Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC QUOTED RATES ARE REASONABLE AND ACCEPTED | |
| 2 | L2₹33.2 L+₹26,054 (0.79%)Rejected-Finance ROOM NO 281 GANESH MARUTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹34.4 L+₹1.5 L (4.48%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹36.2 L+₹3.2 L (9.73%)Rejected-Finance 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹42.7 L
EMD Value
₹85,400
Closing Date
13 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BIHTA
GARRISON ENGINEER (AF) MILITARY ENGINEER SERVICES BIHTA, PATNA-801103
ADDITION/ALTERATION TO LIVING-IN-ACCOMMODATION OF SNCOS AT AF STN BIHTA (PHASE-III)
2024_MES_638000_1
8376/BHT/E8
Open Tender
Civil Works
Item Rate
180 days
BIHTA
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) BIHTA
₹85,400
Yes
28 Mar 2024
18 Jan 2024
20 Feb 2024
18 Jan 2024
13 Feb 2024
31 Jan 2024
19 Jan 2024 - 24 Jan 2024
Amount
Taking up or down 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal to store, complete all as specified and as directed.
All as per item No 1 here in before but 20 mm bore of pipe, complete all as specified and as directed.
S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors as in concealed/surface of 15 mm bore pipe, complete all as specified and as directed.
All as per serial item 3 here in before but 20 mm bore of pipe, complete all as specified and as directed.
Taking down and refixing of old 15 mm bore galvanised iron tubing and connection in new or old position, complete all as specified and as directed.
All as per item no 5 here in before but 20 mm bore of pipe, complete all as specified and as directed.
Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.
S & F in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S & F in repair chromium plated fancy type stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore, complete all as specified and as directed.
S & F in repair of fancy type chromium plated concealed type stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore, complete all as specified and as directed.
S & F in repair of chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union, complete all as specified and as directed.
S & F in repair of 15 mm bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
S & F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality, complete all as specified and as directed.
S&F in repair of soap Dish Stainless steel chromium plated decorative type approximate size 160x160x90mm, complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed to wall, complete all as specified and as directed.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor, complete all as specified and as directed.
S & F in repairs vitreous China pedestal pattern of approved make white (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc complete with plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc, complete all as specified and as directed.
S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make, complete all as specified and as directed.
S/F in repair of vitreous china urinal, bowl type (flat back), of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, complete all as specified and as directed.
S&F in repairs 15mm bore pillar taps, Fancy type, cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe, complete all as specified and as directed.
S&F rotational mouleded polythene water storge tank white colour triple layer (Cylindrical vertcal closed top) hoisted and fixed in position all as specified of 500 ltr capacity including dismantling old water tank and remove from site, complete all as specified and as directed.
S & F in repairs 75mm CI (SWR) floor trap, plain with grating including jointing with cement etc complete all as specified and as directed.
Dismantling existing cast iron soil waste and vent pipe upto 100 mm internal dia, fixed to wall laid in trenches incl all fitting & accessories, complete all as specified and as directed.
S & F 100 mm dia spun cast iron soil waste and vent pipes in any length with or without ears, laid in trenches or in floor with cement joints, complete all as specified and as directed.
S & F 100 mm dia spun cast iron soil waste and vent pipes in any length with or without ears, fixed to wall with cement joints, complete all as specified and as directed.
S & F 75 mm dia spun cast iron soil waste and vent pipes in any length with or without ears, laid in trenches or in floor with cement joints, complete all as specified and as directed.
S & F 75 mm dia spun cast iron soil waste and vent pipes in any length with or without ears, fixed to walls with cement joints, complete all as specified and as directed.
S & F in repairs of 100 mm bore cast iron bends of any radius, diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.
S & F in repairs of 75 mm bore cast iron bends of any radius diminishing pieces or tapers (larger bore measured), complete all as specified and as directed.
Taking down chowkats or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed.
Taking down chowkats or frame with shutter (without taking off shutters from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and as directed.
Taking down of shutters of any description not exc 1.00 Sqm each, complete all as specified and as directed.
Taking down of shutters of any description n exc 1.00 Sqm each and resecuring or easing and adjusting and refixing in same opening, complete all as specified and as directed.
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge.
S & F for 30 mm thick factory made solid panel PVC door shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings as directed by Engineer-in-Charge.
S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc, complete all as specified and as directed.
