REPAIR OR MAINTENANCE OF DG SET, AMF PANEL, OTHER EM EQPTS AND REPAIR AND MAINTENANCE OF LT CABLE, EXTERNAL ELECTRIC POWER TRANSMISSION SYSTEM AND ALLIED WORKS AT SITE R AFS STN UNDER GE(AF) THANE

Amount

Excavation in trenches, not exceeding 1.5m wide and n.exc 10 sqm on plan and n.exc 1.5m depth and getting out in hard/dense soil ,complete all as specified and as directed by Engr-in-charge.

Returning filling in including spreading levelling, watering & well ramming in layers not exceeding 25 cm in soil ,complete all as specified and as directed by Engr-in-charge.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 metre above the starting point ,complete all as specified and as directed by Engr-in-charge.

M&L for spreading in trenches fine dry river sand for cable protection and removing down getting by hand ,complete all as specified and as directed by Engr-in-charge.

Supply and laying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches ,complete all as specified and as directed by Engr-in-charge.

Relaying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches,complete all as specified and as directed by Engr-in-charge.Not: Old unserviciable PCC cover retrived from taking down shall be used against this item.

Taking out old unserviceable underground cable PVC insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade, fixed on pole, wall and trenches etc after disconnecting of any size including cable cover ,complete all as specified and as directed by Engr-in-charge.

Supply & laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric power cable with aluminum conductor, 1100 V grade, ,complete all as specified and as directed by Engr-in-charge. of the following sizes: Make:Polycab/Havells/CCI/Gloster/KEI

2 core x 10 Sqmm

4 core x 16 Sqmm

3½ core x 25 Sqmm

3½ core x 35 Sqmm

3½ core x 50 Sqmm

3½ core x 70 Sqmm

Supply & laying GI pipe light graded of size 25 mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection ,complete all as specified and as directed by Engr-in-charge.

Supply & laying GI pipe light graded of size 50 mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection ,complete all as specified and as directed by Engr-in-charge.

Supply & laying GI pipe light graded of size 80 mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection ,complete all as specified and as directed by Engr-in-charge.

Taking down Defective street light, flood light and bldg security light fitting of any Capacity and any watts, from their existing postion i.e. Poles and bldg and re-fix the same duely repaired i.e replacement of LED Driver, SPD, PVC wires etc complete all as specified and as directed by Engineer In Charge. Note: LED Driver, SPD, PVC wires and 3 core cable for replacement/repair shall be measured and paid separatly under relevent item of Sch A as a supply only.

Supply only Surge protection device (SPD) of capacity 8 KV with phase, neutral and earth wire in incoming and out going both sides ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply only Surge protection device (SPD) of capacity 5 KV with phase, neutral and earth wire in incoming and out going both sides ,,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply only LED driver 30/45 W LED Street light Fitiing ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply only LED driver 60 W LED Street light Fitiing ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply only LED driver 90 W LED Street light Fitiing ,complete all as specified and as directed by Engr-in-charge.Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply only LED driver 120/150 W LED Street light Fitiing complete all as specified and as directed.Make: Bajaj/Havells/Crompton/Shakti/Phillips

Supply, fixing and testing LED street light fitting of 60 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD (I) less than 10%, cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report. Make: Crompton, Havells, phillips, C&S, Bajaj, helonix, Wipro

S&F, LED aviation light 30 watt made in cast aluminium spigot housing with decorative opal acrylic diffuser with IP-65 protection complete all as specified and as directed by the Engr- in- Charge. Make: Crompton, Shakti, Havells, phillips, C&S, Bajaj,

S&F energy efficient square surface/ceiling mounted LED down 2x2 luminaire 34/36 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover ,complete all as specified and as directed by the Engr- in- Charge. Make: Crompton ,Havells, philips, C&S, Bajaj, helonix, Wipro

S&F energy efficient LED racces panel 12 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover , complete all as specified and as directed by the Engr- in- Charge. Make: Havells, Crompton , philips, C&S, Bajaj, helonix, Wipro

M & L for connecting 1100 volt grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tap and over all PVC sheathed in service connction for street light from FRP junction box to street light of size 3 core 1.5 Sqmm ,complete all as specified and as directed by the Engr- in- Charge. Make: Paragon/HPL/Havells

Providing and deployement of one Electrician with one helper for repair/replacement of unserviceable street light/ Gate lights/ post top lantern lights /Garden light/ building security light from the walls/Gates/Lamp posts for repairs and refixing the same in existing position including testing after repair ,complete all as specified and as directed by the Engr- in- Charge.Note: (a)Necessary spare,fitting,excavation other related work shall be measured in respective items. (b) Necessary tools,ladder ,safty equiptment for electrician and helper shall be arrange by the contractor in his own cost. (c) Taking down and refixing is also to be included in the quoted rate

Taking down carefully high mast light fittings from 20 mtr height pole by mechanically means including replacement of unserviceable parts with new ones and fixing the same its in original position with testing of all fittings and control gear box 09 Nos ,complete all as specified and as directed by Engr-in-charge. ( Spares parts/acessories shall be measured and paid seperately as supply only item) Note: high mast light fittings for replacement/repair shall be measured and paid separatly under relevent item of Sch A as a supply only.

M&L for Repairing of high mast light Panel including, digitial timer and contactor,and replacement of relay and rewiring with 1.5 sq mm with replacing of of 03 Nos of indicating lamp, etc all as directed.

Taking down unserviceable and dislocated conductor strip of any type from wall/floor/roof/ inter connection grid for of any size, complete all as specified and as directed

Refixing the old serviceable copper strip on the existing location after necessary repair ,complete all as specified and as directed. Note: Copper strip to be jointed through brazzing only.

S&F ,in repair, copper strip of 20x3.00 mm as roof conductor and down conductor till test point complete all as specified and as directed by Note:Copper strip to be jointed through brazzing only.

S&F,in repair,copper strip of 32x6.00 mm as roof conductor and down conductor till test point complete all as specified and as directed Note: Copper strip to be jointed through brazzing only

S&F,in repair, Aluminium strip of 25x3.00 mm as roof conductor and down conductor till test point complete all as specified and as directed Note -Aluminium strip to be jointed through brazzing only.

S&F,in repair, Aluminium strip on the existing location after necessary repair complete all as specified and as directed.Note-aluminium strip to be jointed through brazzing only.

S&F ,in repair, Porcealing insulators for fixing Copper strip on wall / Roof bldg with necessary screws washers and nut bolts etc all Specified . Note - Rates are inclusive of copper screws with washers for fixing copper strip on porciline insulator with minimum size 1 inch and maximum size 1.5 inch with max external dia of screw is 8mm and 2 nos of GI nut for fixing insulator on wall all as per site requirement, complete all as specified and as directed.

S&F ,in repair, single pointed soild copper rod 300mm long and 12mm dia fixed on suitable flat mounted plate and connected with roof/dowen conductor, complete all as specified and as directed.

S&F ,in repair,Medium grade GI pipe of 20 mm dia for fixing air termination rod, the pipe shall be suitably tapered for fixing the saddle insulator at an interval not exceeding 0.5 meter, the pipe should be laid vertically and should be properly supported, length of each vertically pipe should not exceed 3 RM, the air termination rod, down conductors should be insulated from the pipe, complete all as specified and as directed.

S&F ,in repair, terminal block made with gun metal size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head of gun metal screw ,complete all as specified and as directed.

Material and labour for earth pit chember of size 0.6mx0.6mx0.6m made with PCC 1:2:4 type B-2 including HDPE earthing pit cover inspection chember of size 200 mm depth, 300mm length and 300mm width, complete all as specified and as directed.

S&F Single phase KWh meter with 1P LCD 5-30 Amps with optical port, complete all as specified and as directed.

S&F ,in repair, rigid non metalic PVC conduit exclsive of boxes ( junction/terminal) but inclusive of all Tees / bends /elbowes/reducer/bell mouth tubes ends and fixing accessories coupler , lock nuts , saddles , pipe hook etc , complete all as specified and as directed.

