Mudukulathur SBM2.0 RRP Shed

Amount

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per with standard specifications

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per standard specifications as directed by Engineer incharge.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29m high for plane surfaces such as RCC Slabs,Rectangular beams,Tee (or) ELL beams,Lintels,bed block,slabs,landing beam,canopy side slab,or boxing (or)vertical slabs,rectangular (or) quare(or)round columnsetc.,as detailed below with all cross bracings using M.S Sheets of size 90cmx60cm and B.G 10 Stiffended with welded M.S.Angles of size25mmx25x3mm for boarding laid over silver oak(or)country wood joist of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13 cm dia spaced out 75 cm centre to centre or at suitable intervals etc.,complete complying with std.specification. Centering footing, Plinth & Sill

A)For Plinth beam

B)Centering column & lintel cum Sunshade

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Supplying and fixing of petty in work for truss, including cost of labour charges for wrought and fixing etc.., complete.

Supplying and fixing Galvalium Sheet0.47mm TK roof using ''U" or "J" bolts, nuts, screws, nails and bitumen washers including cost of labour and materials etc., complete complyingg with standard specification as directed by the departmental officers.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

RAMESH KANNAN K (BID ID -1260069)