Construction of New OPD at IGMC Shimla SH Providing lighting in land scaping and approach road and covered path therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 6 sq. mm (twin core)

Unarmoured cable 35 sq. mm (3.5 core)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:-

4 Meter long having nominal bore dia. 65 mm planting depth 80 cm with pit depth 95 cm.

Supplying and fixing Twinkle make Classic mild steel pole made out of galvanised mild steel tubewith cast aluminium embellishment. The poles are primer coated & painted with polyurethane paint suitable for single/double/tripple side post top/down luminaires having a service window at bottom comprising 4 way 25 amp connector terminal & MCB including making CC base for base plate embedding bolts for erection of pole as required / directed at site. (Classic Steel-140-75 Q4 embellishment.

Supplying and fixing Twinkle make street light bracket made dia cast aluminium & suitable for ornamental casted poles for mounting of lanterns Cat No. L-bracket and Specline-30/40 (Bracket Single Light) 700mm.

Supplying and fixing LED hanging fixture made of spun aluminium with power LED for glare free lighting with high visual comfort as required / directed at site. (LED hangin fixture 90 watt Cat No. LUX-PT-156H)

Supplying & fixing of aries LED bollards are made of extruded aluminium profiles and die cast alm base with UV protected frosted PMMA diffuser for glare free lighting bollards are painted with PU paint complete in all respect. Cat NO. LUXMAX-TB-LED-1/A(H-800mm)

Providing and installation of following type of Surface / Recess mounting Round / Square type LED Panel Light , powder coated housing made of CRCA sheet, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including making connections, testing and commissioning etc. as required with minimum 2 years warranty. Make: Twinkle, GE, Philips or any other approved by Engineer-in-Charge.

LED Panel Light 36 Watt. ( Size : - 2' x 2' )

LED Panel Light 6 Watt.

Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink,with anti glare polycarbonate diffuser and energy efficient constant integral,electronic driver,suitable for input voltage:AC 220-240 V,50/60Hz,complete with all accessories,including mounting clips & loop in loop out wire,connections,testing and commissioning etc.as required with two years warranty. Make:Philips,GE,Twinkle or any other approved by Engineer-in-Charge.

LED Batten Light 40 W

Providing, laying and fixing of double wall corrugated (DWC) HPDE pipe for underground power cable protection with IS 14930 part II mark on it 50/38.

Supply, installation, testing and commissioning of street light panel outdoor type having MCCB 100A 4P 25 KA TMR with O/L & S/C protection 1 No. spreader terminal MCCB 100A 4P 1 No. phase indication lamps LED type red / yellow, phase indication lamps LED type blue, control MCB 6A SP 10 KA 4 No., power contractor 32A TP 1 NO. auxilary control block 1 No. timer switch analogue type 2 No. auto manual switch 1 No. MCB DP 16A 10KA 5 No. terminal block 25mm 10 No. PVC duct 45X25 2 No.with satisfaction of Engineer-in-Charge at site.

Supplying and fixing LED flood light made of pressure die cast aluminium with toughened glass and available in IP 65 protection as required / directed at site Cat No. LUXMAX -FL-ST-150

SITC for Automatic phase Sequence corector panel with 250 Amp motorized change over switch and 4pole 250 Amp 25KA MCCB with automatic phase sequence relay, Auxiliary relay,time delay relay,indication Led lamp .complete with control wiring ,interconnection with solid aluminium & flexible copper wire & accessories sites,gasket,doorlocks,copper flexible door earth,legend plates etc as required complete in all respects .

Providing and fixing Distribution panel with MCCB 200 amp 4P with 4 no 4pole 63A Mcb and provision for 3 no SPNDB 12 way ,spreader terminal ,phase indication lamps, complete with control wiring ,Fabrications charges etc complete in all respects .

Providing and fixing following rating and breaking capacity MCCB in sheet steel enclosure, complete with making connections, etc. as required.125-160 amp with Size II enclouser .

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.4X25 sqmm

Supplying and fixing 100mmX40mm UPVC Truncking MK make on surface as required complete in all respects.

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 120 sq. mm (3.5 core)

M/s Naresh Elecric Works