Repair to misc furniture items including charpoy GI pipe at GE Faridkot Mil Stn.

Amount

CHARPOY GI PIPE : FD-220 :

Dismantling old unserviceable long rail and S&F new long rail made out of GI tubing 32mm bore, medium grade ( ISI marked) duly threaded at both ends complete all as specified and shown on drawing.

Cutting of old existing unserviceable long rail retrieved from item No. 1.1 here-in-before and converting into two short rails duly threaded at both ends complete all as specified and shown on drawing.

Dismantling old unserviceable short rail,cutting and converting into two legs,one end of leg be threaded and on other end, 40mm dia 3mm thick MS sheet by continuous welding be provided. MS clamp duly painted with black enameled paint shall be provided by welding all as shown on drawing complete all as specified and directed.

Dismantling unserviceable stiffener and S&F new stiffener, made out of mild steel flat 32mmx 5mm and 860mm long by gas welding and one coat of primer complete all as specifed and shown on drawing

Removing old unserviceable 3 way elbow and S&F new 3 way elbow of GI, 32mm bore, (ISI Marked), weight not less than 400 grams each complete all as specified and directed.

Removing old unserviceable check nut and S&F new check nut of GI, 32 mm bore, weight not less than 100 gram eachs complete all as specified and directed.

Removing old unserviceable MDF Board top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7ply, type BB, of size 900x1950mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing.

Removing old unserviceable plywood top and S&F new top made of 12mm thick commercial plywood, BWR grade, 7ply, type BB, of size 900x1950mm, fixed with appropriate size nut & bolts with double washers complete all as specified and shown on drawing.

CHARPOY FOLDING IP WITH HARD TOP FD-388 (R):-

Dismantling old unserviceable plywood top and S&F new 8mm thick,plywood top, BWR grade complete all as specifed and shown on drawing

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces after preparation of surface complete all as specified and directed

CHAIR REVOLVING STEEL WITH ARMS TP:-

Removing of unserviceable cushion seat, padded back with upholestered leather/tapestry cloth, padded cushion of arms and providing New cushion seat of density 40mm, padded back with upholestered leather/tapestry cloth, padded cushion of arms complete all as specifed and shown on drawing.

M&L for replacement of unserviceable bearing of revolving chair as per existing complete all as specified and directed .

M&L for replacement of unserviceable wheel of chair as per existing complete all as specified and directed .

M&L for replacement of hydroulic fittings of chair as per existing complete all as specified and directed .

M&L for replacement of base assembly of chair as per existing complete all as specified and directed.

CHAIR WRITING STEEL FD/E6/MAP/12 :-

Removing unserviceable cushion seat & back with upholestered tapestry cloth including PVC beading and providing New cushion seat & back of density 40mm with upholestered tapestry cloth not less than Rs 250 per meter including PVC beading and providing in serviceable condition duly repaired in all respect complete all as specifed and shown on drawing.

S&F in replacement unserviceable arms handle black integral skin made of ply propylene ,co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and shown on drawing.

M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (black colour) complete all as specified and directed.

CHAIR DINING LONG BACK FD/MAP-II/04

Dismantling existing unserviceable rear leg and S&F new rear leg of Ist class seasoned hard wood all as specified and shown on drawings.

Dismantling existing unserviceable front leg and S&F new front leg of Ist class seasoned hard wood all as specified and shown on drawings.

Dismantling existing unserviceable side rail and S&F new side rail of Ist class seasoned hard wood all as specified and shown on drawings.

Dismantling existing unserviceable front rail and S&F new front rail of Ist class seasoned hard wood all as specified and shown on drawings.

Dismantling existing unserviceable back rail of seat and S&F new back rail of seat of Ist class seasoned hard wood all as specified and shown on drawings.

Dismantling existing unserviceable centre stiffener and S&F new centre stiffener of Ist class seasoned hard wood all as specified and shown on drawings.

Removing of old unserviceable cushion of seat and S&F of new cushion in the size of 18"x18"x75mm of density 40 covered with superior quality leatheriest rexene with best upholtery to seat of chair all as specified and shown on drawings.

M & L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

CHAIR VARANDAH(FD/MAP/12)

Removing old unserviceable plastic seat & back and S&F new PVC seat & back, 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick and weight of the PVC seat & back shall not be less than 1.85 kg.complete all as specified and shown drawing .

