PROVN OF CERTAIN SPECIAL REPAIR, REVENUE AND MINOR WORKS AT AGE MFFR UNDER GE (N) BIKANER

Amount

M&L for Surface dressing not exc 15 cm deep in soft/loose soil.complete all as specified and directed by the Engr-in-Charge

M&L for excavation over area n exc. 1.5 m deep and getting out in soft soil complete all as specified and directed by the Engr-in-Charge

M&L for excavation over area exc. 1.5 m but n exc 3 m deep and getting out in soft soil complete all as specified and directed by the Engr-in-Charge

M&L for Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for cable, foundation,casspits,manhole,peirs and getting out of loose soil etc. complete all as specified and directed by the Engr-in-Charge

M&L Providing PCC 1:4:8 type D-2 (40mm graded agg) as in foundations complete all as specified and directed by the Engr-in-Charge

M&L for brick work with Fly Ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by the Engr-in-Charge

M&L for brick work with Sub class-B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 comp all as specified.

M&Lbrick work with Sub class -B bricks in one brick thick honey comb walling for soak well wall in CM 1:4 complete all as specified and directed by the Engr-in-Charge

M&L for hardcore of broken brick or boulders of gauge n exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface.

Taking down cement plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed by the Engr-in-Charge

Dismantling of brick work built in cement mortar including all quions arches pillars etc complete all as specified and directed by the Engr-in-Charge

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in unframed work in any position complete.

Tacking down old rusted and damaged steel window/vent incl. guard bar and grill where exist of size not excl 1.5 sqm each and all as specified

Taking down chowkats or frames with shutter (without taking off shutters from the frame)exc 1.5 sqm but n exc 4 sqm all as specified.

Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engineer -in-charge.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

Returning, filling in including spreading levelling watering well ramming in layers not exc 25 cm each layer in soft/loose soil. complete all as specified and directed by the Engr-in-Charge

Removing excavated material to a distance n exc 150m and depositing where directed at a level n exc 1.5m above the starting point. complete all as specified and directed by the Engr-in-Charge

M&L for hardcore of broken stone or stone boulders of guage n exc. 63mm,deposting,spread and lavelled in layers not exc. 15 cm thick watered and rammed to a true surfaces complete all as specified and directed by the Engr-in-Charge

M&L 50mm thick average local tibba sand cushioning for paver block tiles including Spreading and levelling and well ramming with watering and consolidation required etc. complete all as specified.

Earth filling in floors Spreading, levelling in layers n exc 25cm thick including well ramming and watering as required.

M&L for PCC 1:2:4 type B-2 (40mm graded aggregate) for LT panel foundation complete all as specified and directed by the Engr-in-Charge

M&L for 75mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in sub base of floors complete all as specified and directed by the Engr-in-Charge

M& L for 100 mm thick PCC flooring 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in / subbase of floor finishes complete all specified.

M & L for machine pressed cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with gray cement and pigment complete all as specified & as directed .

Providing 40mm thick damp proofing course 1:2:4 type B-0 including necessary form work including WPC, complete all as specified and directed by the Engr-in-Charge

Providing 20mm thick bearing plaster in CM 1:4 on brick work or cement concrete surface smooth and fair finish surface complete all as specified and directed by the Engr-in-Charge

M&L Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortor 1:6 n.exc 3 m in length complete all as specified

M&L Jodhpur stone roof slabs, self faced 7.5 mm to 10 cm thick, 25 cm to 35 cm wire hoisted and set, joined and grounted in CM 1:3 comp.all as specified.

M&L PCC 1:2:4 type B-1 using 20mm graded stone agg. ,50mm thick as in floors over stone patti roof slab finished the surface even and fair comp.all as specified.

M&L Lime concrete terracing as specified on roof comp.all as specified.

M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)

M&L for polythene film black 150micron

Supply only water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Applying evenly a tack coat of industrial bitumen 85/25 , 1.2kg/sqm incl cleaning surface.

M&L 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L for flush pointing in cement mortar 1:3 on ceiling surfaces of stone patti roofs complete

M&L Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling. comp.all as specified.

M&L Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling comp.all as specified.

M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed by the Engr-in-Charge.

M and L for coloured Glazed ceramic tiles 300X200mmX7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10mm thick cement screed in 1:4. banking coat complete all as specified and directed by the Engr-in-Charge.

M&L 100 mm thick PCC Type B-1 1:3:6 using 20mm graded stone agg. as in PCC for plinth Protection complete all as specified and directed by the Engr-in-Charge.

M&L 20 mm thick machine cut kota stone slab in flooring with 100mm wide white marble stripps etc., laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing and also including rounding off outer exposed edges and also including laying over and including 15mm thick backing coat in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm thick machine cut kota stone slab on vertical surfaces as in skirting/riser of steps etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and also making edges rounded or bull nosed, over and including and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L 19-20 mm thick Granite of any type work table rubbed and polised in steps,jambs,pillars,window cill, cooking plateforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixure of pigments to match with shade of granite comp.all as specified.