S&F ,in repair,PVC cable with copper condcutor 1.5 sqmm Single core complete all as specified and as directed Make:Polycab/Havells/Kalinga/Anchor

M&L for applying two coat of Cement based paint on PCC poles of street lights of ant description up to including 9m overall length including preperation of old painted surface of PCC Poles, complete all as specified and as directed. Note: colour of paint as per decided by Engr in charge.

S&F Reflector adhishive tape 25 mm with suitable for fixing in street light pole, colour of paint as decided by Engr in charge.

Earthing complete with copper earth plate electrode of size 600 x 600 x 3 mm buried directly in ground (earthpit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to & including copper earth strip of size 20X3mm dia by means of GI bolts, nuts, washers, and connected to other end to main board duly protected by 15 mm bore GI light grade pipe from earth plate. Earth plate shall be surrounded by packed layer of coal dust 300mm and common salt 15 cm thick all around bottom and top. Watering pipe 20 mm bore of GI medium grade pipe and including funnel, wire mesh, CI cover & frame, PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 5 of SSR Part – I. Rate are deemed to include 7.5 Mtr 20X3mm size copper strip Note : PCC/HDPE chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii). Earth resistance of earth pit should be less than 2 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate. (iv) Soil registance test if required shall be the responsbility of contractor without any extra cost.

S&F ,in repair, street light timer analog type with 24 Hours operation settings including ML-4 contractor 63 Amps Three phase 430 volt AC with Control wiring of 6 Sqmm copper wire with TPN MCB of 63 Amps , 10 KA and 20 Amps single phase backlite fuse including sheet metal enclouser of 2mm thick with powder coating with mounting arrangements, angle iron frame and PCC foundation etc, complete all as specified and as directed

S&F security light bracket made with GI pipe 40 mm dia medium grade minium length 2 mtr long with 105 degree angle including necessary MS clamp made with 25mm x 5 mm and suitable MS studs and bolts complete all as specified and as directed by the Engr- in- Charge. Note: Rates are deemed to Including fixing clamp and anchor fasterner for GI steel tubing and red oxide with aluminium paint.

M & L for servicing and testing of APFC panel for proper functioning in manual & auto mode, re-wiring burnt out wires, replacing the wiring ducts/casing Capping and cleaning , and replaceing the unserviceable spares and testing, complete all as directed by Engineer-in-charge. NOTE :- Spares like power capacitors, load managers, push button, contactors, ammeter, voltmeter, MCBs shall be measured and paid seperatly under respective item of Sch 'A' Note: The servicing to be conducted in alternative at every six month.

S&F Naturally air cooled Double dielectric heavy duty 440 Volt 50 HZ Watt Less Power Capacitors wattage not more than 0.5 Watt per KVAR conforming to IS 13340 and 13341 ISI Marked and Conformiing to IEC 831-1 of rating capacity 10 KVAR ,complete all as directed by Engineer-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Simens

S&F Naturally air cooled Double dielectric heavy duty 440 Volt 50 HZ Watt Less Power Capacitors wattage not more than 0.5 Watt per KVAR conforming to IS 13340 and 13341 ISI Marked and Conformiing to IEC 831-1 of rating capacity 15 KVAR , complete all as directed by Engineer-in-charge .Make : Havells/L&T/Legrand/ Standered/schneider/Simens

S&F Naturally air cooled Double dielectric heavy duty 440 Volt 50 HZ Watt Less Power Capacitors wattage not more than 0.5 Watt per KVAR conforming to IS 13340 and 13341 ISI Marked and Conforming to IEC 831-1 of rating capacity 25 KVAR. , complete all as directed by Engineer-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Simens

M&L for Disconnectining the incomming and outgoing connections,taking out mannualy operated draw out type air circuit bracker of any type any make,3 pole 415 volt rating current up to 800Amps,including cleaning greasing all mechnical parts,replacement of defective accessories,and connection of all incomming and outgoing connection, complete all as directed by Engineer-in-charge. Note:-Accessories required for repair of ACB shall be measured and paid seperately in respective items of Sch A as a supply only.

