QUANTUM OF WORKS INVOLVED IN PROVIDING NEW 250 KVA TRANSFORMER WITH LT CIRCUIT DUE TO OVERLOADING OF EXISTING TRANSFORMER AND PROVIDING NEW L.T. LINE AT DIFF. SITES IN BUSINESS PLAN YEAR 2025-26 UNDER THE AREA OF EDSD-II UNDER THE EDD-P.D. NAGAR, UNN

Amount

Safe Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

S.T. Pole 11 mtr long

PCC Pole 8.5 mtr long

Other loose line materials with including conductor, PVC Cable, Single and double Pole accessories, complete stay & earthing, insulator, Channel, S/S Angle etc. from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

Diff. Conductor for 11 KV Line

Three Phase A.B. Cable of diff. size

LT PVC Cable size 1x400 sq mm

Safe Carriage of following T/F from Elec. Store Center Unnao to diff. work dump site along with loading unloading and propoer stocking.

T/F 250 KVA 11/0.4 KV

Fixing of 11 KV D.O. Fuse Set at Double Pole with D.O. Fuse mounting Channel, clamps and nut & bolts including all associated work.

Supply & Fixing of following materials for above job-

11 KV D.O. Fuse Set

D.O. Fuse mounting Channel

Clamp for mounting Channel with N&B

Construction of masonry type T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.5 mtr x 1.5 mtr x 1.5 mtr (LxBxH) solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth as per RESPO norms. (All the material will be arranged by the contractor)

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 250 KVA T/F and All the jumpering & connection with the system are included in the scope of work. (All the required materials for above job shall be provided by contractor except 250 KVA T/F)

Supply & Fixing of following materials for above job-

Al. Lugs for 250 KVA T/F @ 04 nos. for each T/F

Copper L-piece of appropriate size @ 04 nos. for each T/F

Insulated Lead of Single Core Al. Cable of size 25 sqmm for HT side connection @ 30 mtr for each T/F

Earthing of Neutral of Transformer & Transformer body by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 40 ft. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X5 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral & Body connection being done by G.I. Strip as per RESPO norms . (All the material will be arranged by the contractor)

Supply & Fixing of Henley Type Tailless Unit Protection Cubical Panel 500 A, 650 V for 250 KVA DT including all associated work as per RESPO Norms. (All the material will be arranged by the contractor)

Laying of LT PVC Cable of size 1x400 sq mm from Transformer to LT Fuse Unit system including all associated work. (All the required materials for above job shall be provided by contractor except LT PVC Cable)

Fabrication and erection of Distribution Transformer fencing around Transformer and L.T. Distribution Pillar Box with 01 nos. gate & locking arrangement including cost of M.S. Angle size 40x40x5 and M.S. Flat size 25x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting of two coats of paint in iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust as per RESPO norms. (All the material will be arranged by the contractor)

Erection of STP Double Pole (11 KV Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site including all associated work.

Supply & Fixing of following materials for above job-

Clamp for Top and Dropper channel with N&B

Erection of PCC Pole (LT Line) including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Supply & Fixing of following materials for above job-

Suspension Clamp for ABC

Dead End Clamp for ABC

L.T. Clamp with Nuts & Bolts

Eye Hook

Piercing Connector

Grouting of PCC/ST Pole as per RESPO Norms with grouting materials.

Earthing as per RESPO Norms.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Supply & Fixing of following materials for above job-

Stay Clamp with N&B

Stay Insulator

Laying stringing and sagging of O/H 11 KV Line Three Phase by diff. Conductor including all associated work with joint/jumpers and binding of insulator as required.

Supply & Fixing of following materials for above job-

P.G. Clamp

Laying stringing and sagging of O/H Three Phase L.T. Line by ABC of diff. size including all associated work with joint/jumpers and binding of insulator as required.

Fixing of 3-Ph. Distribution Box with clamp, N&B with complete all work as required. (All the required materials as DB Box Clamps, Piercing Connectors, Nut & bolts etc for this job shall be provided by the contractor except Distribution Box)

Supply & Fixing of following materials for above job-

Clamp for Distribution Box with nut & bolt

Piercing Connector

M/s PRAMENDRA SINGH (BID ID -5530484)

Pankaj Trading Company (BID ID -5531621)