Dismantling existing unserviceable 'U' shaped legs and S&F new 'U' shaped legs made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drawing.

Dismantling existing unserviceable rear & front tube of seat and S&F rear & front tube of seat made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drawing.

Dismantling existing unserviceable side tube of seat and S&F side tube of seat made out of 18 gauge mild steel round pipe of dia 19mm by gas welding complete all as specified and shown on drawing.

Gas welding to broken spot of 20mm round pipe complete all as specified and directed . Note:-Welding alround shall be considered as one point.

M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (white colour) on chair verandah complete all as specified and directed.

CHAIR COMPUTER (TP):

Removing unserviceable cushioned seat, back padded with upholestered leather/tapestry cloth, padded cushion of arms and providing the same with new materials of same or superior quality and repair/removing of unserviceable parts of tilting mechanisam with swivel system and providing in serviceable condition duly repaired in all respect as directed .

Replacing the existing unserviceable bearing with new bearing of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable wheel with new wheel of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable hydrolic fitting with new hydrolic fitting of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable base assembly with new base assembly of same or superior quality complete all as specified and directed.

Chair Dining FD/MAP-II/05 :-

Dismantling existing unserviceable rear leg and S & F new rear leg of 1st class seasoned hard wood complete all as specified and shown on drawing.

Dismantling existing unserviceable front leg and S & F new front leg of 1st class seasoned hard wood complete all as specified and shown on drawing.

Dismantling existing unserviceable side rail and S & F new side rail of 1st class seasoned hard wood complete all as specified and shown on drawing.

Dismantling existing unserviceable front rail and S & F front rail of 1st class seasoned hard wood complete all as specified and shown on drawing.

Dismantling existing unserviceable side stiffener and S & F new side stiffener of 1st class seasoned hard wood complete all as specified and shown on drawing.

Dismantling existing unserviceable center stiffener and S & F new center stiffener of 1st class seasoned hard wood complete all as specified and shown on drawing.

Removing old unserviceable plastic seat and S&F new PVC seat 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick with holes and weight of the PVC seat shall not be less than 0.50 kg.

M&L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

SOFA SET 4/5 SEATER: FD-281:

Removing old unserviceable legs and providing new legs of size 75x35x530mm made out of Ist Class seasoned hard wood duly finished complete as specified and shown on drawing.

Removing old unserviceable arms and providing new arms of size 35x70x560mm made out of Ist Class seasoned hard wood duly finished complete as specified and shown on drawing.

Removing old unserviceable side rail and providing new side rail of Ist Class seasoned hard wood duly finished of section 35x70mm and 560mm long complete as specified and shown on drawing.

Removing old unserviceable front rail and providing new front rail of Ist Class seasoned hard wood duly finished of section 35x100mm and 1590mm long complete as specified and shown on drawing.

Removing old unserviceable rail for rear top & bottom and providing new rail for rear top & bottom of Ist Class seasoned hard wood duly finished of section 35x70mm and 1590mm long complete as specified and shown on drawing.

Removing old unserviceable battens of rear back and providing new battens of rear back of Ist Class seasoned hard wood duly finished of section 35x50mm and 1590mm long complete as specified and shown on drawing.

Removing old unserviceable bearer bottom of seat and providing new bearer bottom of seat of Ist Class seasoned hard wood duly finished of section 20x50mm and 1590mm long complete as specified and shown on drawing.

Removing old unserviceable front rail and providing new front rail of Ist Class seasoned hard wood duly finished of section 35x100mm and 530mm long complete as specified and shown on drawing.

Removing old unserviceable rail for rear top & bottom and providing new rail for rear top & bottom of Ist Class seasoned hard wood duly finished of section 35x70mm and 530mm long complete as specified and shown on drawing.

Removing old unserviceable battens of rear back and providing new battens of rear back of Ist Class seasoned hard wood duly finished of section 35x50mm and 530mm long complete as specified and shown on drawing.

Removing old unserviceable bearer bottom of seat and providing new bearer bottom of seat of Ist Class seasoned hard wood duly finished of section 20x50mm and 530mm long complete as specified and shown on drawing.