S&F Auxilary cantact suitable for 630 Amps ACB , complete all as directed by Engineer-in-charge .Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Trip alarm contact suitable for 630 Amps ACB , complete all as directed by Engineer-in-charge.Make :CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Insulation barrier suitable for 630 Amps ACB , complete all as directed by Engineer-in-charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Earthfault release suitable for 630 Amps ACB , complete all as directed by Engineer-in-charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

Supply and fixing Racking Interlock suitable for 630 Amps ACB , complete all as directed by Engineer-in charge. Make:CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Extension Bar suitable for incomming and out going cable suitable for 630 Amps ACB .Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Mechnical lockable trip Push button kit suitable for 630 Amps ACB , complete all as directed by Engineer-in charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Locking of ACB in isolated position suitable for 630 Amps ACB , complete all as directed by Engineer-in charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Door interlock of ACB in any position suitable for 630 Amps ACB , complete all as directed by Engineer-in charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Vertical terminal adaptors for draw out power suitable for 630 Amps ACB , complete all as directed by Engineer-in charge. .Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Shunt Release suitable for 630 Amps ACB , complete all as directed by Engineer-in charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F Under voltage Release suitable for 630 Amps ACB , complete all as directed by Engineer-in charge.Make : CG/Havells/L&T/HPL/Simens/schneider/Standerd

S&F aluminum lugs suitable for Cable of size 10 Sqmm to 16 Sqmm , complete all as directed by Engineer-in charge..

S&F aluminum lugs suitable for Cable of size 25 Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 35 Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 50 Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 70 Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 95 Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 120Sqmm , complete all as directed by Engineer-in charge.

S&F aluminum lugs suitable for Cable of size 150Sqmm , complete all as directed by Engineer-in charge.

S&F,in repair, insulating rubber mating chequare plate made out having electrical resistance of size 1000mmx2000mm with thickness 20mm suitable for use 22 KV working voltage,dielectric strength 40 kv with working temperature up to 50 degree centrigate , complete all as directed by Engineer-in charge.

Material and labour for carrying out repair/maintenance through manufacturer or authorised service center of Auto servo control voltage stabilizer 300KVA capacity located at HQ area . (i)Opening of stabilizer and maintanance of spare parts,fixing of new/repaired parts after repair in place of defective parts,repairing the defective control system etc and assembling complet all as specified and directed. (i) Testing of stabilizer after repair on existing location to desired and rated output. Note:- Maintenance of defective parts and cost of labour for maintenance is deemed to be included in unit rate .

Supply only Synchronising motor low speed instant start,stop high torque input voltage 250 Volt single phase 50HZ,60RPM type of following capacity , complete all as directed by Engineer-in charge. ,Make:-AE,ME,Vintec

Supply only Crontol relay AC 230 Volt, 250 ohms, 1 pin with base plate 24V DC , complete all as directed by Engineer-in charge.. Make:-AE,ME,Vintec

Supply only Gunmetal brush assembly for 100 KVA stabilizer , complete all as directed by Engineer-in charge.Make:-AE,ME,Vintec

Supply only Variable voltage wound coil single phase , complete all as directed by Engineer-in charge.Make:-AE,ME,Vintec

S&F ,Single core copper conductor flame retardant PVC insulated(Unsheathed),1000 volts of size 6 sqmm suitable for Panel wiring. Make:- Havells,HPL,Polycab,Anchor

Disconnecting the incomming and out going cable connection from unserviceable indoor,outdoot LT panel. Dismelting the all MCCB, and other control equiptment, Measuring instrutment, Bus bar and internal cable /copper strip connection. Cutting the worn out sheet/angle and fabricated the new MS sheet/angle with match the existing size and shape. Scrapping the existing paint and repainting painting of the panel board with one coat of red oxide paint as a primer with two coat of synthetic enamel paint to match the existing colour.Refxing the serviceable controll equiptments and connected all incomming/outgoing cables , complete all as directed by Engineer-in charge. Note: (a)The Spares/parts required for replacement of the unserviceable items and frame work shall be measured and paid seperately in respective items.

