified and directed by Engineer-in-Charge.

S & F in repair for 300mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy completed all as specified and directed by Engineer-in-Charge.

S & F in repair for stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples completed all as specified and directed by Engineer-in-Charge.

M & L for 3mm thk sheet glass ordinary quality and glazing with oil putty/ wooden beads in square n exc 0.5 Sqm in each pane incl hacking out old glass panes completed all as specified and directed by Engineer-in-Charge.

M & L for PVC panelling made up of PVC hollow panels 25/30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions, completed all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair completed all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair with using of WPC completed all as specified and directed by Engineer-in-Charge. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound completed all as specified and directed by Engineer-in-Charge.

M & L for preparation of new wall surfaces and applying two coats of oil bound distemper (white or tinted) over a coat of 1 mm thick wall putty over a coat of alkali resistance primercompleted all as specified and directed by Engineer-in-Charge.

M & L for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces completed all as specified and directed by Engineer-in-Charge.

M & L for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer completed all as specified and directed by Engineer-in-Charge

M/S KOTWAL CONSTRUCTIONS (BID ID -3374406)