Repairing and relaying of bituminous road surface between Gate no-1 and 2 along the MES AGE Office and Sparsh centre, road between cycle shed near Gate no-2 and no-6 along the outside perimeter wall at GSF, Cossipore.

Amount

Demolition of brickwork built in cement mortar.

M&L for Brickwork with sub class 'B' bricks in 1:4 cement mortar

M&L for doing PCC with 12.50 mm stone chips@ 1:2:4 nominal mix.(brand of cement: Ambuja, Ultratech, ACC or equivalent)

M&L for RCC @ 1:2:4 with 20mm graded aggregate in Slabs supported on walls etc.(Brand of cement: Ambuja, Ultratech,ACC or equivalent)

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape, binding with mild steel wire not less than 0.9 mm dia in RCC work.

M & L for making wooden formwork for RCC and fair finish.

M & L for 15 mm thick 1:4 ratio new cement plaster.

Labour only for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M & L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq mtr including heating the bitumen. Spraying the bitumen.

M&L for Bituminous premixed carpet, 2cm consolidated thickness with 0.27 cum of stone chipping mixed with 14.6 kg of bituminous binder(VG-10 grade), rolled and compacted to required camber and gradient.

Premixed sand seal coat with 0.06 cum of sand mixed with 6.8 kg of bitumen(VG-10 grade), applied and rolled to uniform smooth surface.

Removing the demolished building materials outside the factory premises.

CHARIOT CONSTRUCTION

M/S. BASU ENTERPRISE

Indra Engineers