Supply only MCCB 4 TP 40/63 A , 415 V, 50Hz having breaking capacity 36 KA with adjustable thermal & magnetic settingcomplete all as specified and as directed. Make: Indoasian/Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Supply only MCCB TP 100-125 A , 415 V, 50Hz having breaking capacity 36 KA with adjustable thermal & magnetic setting complete all as spd and directed by Engg.in.Charge. Make: Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Supply only MCCB 4 pole 160 A , 415 V, 50Hz having breaking capacity 36 KA with adjustable thermal & magnetic settingcomplete all as specified and as directed. Make: Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Supply only MCCB 4 pole 200 A , 415 V, 50Hz having breaking capacity 36 KA with adjustable thermal & magnetic setting complete all as specified and as directed. Make: Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Supply only MCCB 4 pole 250 A , 415 V, 50Hz having breaking capacity 35 KA with adjustable thermal & magnetic setting complete all as specified and as directed. Make: Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Supply only MCCB 4 pole 400 A , 415 V, 50Hz having breaking capacity 35 KA with adjustable thermal & magnetic setting complete acomplete all as specified and as directed. Make: Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Taking down the unserviceable Power contractor, Supply and fixing 4 pole Power contractor type MCX,AC-1,rating 63 Amps,ML-4 including necessary connection complete all as specified and as directed. Make:-Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

Taking down the unserviceable Power contractor, Supply and fixing 4 pole Power contractor type MCX,AC-1,rating 45 Amps,ML-3 including necessary connection complete all as specified and as directed. Make:-Indoasian /Havells/HPL/BENLO/L&T/Standred/Legrand/ABB/Schneider

M&L for periodical testing and measuring the earth resistance value of the existing earthings / Down conductor / air terminal by means of wheat stone bridge method after disconnecting the earth continuity conductor from the test point , applying secondary voltage across the terminals, maintaining proper record of the measurement in presence of the users rep, MES rep, submitting the test records, pouring saline water in the earth pit to achieve low earth resistance, observing the same complete for monthly/Quarterly/Half yearly L2/L3 eqpts/E&M installations/Lightning arresters test complete all as specified and as directed.

Supply, perform, testing, commissioning of LT cable straight through joint kit heat shrinkable of 4 core x 10/16/25 Sqmm size, complete all as specified and as directed. Make : Denson / M seal

Supply, perform, testing, commissioning of LT cable straight through joint kit heat shrinkable of 3.5 core x 35/50 Sqmm size, complete all as specified.Make : Denson / M seal

Supply, perform, testing, commissioning of LT cable straight through joint kit heat shrinkable of 3.5 core x 70/95 Sqmm size all as specified and as directed. Make : Denson / M seal

Material & labour for cement concreate for coping for poles 1:2:4, type B1 by using 20mm graded aggreegate, complete all as specified and as directed.

S&F Prestressed concrete pole, 9.0 metres long, 102mm x 152mm at top and 102mm x 289mm at bottom, class 10, over all weight of 670Kg, uitimate strenghth of 145 Kgs/mm , complete all as specified and as directed by the Engr- in- Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation of poles/struts etc complete all as specified and directed.

S&F ,in repair ,Starter 25 HP, 18.5 KW, star delta relay range 14-23 A, 415V, 50Hz, available starting current: 33% of full load current, peak starting current: 1.3 to 2.6 full load current, peak starting torque 33% full load torque , complete all as specified and as directed.

S&F ,in repair , change over switch & disconnectors 100 Amps, 4 pole, 415V, 50Hz, staggered terminals site convertible dual shaft position all as specified and as directed.

M&L for Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 100 KVA Make : Cromptom Greaves/GE/Cumins/Kirloskar Green complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement shall be measured and paid separetely under appropriate items mentioned in Sch 'A' as a supply only.

