Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹90.1 LAccepted-AOC | L1 | Accepted-AOC lowest bidder | |
| 2 | L2₹100.0 L+₹9.9 L (11.0%)Rejected-AOC PLOT NO 52 BAKSHI NAGAR JAMMU 180001 J K | JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | L2 | Rejected-AOC other than lowest bidder | |
| 3 | L3₹1.1 Cr+₹20.0 L (22.2%)Rejected-AOC | L3 | Rejected-AOC other than lowest bidder | |
| 4 | L4₹1.2 Cr+₹25.2 L (27.9%)Rejected-AOC | L4 | Rejected-AOC other than lowest bidder |
Tender Value
₹96.5 L
EMD Value
₹1.7 L
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE Rajouri PIN-900129 C/o 56 APO
PROVN OF UNDERGROUND OPERATIONS ROOM AND SAND MODEL ROOM AT NAUSHERA UNDER GE 862 EWS.
2022_MES_549743_1
CANO-CWE/RAJ-44/2022-23
Open Tender
Civil Works
Lump-sum
660 days
Naushera under AOR of GE 862 EWS
Class C category a(i)
9 documents required · 9 mandatory
₹1,000
GE 862 EWS
₹1.7 L
Yes
9 Dec 2022
3 Sept 2022
21 Oct 2022
3 Sept 2022
14 Oct 2022
30 Sept 2022
Amount
Schedule 'A' Part-I (Building supply Work)
Total amount of Sch 'A' Part-I (Building work) brought forward from srl page No-21.
Schedule 'A' Part-II (Internal electrification works)
Total amount of Sch 'A' Part-II (Internal electrification works) brought forward from srl page No-23(R)
Schedule 'A' Part-III (Road/path/hardstanding Works)
Total amount of Sch 'A' Part-III(Road/path/hardstanding Works) brought forward from srl page No-24
Schedule 'A' Part-IV (Area drainage Works)
Total amount of Sch 'A' Part-IV(Area drainage Works) brought forward from srl page No-26
Schedule 'A' Part-V (Additional bldg Works)
Total amount of Sch 'A' Part-V(Additional bldg Works) brought forward from srl page No-27(R)
Schedule 'A' Part-VI (Site clearance Works)
Total amount of Sch 'A' Part-VI(Site clearance Works) brought forward from srl page No-28
Schedule 'A' Part-VII (Air condition Works)
Total amount of Sch 'A' Part-VII(Air condition Works) brought forward from srl page No-29(R)
Schedule 'A' Part-VIII (Geyser Works)
Total amount of Sch 'A' Part-VIII(Geyser Works) brought forward from srl page No-30(R)
Schedule 'A' Part-IX (External water supply Works)
Total amount of Sch 'A' Part-IX(External water supply Works) brought forward from srl page No-31
Schedule 'A' Part-X (External electric supply supply Works)
Total amount of Sch 'A' Part-IX(External electric supply supply Works) brought forward from srl page No-33
Schedule 'A'Part-XI (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Supply , install, testing and commissioning of factory made and tested indoor type wall mounted LT panel board cubicle type suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with air insulated PVC sleeved copper bus bar of rating 200 Amps for phases and neutral installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2.0 mm CRCA sheet and 40 X 40 X 6 mm thick MS angle iron frame work front and rear side opening type of adequate size for housing LT switchgear and measuring instruments duly powder coated after seven tank process on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size but not less than 4.0 sq mm and comprising of followings item:-
Supplying, installing, testing & commissioning of factory assembled Diesel Engine driven generating set coupled with alternator AC to give continuous output of 15 KVA/12KW at a power factor of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, directly coupled with diesel engine, Air cooled, mounted on common base frame complete with in built fuel tank (service tank) of adequate capacity with fuel line, built in electronic governor & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, micro processed based relay panel for automatic starting on mains failure, control panel showing all parameters of engine & alternator, sound proof canopy & other accessories etc. and confirming to the under-mentioned technical specifications confirming to BS:5514 & IS 10000 complete in all respect with following accessories, parts all as specified & directed. Make:M/S Kirloskar GEN Set model No- KG1-15AS and equivalent in Cummins/Ashok Leyland
(a) DIESEL ENGINE : 2 cylinders , turbo charged air cooled at 1500 RPM under NTP conditions IS 4722, BS 5000, IEC 3411, ISO 8528, BS 5514, ISO 3046, conforming to with an overload capacity of 10% for one hour in 12 hrs of continuous operation with the following accessories Make:M/S Kirloskar Engine model No- HA294 G1 (CPCB Norms Compliance ) and equivalent in Cummins/Ashok Leyland (i) Radiator with blower fan or heat exchanger with guard . (ii) Pipe coupling for engine cooling system piping (iii) Corrosion inhibitor coolant (iv) Paper element filters-(i) Fuel (ii) Lube oil (iii) By Pass (vi) Fly wheel housing and fly wheel to suit (vii) Engine bearing mechanism in fly wheel housing (viii) shut off coil with safety for LLOP /HWT./ Over speed. (ix) Dry type air cleaners and vacuum indicators . (x) Residential silencers. (xi) Stainless steel exhaust flexible bellows. (xii) Motor driven priming pump. (xiii) Electric starter. (xiv) Battery charging alternator.
(xv) Exhaust piping made out of STIC C class MS Pipe inclusive of all accessories and hardware , necessary support as per manufacturer’s recommendations to sustain back pressure with rain cap (xvi) Mineral wool insulation 2 inch thick covered with aluminium sheets of 30 gauges for the entire length of exhaust pipe. (xvii) First fill of oil coolant and diesel during commission and 12 hours testing. (xviii) Interconnecting copper cabling of adequate capacity between batteries and controller. (xix) Fuel pipe. Fuel Tank_ 8 hours full load diesel storage capacity inbuilt fuel tank with mounting brackets factory fabricated made of MS sheet with level indicator fuel inlet , fuel outlet , air vent, drain plug,inlet arrangement filling from exterior of canopy etc. (t) Battery :- 120 AH,12 Volts maintenance free battery of Qty-1 Nos with leads and terminal. Make-Exide/Amaron/Amco (xx) PCC Foundation :- Civil work and PCC foundation for installation DG Set as per manufacturers instruction.
(b) ALTRERNATOR : 15 KVA/12 KW at 0.8 PF lagging, 415 volts, 3 Phase, 4 wire, 50 Hz at 1500 RPM self excited and self regulated with AVR brushless excitation band of voltage ± 1% of rated voltage from no load to full load insulation class H, IP-23 self ventilated and conforming to IS4722, BS5000, IEC 34/1, ISO 8528, BS5514, ISO3046, suitable for above mentioned diesel engine complete all as specified and directed . (c) ACOUSTIC ENCLOSURE : Factory made acoustic enclosure (canopy) having size not less than 1740mm lengthX1050mm widthX1474 mm height for the above 15 KVA DG set to reduce noise level to 75 db (A), measured at 1.00, meter distance @75% load auditable frequencies as per guidelines of CPCB & comprising of following-: (i) Sound proof insulation 100mm thick Rock wool (Density 65 Kg/cum) (ii) Outer body: Not less than 1.6 mm thick CRCA. (iii) Door 1.6 mm thick CRCA (iv) Inner surface: 1.0 mm thick powder coated & perforated CRCA / GI sheet (v) Common base frame: ISMC 250
Supply and fix copper wound Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170-260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed by Engr-In-Charge.
Supply and fix copper wound Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170-260 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified and directed by Engr-In-Charge.
Supply and install hi wall split Air condition units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.0 TR Hot & Cold, complete all as specified.
Supply and install hi wall split Air condition units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR Hot & Cold, complete all as specified.
Decorative Tube light fitting LED 20W tube Rod made out of basic all purpose surface and wall mounted LED batten with aluminum housing & integrated electronic driver. complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. Make:-Havells Cat Part No:-LUMILINEPLUSBS20WLED865SPCSS or Equivalent cat part of make as specified in list of make.
Surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. with & including 10W LED lamp and making connection with copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. Make: Havells Cat Part No HEXAFT10WLED857SSYMBOPC or Equivalent cat part of make as specified in list of make.
LED street light fittings 25W made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete with hosing with all accessories pre wired with and including 32mm dia GI pipe bracket of 1.2 mtr made to shape as required fixed on wall or pole with FI clamp of required shap & 40x6mm siize, nut, bolts, washers and making connection with three core copper flexible cable of suitable size to light fitting fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:-ENDURAPEARLSL25WLED757SASYTOPCMP orEquivalent cat part of make as specified in list of make.
S & F of 4 mm thick ceiling board ( Make "Everest Hill and Lake Pattern) in ceiling fixed with screw as per manufactures instructions laid over and including hot dipped galvanised iron in post grid with 24 mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprises of main runner fom 0.33 mm thick galvanised steel sheet of size 24x32x300mm specified at 12 mm centres securely fixed on the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjustment wall flush fitting of 1200 mm long screws tee with (double stiching) to interlocked between main runners of 600 mm centres to from 1200x 300 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19x19 mm and 300 mm long of white colour as per instruction complete all as specified and as directed.
M/S Jasbir Singh
RAJINDER CHOUDHARY
Ankit Sagar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .