renovation of Office floor in Water Treatment Plant under NP Jamalpur (Dist-Munger)

BOQ For the Estimate for renovation of Office floor in Water Treatment Plant under NP Jamalpur (Dist-Munger)

S.No. CODE Particulars Unit Qty Rate Amount

1 BCD/ 15.23.1 Demolishing tile work in floors and roofs laid in cement mortar including stacking material within 50m lead for thickness of tiles 10 mm to 25 mm M² 44.35 30.7 1362

2 BCD/15 .2.1 Demolishing cement concrete including disposal of material within 50 metre lead:1:3:6 or richer mix M³ 9.0731 970.9 8809

3 BCD/15 .56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. M² 194.84 21.7 4228

4 BCD/13.11.2 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand) M² 64.288 152.9 9830

5 BCD/ 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. M³ 61.32 360.7 22118

6 BCD/ 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete M³ 47.69 287.3 13701

7 BCD/ 11.72 Providing 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, M² 89.43 283.3 25336

8 BCD/11 .7 Cement concrete pavement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) including finishing complete. M³ 19.01 5418.6 103008

9 BCD/ 11.41.4 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.- do-all complete job as per direction of E/I Size of Tile 100x100 cm M² 82.63 2804.8 231761

10 BCD/ 11.47.3 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 800 x 800 mm. M² 68.34 1799.6 122985

11 BCD/ 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels..-do-all complete job as per direction of E/I M² 75.939 4401.2 334223

12 BCD/8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. M 105 260.1 27311

13 BCD/13.13.1 + 13.36.5 Cement plaster in course sand 20 mm cement plaster of mix ;1:3 (1 cement: 3 coarse sand) m² 130.55 240.4 31384

14 BCD/22 .23.2 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one m² 130.55 311.5 40666

15 BCD/13 .26 CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT m² 130.55 40.5 5287

16 Carriage of Material

i Coarse sand M³ 18.06 1387.8 25064

ii Stone Chips M³ 16.92 1370.8 23194

iii Bricks Nos 2862 867.61 2483

iv Local Sand M³ 49.03 268.35 13157

17 Diff Cost of Material

i Bricks Nos 2862 666.32 1907

Total Rs 1047814

18 Add 5.36% Additional GST 56163

19 Seigniorage Fee

i Coarse Sand M³ 18.06 17.58 317

ii Stone Chips M³ 16.92 59.54 1007

iii Bricks Nos 2862 512.8 1468

iv Local sand M³ 49.03 14.19 696

Total Rs. 1107465