Supply only spare parts of DG Set model Make – Cromptom Greaves/GE/Cumins/Kirloskar Green of capacity 100KVA for replacing of unserviceable parts for satisfactory functioning of engine complete all as directed by Engr-in-Charge.of the following:-

Fuel filter element with existing cat part (primary & secondry) .Make:Kirloskar/Bosch/Mico

Lube oil filter element with existing cat part. Make:Kirloskar/Bosch/Mico

Radiator hose pipe set with clamp complete.Make:Kirloskar/Bosch/Mico

Water temperature guage with existing cat part. Make:Kirloskar/Bosch/Mico

Oil temperature guage with existing cat part. Make:Kirloskar/Bosch/Mico

Oil pressure gauge with existing cat part. Make:Kirloskar/Bosch/Mico

Fan belt se with existing cat partt. Make:Kirloskar/Bosch/Mico

Starting ignition switch with existing cat part. Make:Kirloskar/Bosch/Mico

Push Button with existing cat part. Make:Kirloskar/Bosch/Mico

Packing Kit with existing cat part. Make:Kirloskar/Bosch/Mico

Techometer with cable with existing cat part. Make:Kirloskar/Bosch/Mico

Fuel pipe any type length and specification with existing cat part. Make:Kirloskar/Bosch/Mico

Air filter element of existing specification with existing cat part. Make:Kirloskar/Bosch/Mico

Battery charging meter 12 VDC.Make:Kirloskar/Bosch/Mico

Hose pipe (for make up water connect).Make:Kirloskar/Bosch/Mico

Hose thermostate to radiator.Make:Kirloskar/Bosch/Mico

11.5" dry type air cleaner.Make:Kirloskar/Bosch/Mico

Digital voltmeter 0-500V with existing cat part. Make; HPL or equivalent to ISI as approved By GE

Digital ammeter 0- 100 A with existing cat part . Make; HPL or equivalent to ISI as approved By GE

Digital frequency meter 50HZ with existing cat part. Make; HPL or equivalent to ISI as approved By GE

M&L for Sevicing, repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 82.5 KVA Make :Cromptom Greaves/GE/Cumins/Kirloskar Green complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement shall be measured and paid separetely under appropriate items mentioned in Sch 'A' as a supply only

Supply only spare parts of DG Set model Make – Cromptom Greaves/GE/Cumins/Kirloskar Green of capacity 82.5 KVA for replacing of unserviceable parts for satisfactory functioning of engine complete all as directed by Engr-in-Charge.Of the following:-

Fuel filter element (primary & secondry).Make:Kirloskar/Bosch/Mico

Lube oil filter element.Make:Kirloskar/Bosch/Mico

Radiator hose pipe set with clamp complete.Make:Kirloskar/Bosch/Mico

Water temperature guage.Make:Kirloskar/Bosch/Mico

Oil temperature guageMake:Kirloskar/Bosch/Mico

Oil pressure gauge.Make:Kirloskar/Bosch/Mico

Fan belt set.Make:Kirloskar/Bosch/Mico

Starting ignition switch.Make:Kirloskar/Bosch/Mico

Push Button.Make:Kirloskar/Bosch/Mico

Packing Kit.Make:Kirloskar/Bosch/Mico

Techometer with cable.Make:Kirloskar/Bosch/Mico

Air filter element of existing specification.Make:Kirloskar/Bosch/Mico

Hose thermostate to rediator.Make:Kirloskar/Bosch/Mico

11.5" dry type air cleaner Make:Kirloskar/Bosch/Mico

Digital voltmeter 0-500V .Make: HPL or equivalent to ISI as approved By GE

Digital ammeter 0- 100 A. Make: HPL or equivalent to ISI as approved By GE

Digital frequency meter 50HZ Make: HPL or equivalent to ISI as approved By GE

M&L for Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 50KVA Make : Cromptom Greaves/GE/Cumins/Kirloskar Green complete to entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement in shall be measured and paid separetely under appropriate items mentioned in Sch 'A' as a supply only.