M & L for PCC 1:3:6 type C-0, using 12.50 mm graded stone aggregate as in filling back side of pressed steel door frames, complete all as specified and as directed.
S&F glazed/wire gauged/skeleton shutter (two panel) 35mm thick out of (well kiln seasoned) 2nd class hard wood (hollock) the size of rails and style as per IS, chemically pressure treated in factory against termite infestation prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, complete all as specified and as directed. Note:- Wire gauge/glazing to be measured and paid separately.
S&F factory made 40mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class HW (Hollock) kiln seasoned and chemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial ply complete all as specified and as directed.
S&F Butt hinge, medium weight, cold rolled mild steel 100 mm long, all as specified and as directed
S&F aluminium anodised sliding door bolt with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 long and fixed complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed, complete all as specified and as directed.
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and as directed.
S&F extruded aluminium alloy handle fabricated type anodised 100 mm long, complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm, complete all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.
S&F factory made steel ventilators with top hung shutters incl hinges, steel handle, steel pegs & stays, complete with one shop coat of red oxide primer, complete all as specified and as directed.
S&F sheet glass 3 mm thick frosted ordinary quality and glazing with oil putty or glazing pins/spring clip with steel frame, complete all as specified and as directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, steel pegs and stays, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, steel pegs and stays, without glazing bars, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stones, concrete or brick surrounds, glazed with putty or fixed with glazing pins/clips etc, complete all as specified and directed.
S&F sheet glass 3mm thick ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.
S&F mild steel framed work such as framework of cooler stands and similar wk conf to Fe290 Gde E-165 fixed to wall with fastener (Fastners shall be measured and paid separately under respective item), complete all as specified and directed.
Supply and fix GI fastners 12 mm dia and 100 mm long, complete with nut and washer, suitable for fixing cooler stand, complete all as specified and directed.
Taking down cement plaster on brick or stone walls & chajja including raking out joint, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M & L for 15 mm thick rendering in CM (1:6) on vertical surfaces of fair faces of brick walls, finished even and smooth without using extra cement, complete all as specified and directed.
M & L for 5 mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:4) on vertical surfaces of fair faces of brick walls, finished even and smooth without using extra cement with using water proofing compound (WPC will be measured and paid separately), complete all as specified and directed.
Supply only ISI marked integral water proofing compound of approved quality, complete all as specified and directed.
M&L for new plastered surfaces of walls applying two coat of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.
M&L for complete removal of existing treatment from wall surfaces and applying two coat of cement base paint over a coat of primer, complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old previously treated surfaces of ceiling and applying two coats of white wash, complete all as specified and as directed.
M&L new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a layer of 3 mm thick approved wall care putty, complete all as specified and as directed.
M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a layer of 3 mm thick approved wall care putty complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of wall and applying two coat of white wash, complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description over a coat of pink primer, over 10 cm in width or girth, not otherwise described, complete all as specified and as directed.
M&L for old painted wooden surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described over one coat of red oxide primer, complete all as specified and directed.
M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described, complete all as specified and directed.
Roughening surfaces of old concrete floor by hacking, picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in floor/sub floor etc, complete all as specified and directed.
M&L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in floor/sub floor etc, complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25 mm thk over 15 mm thk cement screed bed in CM 1:6, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish, complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 17-20 mm thk in riser of steps, skirting, dado and pillar laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish, complete all as specified and as directed.
M & L joint free Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.
Demoliton of stone slabs and tiles of any description or thickness in floors, apron, platform etc laid, bedded and pointed in any mortar, complete all as specified and directed.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation, complete all as specified and directed.
M & L glazed ceramic coloured tiles (300 x 450 x 6-7 mm thick) as in vertical surfaces such as skirting dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match with the tiles, laid over and including 1:4 cement plaster 10 mm thick on brick work and concrete surface, complete all as specified and as directed.
M & L joint free Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm thick screed bed 1:6, complete all as specified and directed.
S&F Harrison rail mild steel chromium plated of 25 mm dia for curtain rod fixed with two Nos of brackets for each rail, complete all as specified and as directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed.
Dismantling of Textile old roof coverings including frames (if any), complete all as specified and as directed.
M&L for providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc, complete all as specified and as directed.
M&L for providing, plain cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
M&L for rendering 10 mm thick on concrete surfaces of roof in cement mortor 1:4 with using water proofing compound, complete all as specified and directed. NOTE :- WPC shall be measured and paid seperatelly.
