REPAIR MAINT OF CERTAIN BR WORK LIKE PLASTERING TILING KTICHEN PLATFORM SANITARY FITTINGS AND OTHER MISC WORKS AT RASHI AREA UNDER AGE BR II NW NAVY NAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over and including 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

M&L non-skid coloured Ceramic tiles 400x400x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified.

S&F in repair Plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminisied hinges devices complete all as specified and directed.

S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size incl angle iron brackets with painting of brackets etc complete all as specified and directed .

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed

S&F in repair 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

M & L for 32mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and directed by Engr in Charge..

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density for low level cistern.

S&F stainless steel tubular towel rail 20mm dia D type 60cm long between flanges all complete as directed.

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

S& F in repair vitreous china wash down water closet padestal pattern (Anglo-Indian type) white (excluding fixing bolts, flushing cistren and flush pipe) with 'P' or 'S' trap complete all as specified supplied and fixed in repairs.

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M & L Prepration of new plastered surfaces of walls, pillars, cornices and applying two coats oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed.

S&F 150 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 100 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F in repairs 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F in repairs 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

S&F in repairs hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed.

All as per Item No 30 above but exc 1.5 sqm but n exc 4 sqm each all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80x66mm aperture) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

S&F in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as end block, rounded block, brackets, CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description n exc 1 sqm each.

All as per Item No 42 above exc 1 sqm but not exc 2 sqm each

S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC.

S&F 100 mm extruded aluminium handles, fabricated type anodised fixed complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed complete all as specified and directed.

S&F 75mm stailess steel medium weight butt hinges complete all as specified and directed.

S&F 150 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge all as specified and directed.

S&F hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

S&F 100mm size mild steel medium weight butt hinges all as specified and directed.

M&L for two coats synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including preparation of surface complete all as specified and directed

S & F Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wasters, including bedding in cement mortar to dwarf walll or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460 mm bowl sie 410mm x 330 mm x 160mm complete all as specifice and directed.

S&F in repair fancy type cromium plated stop valves of 15mm bore, with cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed cmplete all as specified and directed.

S&F in repair 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed cmplete all as specified and directed.

Taking up or down GI tubing 15mm bore and connections all as directed.

S&F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors.

SRI SAIRAM COUNSTRUCTION (BID ID -3067253)

MAHABIR INDUSTRIAL PRODUCTS (INDIA) (BID ID -3067715)

SAHU AND SAHU CO. (BID ID -3067566)

SHREE JAGDISH FURNITURE CO. (BID ID -3063077)