M&L Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tybes conforming to IS 1161-1979 complete all as specified and directed by the Engr-in-Charge

MS plates/flates angle,wind ties etc as in cleat gusset incl drilling welding etc complete all as specified and directed by the Engr-in-Charge

M&L for Pre-painted galvatume aluminium zinc coating Gi based corrugated steel sheet 0.5mm thik of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L for Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer.complete all as specified and directed by the Engr-in-Charge

M&L for Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of zinc choromote primer.complete all as specified and directed by the Engr-in-Charge

M&L for hacking out old broken glass in steel or wooden window incl all pins,putty etc all as specified

M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane complete all as specified and directed by the Engr-in-Charge

PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge

PCC 1:2:4 type B-1 using 20mm graded aggregate as in bed blocks of hold fasts etc.

M&L for 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns. complete all as specified and directed by the Engr-in-Charge

M&L Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 2nd class hard wood 35mm glazed and skelton shutter open rebated and prepared to receive glass,gauge etc.(w/o sash bars)edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc.as spcd. Clause 8.20(a) complete all as specified and directed by the Engr-in-Charge

S&F 30mm tk Flush shutters, solid core construction,with block board core or plywood face panels, commercial type on both side complete all as specified and directed by the Engr-in-Charge

S&F hold fast and similar small articles conforming to Fe 410 or Fe 310-0.

S&F Butt hinges mild steel medium weight cold rolled of 100mm long with fixing screwed complete all as specified and directed by the Engr-in-Charge

S&F mild steel barrel tower bolt ,stove enamelled black with bright bolt of 150mm complete all as specified and directed by the Engr-in-Charge

S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl. A minimum of 6bolts and nuts four on bolt plate and two on staple plate of 250mm long. complete all as specified and directed by the Engr-in-Charge

S&F mild steel pressed handles oval type stove enamelled black of 150mm complete all as specified and directed by the Engr-in-Charge

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.

S&F Butt hinges extruded alumonium alloy with galvanised mild steel hinges pin anodisedand fixed ,type B-21 of 100mm.

M&L Aluminium anodised barrel tower bolt of extruded section of 150mm with fixing screw complete all as specified and directed by the Engr-in-Charge

M&L Aluminium handles cast type anodised of 150mm complete all as specified and directed by the Engr-in-Charge

M&L 110mm PVC sanitary connection -for WC connector

S&F Vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern and flush pipe) incl. P or S trap complete all as specified and FIXED IN REPAIR

M&L PVC valve less, symphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets 10litres complete all as specified and directed by the Engr-in-Charge

M&L PVC connection 15mm size with PTMT nuts of length 600mm.

M&L overhead shower with arm 225 mm with flange of cast copper alloy chromium plated

M&L Towel rail 600mm long of cast copper alloy, chromium plated, fixed in repair complete all as specified and directed by Engineer-in-charge.

Cutting opening through brick walls for door , window and other opening or enlarging existing opening,converting window into door opening etc. cutting out deffective brick work for under pinning including providing fixing and removing shoring cleaned and stacking bricks removing surplus servicable brick,hard core etc

M&L for Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg.width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples. complete all as specified and directed by the Engr-in-Charge

M&L for GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge.

M&L for GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20mm complete all as specified.

Cutting existing steel tubing for alteration or addition and screwing existing steel tubing for alteration and addition lenghtening screw to pipe 25 to 32 mm bore complete all as specified and directed by the Engr-in-Charge

M&L PVC floor trap 75mm incl.CP grating .

M&L for Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm bore fancy type chromium plated concealed type complete all as specified and directed by the Engr-in-Charge

M&L for sinks with drainage board made of stainless steel 1.00mm thick sheet for kitchen with plug washer waste pipe , mild steel brackets connecting union over all size915x460mm with bowl size 410x330x160mm but fixed in repair incl removing existing vitreous china sink with fittings.complete all as specified and directed by the Engr-in-Charge

M&L Waste pipe 40 mm for SINK with coupling complete all as specified and directed by the Engr-in-Charge

M&L for bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by the Engr-in-Charge

M&L Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm bore fancy type chromium plated concealed type complete all as specified and directed by the Engr-in-Charge

Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Dimantling water tanks cap exc 250 & n.exc.500ltrs.

Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured with three layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “D”.)

M&L Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm Make : Prayag or equivalent.

M&L Vitreous china wash basin, white flat back, size 580x450 excluding traps waste pipe fixed with brackets fixed in repairs.

M&L Waste pipe 32mm for WHB with coupling fixed in repairs.

S&F in repairs 15mm bore dia pillar taps ,cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

M&L Anodized aluminium snap grid frame work of size 605 x 605 mm for false ceiling including necessary notching. The snap grid shall consist of nodized aluminium main & cross tee of size 35 x 25 x 1.4 mm weighing 0.24 Kg/RM and 25 x 25 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminium angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminium angle of size 35 x 25 x 1.6 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick minral fibre boards in grid fixed as false ceiling grid made of aluminium as per specification all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick cement plaster on fair faces of brick or conc. Surfaces in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and directed by the Engr-in-Charge

M&L Rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces including finished fair and even surfaces complete all as specified. complete all as specified and directed by the Engr-in-Charge

M&L for RCC Precast pillarrs moulded 100 x 100mm x 75cm long complete all as specified and directed by the Engr-in-Charge

M&L Providing cement concrete RCC jalli 35mm thick type B0 1:2:4 using 12.5mm graded aggregate (measured solid) including all mouldings but exc frame complete all as specified and directed by the Engr-in-Charge

M&L Preparation of new plastered or unplastered surfaces of wall and applying two coats of white or tinted cement base paint 1st quality over a coat of primer complete all as directed and specified.

