REPAIRS TO BOUNDRY WALL , FENCING,RCC JALLI AND OTHER B/R RELATED WORKS UNDER AGE B/R -I (W) OF GE (W) AGRA

Amount

Demolition of brick work masonery built in cement mortar complete all as specifird and directed

M&L of brick work in CM 1:6 using sub class 'B' bricks straight or curved on plan exc 6m mean radius as in man holes, etc complete all as spd and dir.

Ditto but except brick, using old brick incl cleaning of brick, stacking, etc complete all as spd and dir.

M&L for brick work with sub class 'B' bricks,old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as spd and dir.

M&L PCC1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching etc incl necessary form work complete all as specified and directed

M&L 15mm thick cement plastering in cement morter 1:6 on other than fair faces of brick work finsihed even and smooth without using extra cement complete all as spd dir.

M&L 15mm thick cement plastering in cement morter 1:6 on fair faces of brick work finsihed even and smooth without using extra cement complete all as spd dir.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion (Apex) over a coat of primer complete all as spd and dir.

Dismantling of RCC posts or struts of any section , including taking out embedded in concrete portion and making good of post hole to fixing of new posts complete.

All as per item no above but embedded in natural ground.

Dismantling mild steel work of any description all as spd and dir.

M&L PCC 1:4:8 type C2 using 40mm graded crushed stone agg in fdn, filling and mass concrete complete

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc;flat iron fillets(for securing wire mesh etc) including all necessary drilling ,bolting or riveting,etc, and similar works conforming to Fe-410-0 or Fe-310-0.

M&L preparation of new steel surfaces of any description,exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Dismantling chain link fencing wire, any type complete all as spd and dir.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed

Supply only MS Galvanized chain link fencing any size and type complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square head and one end screwed or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut, exc. 5 cm long & diameter of neck 5 to 10mm complete all as specified and directed .

S&F in repair galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed

All as per item no. 20 above but Restraining resecuring including making good staples etc complete all as spd and dir

Taking down one way Trellis work (jafri), including taking as under of battens of trellis (posts and rails measured separately)

Providing precast cement concrete 1:2:4 type B0 (12.5mm stone aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4 including all mouldings complete all as spd and dir.

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Demolition of cement concrete(reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L RCC 1:2:4 type B - 1 (20mm graded stone aggragate) as in Columns, pillars, piers, posts and struts complete

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto as above but 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders

Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc and getting out soft /loose soil .

M & L for Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm competed

M & L for Removing excavated soil n.exc 50m depositing where directed at a level n exc. 1.5 m as directed by Engineer-in-charge

Dismantling of old concertina coil of any dia and S&F concertina coi 450mm dia , number of turns 50,approx weight of coil is 6.25 kgs and coil stretch length is 4-5 mtrs complete all as specified and directed.

Dismantling and Refixing Concertina coil 450 mm dia ,number of turns 50,approx weight of coil is 6.25 kgs and coil stretch length is 4-5 mtrs complete all as specified and directed.

m/s meetu enterprises

VASUNDHARA AND COMPANY

M/S OM Enterprises

R.S BUILDERS

MNR ASSOCIATES

M/s Kanha Enterprise

C P Singh and Co

Messars Maa Devi Construction Co.

VISHESH BUILDERS

N.K. ENTERPRISES

SahaDevSingh Constructions