Removing old unserviceable cushion foam seat & back and S&F new cushion in the size of 21"x 22" x 4" of density 40, covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set complete as specified and shown on drawing.

Removing old unserviceable tapestry cloth from cushion seat and S&F new tapestry cloth having rate not less than 250/- per mtr with best upholstery to seat of sofa set complete as specified and shown on drawing.

M&L for french polishing to wooden surfaces of Sofa set 5 seaters after preparing the surfaces smooth complete all as specified and directed.

M&L for french polishing to wooden surfaces of Sofa set 4 seaters after preparing the surfaces smooth complete all as specified and directed.

TABLE BED SIDE (MAP) : FD/E6/MAP/15 (R)

Dismantling existing unserviceable top and S&F new top made out of pre-laminated particle board 18 mm thick, exterior grade with 4 mm thick teakwood beading alround the top complete all as specified and shown on drawing

Dismantling existing unserviceable drawer and S&F new drawer made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and shown on drawing

Dismantling existing unserviceable bottom and S&F new bottom made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and shown on drawing.

Dismantling existing unserviceable sides and S&F new sides made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and shown on drawing.

Gas welding to frame made of 18mm mild steel square pipe complete all as specified and directed. Note:-Welding alround shall be considered as one point.

Dismantling existing unserviceable front legs and S&F new front legs made out 18mm thick mild steel square pipe of size 20x20mm having length 500mm, fixed with steel screw duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Dismantling existing unserviceable 'U' shaped legs and S&F new 'U' shaped legs made out 18mm thick mild steel square pipe of size 20x20mm having length 600mm, fixed with steel screw duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Removing existing unserviceable handle and S&F new mild steel powder coated handle 100 mm long for drawer complete all as specified and directed .

Provision of PVC hard rings at the bottom of legs

Removing old unserviceable back and S&F new back of 6 mm thick commercial BWR plywood with headless nails complete all as specified and shown on drawing.

M&L for french polishing to wooden surfaces of table bed side after preparing the surfaces smooth complete all as specified and directed.

TABLE DRESSING LADIES FD-251, FD-32(M) & FD/MAP-II/10

Dismantling old unserviceable ply wood from back of mirror and S&F new 6mm thick plywood, commercial, BWR quality of mirror frame as complete all as specified and shown on drawing.

Dismantling old unserviceable drawer and S&F new drawer of 12mm thick prelaminated particle board with knob 25mm dia all as specified and shown on drawing.

Dismantling old unserviceable legs and S&F new leg of Ist class seasoned hard wood wood complete all as specified and shown on drawing.

Dismantling old unserviceable glass shutter and S & F new glass shutter of 5mm thick of required size complete all as specified and shown on drawing.

Dismantling old unserviceable door shutter and S&F new door shutter of 12mm thick prelaminated particle board all as specified and shown on drawing.

Dismantling unserviceable frame of looking mirror and S&F new frame of section 20mm x 25mm made of Ist class seasoned hardwood , made to shape as shown on drawing and 12mm x 12mm in section teak wood beading at the back complete all as specified and shown on drawing.

Removing existing unserviceable handle and S&F new stainless steel powder coated anodized handle complete all as specified and directed .

Dismantling unserviceable knob and S&F new aluminium anodized knob of 25mm dia with nut & washer complete all as specified and shown on drawing.

Dismantling old unserviceable looking mirror and S&F new looking mirror of size 366x1220x5mm thick complete all as specified and shown on drawing.

Removing old unserviceable existing dunlop cushion seat and S&F new dunlop cushioned seat of size 349mmx340mmx40mm,density 40, covered with superior quality tapestry cloth with best upholstery complete all as specified and shown on drawing. .

Removing old unserviceable side and S&F new side made out of 18 mm thick prelaminated particle board , exterior grade complete all as specified and shown on drawing.

Removing old unserviceable castor and S&F new castor 50mm dia, made of PVC, fitted with bottom of stool dressing complate ete all as specified and shown on drawing.

Dismantling old unserviceable looking mirror and S&F new looking mirror of size 1300x450x5.5mm thick complete all as specified and shown on drawing.

M&L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed. . Note :- A Sum of Rs. 91,721.20 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 & 23 (Schedule of credit) of Tender Documents.

Vinod Kumar Bajaj