PROVN OF GEYSER 25 LITRS AND WATER STORAGE TANK AND SANITARY FITTINGS FOR RECT LINES BLDGS AND OR LINES AT ARC SHIFTING OF GI/DI PIPE LINE NEAR MULTIPURPOSE HALL AT 58 GTC HAPPY VALLEY AND PROVISION OF 10 X GEYSERS FOR FAMILY QTRS AND OTM ACCN AT UNI

Amount

Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size, complete, all as specified and directed. Note: two run of 4.0 sqmm cable, one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length). Make- Cable- Finolex/ RR cable/ Havells, PVC Casing Capping- Presto plast/ Finolex/ Kalinga.

S&F sheet metal enclosures with socket and MCB single pole and neutral enclosure with two pin and earth plug and socket, with one single pole MCB 240 Volt- 20Amp, complete, all as specified and directed.

Supply and fix and testing of storage type, electrically driven, ISI Marked, water heater (Geyser) of capacity 25 liters, vertical type, wall mounted, BEE 5-star rating, AC, single phase including necessary fixing arrangements, electric and water connection complete all as specified and as directed. Make: Havells Puro turbo Cat part no. GHWASEIB025 or equivalent make in Racold / Bajaj/ LG.

Supply and laying GI tubing medium grade, for geyser connection, 15mm bore with all GI fittings, fixed to walls and ceiling or laid in floor for cable crossing, complete, all as specified and as directed.

S&F CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe, complete, all as specified and as directed. Make: Prayag Cat part No.7606 or equivalent model in Jaquar / Hindware/ Parryware.

S&F CP Brass angular Stop cock,15 mm bore, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. Make: Prayag Cat part No. 8010 or equivalent model from make Jaquar/ Marc/ Parryware.

S&F heat resistant PVC connection pipe for hot and cold water, 15mm size, 450 mm long with PTMT nuts, complete, all as specified and as directed. Make: Parayag/ Polytuf/ Havells

Supply, laying and connection in trenches GI tubing, medium grade, including fittings such as tee, bend, nipple, socket, reducer, flange, union etc., of 25 mm bore pipe, complete, all as specified and as directed by Engr in Charge. Note - excavation will be measured and paid separately under relevant item

Supply, laying and connection in trenches GI tubing, medium grade, including fittings such as tee, bend, nipple, socket, reducer, flange, union etc., of 20 mm bore pipe, complete, all as specified and as directed by Engr in Charge. Note - excavation will be measured and paid separately under relevant item

S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 25 mm bore dia of pipe, complete, all as specified and directed by Engr-in-Charge.

S&F Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 20 mm bore dia of pipe, complete, all as specified and directed by Engr-in-Charge.

Supply & lay in repair pipe ductile iron, S/S including spatial, class K-7, 100 mm, complete, all as specified and directed by Engr-in-Charge.

Supply and lay in repair pipe galvanised iron medium class including fittings 150 mm, complete, all as specified and directed by Engr-in-Charge.

S & F sluice valve in repair flanged for class 1.6 PN 100 mm, complete, all as specified and directed by Engr-in-Charge.

S & F sluice valve in repair flanged for class 1.6 PN 150 mm, complete, all as specified and directed by Engr-in-Charge.

M & L cutting existing DI pipe line of 100 mm dia and inserting 'Tee' 100x100x100 mm, complete, all as specified and directed by Engr-in-Charge.

M & L cutting existing GI pipe line of 150 mm dia and inserting 'Tee' 150x150x150 mm, complete, all as specified and directed by Engr-in-Charge.

M & L for PCC type D2 (1:2:4) using 20 mm graded crushed stone aggregate etc as in foundation, filling and mass concrete etc necessary formwork, complete, all as specified and directed by Engr-in-Charge.

M&L for construction of VALVE PIT TYPE 'A' of PCC BLOCK MASONARY and of size 900 mm x 900 mm x 900 mm (internal dimension), with PCC 1:3:6 type C1 solid block walling 20cm thick set in cement mortar 1:4 over 100mm thick 1:4:8 type D2 foundation and 50mm thick PCC 1:2:4 type B1 coping on the top of wall with rendering 15mm thick cement mortar 1:4 on inside and exposed external surface MS sheet cover angle iron frame with locking arrangement etc. including all fittings and fixtures and shown in Drg No. TD/EM/6 Sheet 1/2 including dismantling old unserviceable one, complete, all as specified and directed by Engr-in-Charge.

Excavation in trenches for laying of GI water tubing etc getting out in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5m deep, complete, all as specified and directed by Engr-in-Charge.

M&L for cutting of existing road / hard standing / foot path surfaces for laying water tubing of any descriptions and making good to disturbed surfaces with plain cement concrete type C-2 (1:3:6, using 40 mm graded crushed stone aggregate etc complete all as specified and as directed by Engr in Charge.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm thick, complete, all as specified and directed by Engr-in-Charge.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete, all as specified and directed by Engr-in-Charge.

Material & Labour for sub main wiring with two single core 2.5 sqmm, FRLS, ISI marked PVC Insulated unsheathed multistranded copper cable, and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 2.5 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed.

S&F switch socket combination, 5A/16A 5 in 1 complete inclusive all necessary fixing arrangements and all incoming and outgoing electric connection and testing for entire satisfaction of Engr-in-Charge

Supply fixing & testing of storage type water heater of capacity 25 Ltrs, Vertical type, wall mounted, electrically operated, single phase, 5-star rated, pressure 8 bar, warranty on tank 7 years, warrant of heating element 3 years, product warrant 2 years. Make-Usha and equivalent make Crompton or Havells.

Supply and fix GI tubing 15mm dia medium grade complete inclusive threading, elbow, socket, socket reducer, Nipple and all incoming and outgoing water connection from existing pipe line 20/25mm dia and testing for entire satisfaction for Engr-in-Charge.

Supply and fix GI tubing 25mm dia medium grade complete inclusive threading, elbow, socket, socket reducer, Nipple and all incoming and outgoing water connection from existing pipe line 20/25/40 mm dia and testing for entire satisfaction for Engr-in-Charge.

Supply and fix stop cock, 15mm, cast copper alloy chromium plated fancy type, hot & cold and testing complete all as specified and as directed by Engr-in-Charge

Supply and fix bib tap 15mm dia, outer thread, cast copper alloy chromium plated, fancy type complete inclusive 15mm dia GI socket and all incoming water connection and testing for entire satisfaction for Engr-in-Charge

S&F Gun-metal, globe or gate valves, 25 mm bore (ISI marked), inner threaded, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed including Testing to the entire satisfaction of Engr-in-charge.

S&F Gun-metal, globe or gate valves, 15 mm bore (ISI marked), inner threaded, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and as directed including Testing to the entire satisfaction of Engr-in-charge.

S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks, three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx. length 1.5 mtr, 25 mm dia wash out pipe with plugged at one end, complete, all as specified and as directed by Engr-in-Charge

S&F 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe (minimum wt 25mm-455gms), complete, all as specified and directed.

S&F tank nipple of size 25 mm dia bore suitable for HDPE tank (minimum wt 25mm-65gms) complete, all as specified and directed by Engr-in-Charge.

M&L PCC, type C1, (1:3:6, using 20mm graded stone aggregates) as in coping including formwork, complete all as specified and as directed.

M&L for Rendering 15 mm thick in cement sand mortar (1:4) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

R K CONSTRUCTION

M/S MANOJ KUMAR BAL

GLIBS CONSTRUCTION

SETHI ENTERPRISES