Supply only spare parts of DG Set model Make – Cromptom Greaves/GE/Cumins/Kirloskar Green of capacity 50 KVA for replacing of unserviceable parts for satisfactory functioning of engine complete all as directed by Engr-in-Charge.of the following:-

Fuel filter element (primary & secondry).Make:Kirloskar/Bosch/Mico

By pass filter element.Make:Kirloskar/Bosch/Mico

Water temperature guage.Make:Kirloskar/Bosch/Mico

Oil pressure gauge.Make:Kirloskar/Bosch/Mico

Fan belt set.Make:Kirloskar/Bosch/Mico

Shut down valve.Make:Kirloskar/Bosch/Mico

Starting ignition switch.Make:Kirloskar/Bosch/Mico

Push Button LED type.Make:Kirloskar/Bosch/Mico

Fuel pipe any type length and specification.Make:Kirloskar/Bosch/Mico

Air filter element of existing specification.Make:Kirloskar/Bosch/Mico

M&L for Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 15 KVA Make : Cromptom Greaves/GE/Cumins/Kirloskar Green,complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement in shall be measured and paid separetely under appropriate items mentioned in Sch 'A' as a supply only.

Supply only spare parts of DG Set model Make – Cromptom Greaves/GE/Cumins/Kirloskar Green of capacity 15 KVA for replacing of unserviceable parts for satisfactory functioning of engine complete all as directed by Engr-in-Charge.of the followng:-

Fuel filter element (primary & secondry).Make:Kirloskar/Bosch/Mico

By pass filter element.Make:Kirloskar/Bosch/Mico

Water temperature guage.Make:Kirloskar/Bosch/Mico

Oil pressure gauge.Make:Kirloskar/Bosch/Mico

Fan belt set.Make:Kirloskar/Bosch/Mico

Fuel pipe any type length and specification.Make:Kirloskar/Bosch/Mico

Air filter element of existing specification.Make:Kirloskar/Bosch/Mico

Supply only Engine oil 20W40 Suitable for DG Set Complete all as spd.Make:Servo

Supply only Coolent AFC 30% Suitable for DG Set Complete all as spd.Make:Servo

M&L for Repair/overhauling and calibration of fuel injection pump complete with replacement of worn out parts such as bearing plunger, impeller and oil seal etc including re-fixing fuel injector pump all as directed.

S&F ,in repair, radiator opening of inlet outlet hose connection including cleaning of complete radiator and repair if any leakage by soldering welding and refitting testing of 100/62.5/15KVA capacity Diesel engine, complete all as specified and directed by Engr-in-Charge

M&L for Repair / calibration of nozzle assembly replacement of worn out parts injector top, springs etc all as specified and directed by Engr-in-Charge.

M&L for Repair of self starter including replacemet of burn field coil replacement of armature and carbon boush holder and carbon bush point of any capacity and of DG set ,complete all as specified and directed by Engg.in.Charge

M&L for Dismantling of alternator parts of DG set 100 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. Rewinding of stator field, replacement of exciter assembly and automatic voltage regulator, varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete all as spd and directed by Engg.in.Charge

M&L for Dismantling of alternator parts of DG set 62.5 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. Rewinding of stator field, replacement of exciter assembly and automatic voltage regulator, varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete all as spd and directed by Engg.in.Charge

M&L for Dismantling of alternator parts of DG set 50 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. Rewinding of stator field,replacement of exciter assembly and automatic voltage regulator,varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete all as spd and directed by Engg.in.Charge

M&L for Dismantling of alternator parts of DG set 15 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. Rewinding of stator field,replacement of exciter assembly and automatic voltage regulator,varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete all as specified and directed by Engg.in.Charge

M&L for Dismantling of Engine/alternator parts of DG set 50 KVA 3 phase 4 wire, AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan, radiator, fuel assy, injector, flywheel assy, cranc, piston assy reassembling of complete parts of engine side and complete parts of alternator side all as spd and directed by Engg.in.Charge. Note:- Rates are deemed to include small spares such as nut, bolt, washers packing etc.

Supply, Fixing, Testing AVR for DG Set 100 KVA, 3 phase 4 wire, AC 415 Volts, 50Hz to sense the voltage in the main generator winding and control the power fed to the excider startor and the main rotor to maintain the generator output voltage with in the specified limits, compensating for load, speed, tempreture and power factor including taking down of old unserviciable spare/parts ,complete with existing make & specification all as specified and directed by Engg.in.Charge.

S&F DG Set power bank of capacity 12 Volts, 180 Ah complete with autobat invatower heat sealed low maintenance battery made with low antimony selenium alloy (LASA) in positive and negative elctrodes,Instant cranking,high density with extreme power with and including polyethylene envelope separators with glass mat vibration resistant for longer life complete all as spd and directed by Engg.in.Charge.Make: Exide gen plus/Okaya/Luminous

S&F DG Set power bank of capacity 12 Volts, 88 Ah complete with autobat invatower heat sealed low maintenance battery made with low antimony selenium alloy (LASA) in positive and negative elctrodes,Instant cranking,high density with extreme power with and including polyethylene envelope separators with glass mat vibration resistant for longer life complete all as spd and directed by Engg.in.Charge.Make: Exide gen plus/Okaya/Luminous

AMC FOR DG set 100 KVA, Make: Kirlosker through authorise service agency of OEM. Location: AFS HQ Area. Scope Of Work :- (a) Engine Cooling System :- Checking of radiator ,V belts, enging oil,hoses connections , fan pulley, water pump,vibration of engine, belts tension,water level sensor and necessary rectify the defect if found. (b) Engine Fuel System :-Checking fuel lines connections,piping, clamps, hose, etc.governors ,electronic governing system,priming pump,fuel filter and necessary rectify the defect if found. ( c) Engine Lubricating System Inspection :-Checking oil lines connections and rectify any signs of oil leak, loose connections, corroded piping, defective clamps, deteriorated hose, etc.Checking oil pressure condition and rectify any sign of erratic operation, defective gauges, defective pressure sensors, defective wiring harness, etc.Checking oil level & oil quality condition.Checking oil condition . (d) Engine Air Induction System :-Checking air filter indicator reading and repair/replace defective sensor, air filter,.Checking hoses & connections (e) Engine Exhaust System :-Checking the exhaust manifold condition,exhaust pipe insulation if found any abnormal then rectify according. (f) Engine Electrical System :-Checking batteries condition,electrolyte level, distilled water level. (g) Generator Control Panel System Inspection :- Checking “start / stop / manual switch condition & functionality.Checking “voltmeter”, “Ammeter”, “frequency meter, “Contactors,“wiring termination for proper tightness, indicating lamps, fault/tripping circuits and necessary rectify the defect if found. (h) AMF Panel :- Checking the all connection of contractor, MCCB, cable connection and rectify the defect if found any. NOTE:- any spare parts required for maintanence shall be measured and paid seperately in respectively items.

All as per item No-162 above but for 100 KVA Make cummins, Location: pump house No-1 Site R

All as per item No-162 above but for 62.5 KVA Make:kirloskar, Location : MTS Site R Technical area

All as per item No- 162 above but for 50 KVA Make: cummins ,Location Site R

All as per item No-162 above but for 15 KVA Make: Kirloskar ,Location AFNET Site R

S&F electric contactor suitable for AMF panel of DG Set 100 KVA, 3 phase 4 wire, AC 415 Volts, 50Hz as existing make and capacity all as directed and specified and directed by engr-in-Charge.

S&F electric contactor suitable for AMF panel of DG Set 100 KVA, 3 phase 4 wire, AC 415 Volts, 50Hz as existing make and capacity all as directed and specified and directed by engr-in-Charge.

Material and Labour for power contactor 3 pole capacitor duty contractor, dust cover with auxillary contactor for 10 KVAR rating long life for capacitor bank, fixed in repairs, complete all as directed by Engineer-in-charge. Make : C & S/Havells/L&T

Material and Labour for power contactor 3 pole capacitor duty contractor, dust cover with auxillary contactor for 20 KVAR rating long life for capacitor bank, fixed in repairs, complete all as directed by Engineer-in-charge. Make : C & S/Havells/L&T

Material and Labour for power contactor 3 pole capacitor duty contractor, dust cover with auxillary contactor for 25 KVAR rating long life for capacitor bank, fixed in repairs, complete all as directed by Engineer-in-charge. Make : C & S/Havells/L&T

Taking down unserviceable change over switch and Supply and fixing on load change over switch 200 amps, 415 volt AC, complete all as directed.

Atharva Enterprises

EVEREST POWER CONTROL ENGINEERS

PURVA ELECTRICALS AND ENGINEERS