SPECIAL REPAIR TO ROOF AND FALSE CEILING INCLUDING MISCELLANEOUS CONNECTED WORKS TO BLDG NO SL-07 (ORs LIVING) AND RIASE-06 (MES STORE) AT MILITARY STATION MOUNT ABU

Amount

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

Supply and fixing Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Supply and fixing Clay burnt ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

Material & labour for second class hardwood (SAL) scantling clean swan in unframed work as in rafters, purlins & trusses etc all as specified and directed complete.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Supply and fixing galvanised 0.63 mm thick corrugated mild steel sheeting class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs coering

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

Supply and fixing 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Material & labour for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc.

Material & labour rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc.

Material & labour 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement.

Material & labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in fdn, surface channel,cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board Everset white water proof ceiling board incl applied one coat of acrylic emulsion paint to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Supply and fixing in repair of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertaure 1.4 mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frame etc complete.

Demolition of cement concrete of any description and in any position not otherwise specifically provided.

Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) laid in alternate bays as in plinth protection incuding finished the surface even and fair without using extra cement complete all as specified and directed.

M & for 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) laid as in flooring finsihed even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls complete all as specified and directed.

Material & labour two coats of oil bound distemper (acrylic) white or tinted over and including 2mm thick wall care putty including preparation of new or old plastered surfaces of walls etc.

Material and labour for preparation of newly/old plastered surface of wall and applying two coats of Weather coat incl 2mm thk wall care putty complete all as specified.

Material & labour two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete.

Material & labour two coat of synthetic enamel paint over old/new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte.

Preparation of surfaces of roof tiles any pattern by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots, cleaning with water etc. and applying two coats Indigo roof tiles coat premium series over a coat of primer complete all as specified and directed.

Supply and fixing in repair of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertaure 1.4 mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frame etc complete.

Material & labour for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm in width or girth including preparation or surfaces complete.

Taking down shutter (mosquito proof) from the frame, any description exceeding 1.00 sqm but n.exceeding 2.00 sqm each including removing from site.

Taking down wooden frame with shutter without taking off shutter from the frame exceeding 1.5 sqm each but n-exceeding 4 sqm each including removing from site.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and re-fixing in the same opening after repaired as directed.

Material & labour IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete.

Supply and fixing of 35 mm thick, factory made, gauged and skeleton shutters from 2nd class hardwood (hollock), open rebated, prepared to receive gauge, glass etc (without sash bars), edges of framing plain, chaimfered or rounded, fitted with cut & mitred beads for securing glass, guage etc, size of members of shutters as specified in SSR Part-I, members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

Supply and fixing of plain framed panelled factory made shutter (any number of panels) 35 mm thick of 2nd class hard wood (hollock) (botonical name terminalia myrio carpa) for rails and styles kiln seasoned (as per IS-1141) & chemically treated as per IS- 401 and panels of 9mm thick BWP marine grade plywood bounded with high quality liquid phenol, formaldehyde, commercial both face, (the over all door shutter shell conform to IS-1003)(Part-I) and complete all as specified.

Supply and fixing of MS butt hinges, medium weight, cold rolled of size 100 mm.

Supply and fixing aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

Supply and fixing aluminium anodised barrel tower bolt of extruded section 200 mm long.

Supply and fixing 150 mm size aluminium handles, cast type anodised.

Taking out unserviceable double action spring hinge from door shutter and supply and fixing of new MS double action spring hinge, 125mm size with steel wire spring, stove enamelled black fixed to metal door frame by welding complete as directed.

Supply & fixed steel windows/ventilators box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ/TD/20 sheet 1/3 to 3/3 and CEJZ/TD/24 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Supply and fixing 3mm thick sheet glass, plain or tinted ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane

Material and labour for 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20 mm thick in CM 1:6 complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

Material & labour for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sq mm complete all as specified and directed by Engr-in-Charge :-

One light point controlled by one switch one way

One fan/exhaust fan point controlled by one switch one way

One socket out let 5 Amps 5 pin on independent board

One socket out let 5 Amps 5 Pin on same board with other switch

All as per item No 2 here in before but with cable size 2.5 Sqmm for one 3/5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 1.0 Sq mm all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano flush type 5 Amps single pole one way. Make:Cona/Anchor/Havells

Supply and fixing socket out let 3 pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply and fixing switch socket combination 2 in 1, multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply and fixing switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

Supply and fixing Ceilling rose on PVC board size 65 X 50 mm three terminal Complete. Make:Cona/Anchor/Havells

Supply and fixing Angle holder backelite complete all as specified.Make:Anchor/ Philips/Cona

Supply and fixing fan regulator electronic step type, 230 volt , 50 Hz complete all as specified. Make:Cona/Anchor/Havells

Material & labour for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered) 1x2.5 sqmm copper conductor wire as earth continuity in PVC counduit all as directed.

Supply and fixing MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified. Make Havells/ Legrand/L&T.

Supply and fixing MCB DB TPN 04 way (double door) 415 Volt with 200 Amps rated bas bar, neutral link, earth bar and Din rail 240 Volt complete all as specified. Make Havells/ Legrand/L&T.

Supply and fixing MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply and fixing MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply and fixing MCB triple pole and neutral, Curve 'C' 240 volts 40 to 100 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply and fixing LED LED light fittings 1x18 watt, 220 volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductore cable of suitable size from ceiling rose complete.

Hanging/fixing of ceiling Fan and connectiong up including provision of cable from ceiling rose or connector to fan.

Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schdule part-I and testing after completion

shree nathji trading corporation

Haritwal traders