M&L for applying bituminous primer @0.30 Ltr/sqm, complete all as specified and directed.
M&L for applyng tack coat of hot blown bitumen 85/25 grade @1.2 kg per Sqm including cleaning surface, complete all as specified and as directed.
M&L APP base polymeric water proofing membrane minimum weight 3 kg/Sqm consisting of 90 to 100 micron thick central core of HMHDPE film, laid with 100 mm side lap/end lap over hot bitumen on prepared surface, complete all as specified and as directed.
M&L for 40 mm thick brick tiles laid on bedding of 20 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof, complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.
Material and Labour for point wiring complete with 1.5 sqmm FRLSH grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit pipe of 20 mm dia on walls, surface on roofs and beam etc including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls with laminated sheet top cover 3mm thick for housing the switches, sockets regulators etc all as specified and directed controlled by one switch, for the following: - (a) One light point or one fan point controlled by one switch with cable 1.5 sq mm.
(b) One 3pin/5pin socket outlet 5 amps on independent board with cable 1.5 sqmm
(c) One 5 Amps socket point on same board with other switches
All as per item No.98.20 above but point wiring complete with cable 2.5 Sqmm for 6 pin 15 A socket outlet on independent board.
Material and Labour for switch piano flush type 5A, SP one way, 220 volts AC, complete all as specified and directed.
Material and Labour for socket 5 pin 5 Amps flush type, 220 Volts AC, complete all as specified and directed.
Material and Labour for switch piano flush type single pole one way 15 Amps, 220 volts AC, complete all as specified and directed.
Material and Labour for socket outlet 6 pin 15/5 Amps flush type, 220 volts AC, complete all as specified and directed.
Material and Labour for ceiling rose 3 terminals, 65 x 20 mm, 220 volts AC, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type 1.6 mm thick die cast housing with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rod, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM mm sweep, with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) including taking down and depositing the old fan to MES store yard, complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, making good of disturbed surface, complete all as specified and directed.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including taking down and depositing the old geyser to MES store yard, complete all as specified and directed.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB, complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB, complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB, complete with connection testing and commissioning.
S & F MCB DB SPN 8 Way with 100 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB SPN 8 Way, complete all as specified and directed.
Supply and fixing 415V 10KA 'B' curve FP 40-100 Amps miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and directed.
S & F sheet metal enclosures MCB DB TPN DB 4 Way with 200 Amps rated busbar, Double door, 415 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking down old u/s MCB DB and MCBs complete all as specified and directed.
Supply and fixing MCCB 4 pole 415 Volts 100 Amps 16 KA, Ics = 100% Icu, with MS flat bar of suitable size as per existing hosuing of DB/panel, complete all as specified and directed.
S&F sheet metal enclosure with a two pin and earth plug and socket complete including one single pole MCB 20 A 10 KA C series flush into walls and making good disturbed surfaces complete all as specified and directed.
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLSH grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit pipe of 25 mm dia and accessories in surface of wall, roofs etc with one run of 4 Sqmm single core FRLSH grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor as earth continuity conductor connected with earth dolly and mains, complete all as specified and directed.
M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLSH grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit pipe of 25 mm dia and accessories in surface of wall, roofs etc with one run of 6 Sqmm single core FRLSH grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor as earth continuity conductor connected with earth dolly and mains, complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant glass cover, complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including clamps and 1.2 mtr 40 mm dia GI light grade pipe as bracket for mounting, complete all as specified and directed.
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized earth lead wire 4.0 mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 Cm, complete all as specified and directed.
Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point, complete all as specified and directed.
Supplying and laying pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), laid flat perpendicular to the cable adjoining each other as in protection to UG cables, complete all as specified and directed.
M&L for fine sand free from sharp material as in filling in trenches for cable protection incl necessary punning and consolidation as reqd, complete all as specified and directed. (Note: Depth of sand shall be measured after punning).
M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.
Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with 25 Sqmm, 4 core aluminium conductor, 1100 Volts grade, complete all as specified and directed.
S&F 40 mm bore GI tubing, light grade, with all fittings and laid in trenches/under roads, drains etc, or fixed to poles/walls with FI clamps, nut, bolts etc and making good disturbed surfaces, complete all as specified.
ARTI ENTERPRISES
M/S SAMRAT TRADING AGENCY
Anjali Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .