Construction of VAO office Building in Irumbuliyur Tamil Poonga Street Ward - 60 at Tambaram city Municipal Corporation

Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton soil murrums hard red earth hard gravelly soil etc complete

Foundation

Grade Beam

Supplying and filling in foundation and basement with filling Crusher stone dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Reinforced cement concrete 1:1,5:3 mix using 20 mm HBG ISS metal with including cost and conveyance of all materials and including all labour charges etc complete

Supply and fabrication of steel using TMT & RTS bars with including cost and conveyance of all materials and including all labour charges etc complete

Providing centering and shuttering works using MS sheet moulds and soffits with including cost and conveyance of all materials and including all labour charges etc complete

Column

Grade Beam

Plain Surface

Brick work in CM 1:5 (one cement & five sand) using II nd class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing,etc., complete complying with standard specification

Up to Basement

Above Basement GF

First Floor

Plastering in C.M 1:3-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete

Plastering in C.M 1:5-12 mm thick with including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats using ready mix enamel paint with including cost and conveyance of all materials and including all labour charges etc complete

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Floor finishing with Antiskid designed colour ceramic tiles 305x305x6mm thick Tiles set in CM 1:3-20mm thick including cost and conveyance of all materials and including all labour cahrges etc complete

Dadooing side walls using designed colour glazed ceramic tiles set in Cm 1;3-20mm thick including cost and conveyance of all materials and including all labour cahrges etc complete

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVCrigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flushwith wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour forPVC concealed light point / fan point (For electronic regulator) SD 25

Supply and fixing of single box type 4 feet 20 W LED fitting with electronic choke and condensor with TW round blocks on wall or ceiling with fl.tube with PVC unsheathed copper leads etc as per SD 87

Supply and fixing of 5A3 pin and 5pin combined flush type wall socket 1ith 5 A flush type switch on suitable TW box SD 133

Supply and fixing of 1200 W AC ceiling fan in the existing clamp with 1 feet down road and lead wire connections etc complet as per SD 110

Supply and fixing of 32 A DB switch of 500 V with metal cladwith fuse and neutral ( side handle ) on suitable TW board with PWD earthing SD 144

Supply and clarnping of 3.5x 16 sq.mm PVC LTUG rmoured LTUG cable on post or on wall with MS Clamps. SD 222

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supportingTW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earthconnection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit as Per SD 125

Supply and providing cable end termination of 3 1/2 x 16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection completeSD 235

Supply and fixing of MS steel door and Windows including cost and conveyance of all materials and fabrication charges and fixing in position etc complete

Door 1.0x2.10 m size

Window 0.9x1.20 m size

Supply and fixing of PVc pannel door including cost and conveyance of all materials and including all labour charges etc complete

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....