M&L Preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of distemper oil emulsion on walls over a coat of primer including cornices pilasters etc complete all as specified.

M&L preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed by the Engr-in-Charge

M&L preparation of new steel surfaces and applying two coats of synthetical enamel paid over a coat of red oxide complete all as specified and directed by the Engr-in-Charge

Preparation of old plastered or unplastered surface of wall and applying two coats of distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge.

Preparation of old plastered or unplasterd surface of walls and applying two coat of cement base paint (Ist quality) complete all as specified.

Preparing old painted surfaces of steel or steel based materials over 10 cm width or girth of any description & applying one thick coat of synthetic enamel paint complete all as specified.

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0

PVC(SWR) Pipe single socketed in any length with rubber ring joint fixed to wall of 75mm bore

PVC(SWR) bends any radius 75mm bore of Pipe.

S&F vitreous china urinal half stall type white with grating and urinal discharge pipe including connection to flush pipe and out going pipe fixed with screw or suitable arrangement complete all as specified and directed.

Local tibba dry sand cushioning and cover (8 cm thick layer of sand before laying of cable and 15 cm thick layer of sand after laying of cable) for protection of cable, material and labour complete all as specified and as directed by the Engineer-in-Charge.

Protection to cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ burnt-clay bricks having compressing strength not less than 75 kg/Square cm complete all as specified and as directed by the Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning LT XLPE insulated, PVC sheathed armoured heavy duty electric cables LT 1100 volt grades with aluminium stranded conductor passing through pipes, in duct, on poles,in trenches, under road etc complete all as specified and directed of following :- (a) 6 Sqmm 2 Core

(b) 10 Sqmm 2 Core

(c) 16 Sqmm 2 Core

(d) 35 sqmm 3.5 Core

(e) 50 sqmm 3.5 Core

(f) 70 sqmm 3.5 Core

Supply & fixing PVC insulated and weather proof sheathed unarmoured two core alluminum conductor cable 4 sqmm 1100 volt complete all as specified and directed.

Supply & fixing GI pipe light grade of size 15 mm dia for connectiong box to LED light with suitable clamp complete all as specified and directed.

Supply & fixing GI pipe light grade of size 40 mm dia for connectiong box to LED light with suitable clamp complete all as specified and directed.

Supply and fix SMC junction box of size 150 mm x150 mmx100 with 02 no aluminium busbar on porcelain insulator and suitable clamp,nut bolt etc complete all as specified and directed.

Sub main wiring with two single core, multi- stranded PVC FR copper conductor cable 1100 volts grade of size 06 sqmm (nominal area) including single core earth continuity conductor cable of size 4.0 Sqmm PVC FR standed copper conductor cable 1100 Volts grade connected to common earth and drawing into and including PVC casing & capping complete including taking out old sub main wiring with earth wire complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.Device. Make:- Havells :- Cat pt No ENURAPEARLPLUSSL60WLED757SASYTOPC/PHILIPS/CG

M&L GI bracket for street light fittings fabricated with GI tubing suitable dia light grade 1.2 m long for mounting street lights at Ser No. 1 incl painting a cost of aluminium paint over one coat of red oxide primer and bending to angle of 120 fixed in complere incl MS clamp 40 x 5 mm and suitable nut & bolts for fixing the brackets as per dia fittings and pipe.

Supply and fix P17 tempra plug and socket of capacity 32 Amps 3P+E+FP with MCBs complete all as directed. Make :- Legrand/Havells Cat pt No 607871

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 32x6 mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40 mm bore medium grade for protection of earth strip PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate funnel with wire mess, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced and lifting handle on RCC cover with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt, all as shown in electrical plate No. 5 of MES SSR part-I and making test point as specified including excavation & earth work and connecting the earthing to an earthing point/equipment as specified and directed& testing on completion.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 6 mm dia MS bars both ways complete all as specified & directed by Engineer-in-Charge.

Taking down carefully existing unsv baten/ siurface conduit/ concealed conduit aluminium point wiring ( light, fan,bell/buzzer,socket or power) complete including removal of unserviceable fittings such as switches sockets, ceiling roses, pendents, sockets, lamp holders shades, fan regulators, light fittings, bell etc including sunken boxs and removing thr retrieved material from dismantling including making good and distrubed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by Engr-in- charge.

Taking down of unsv DBs/switch fuses/ change over in sheet enclouser complete with MCB, fuses/ grips any capacity after disconnecting all cable and removing from site and making good distrubed surface of wall, floor etc complete all as specified and as directed by Engr-in-Charge.

Material and labour for point wiring complete with nominal area 1.5 sqmm, single core PVC insulated PVC sheathed multistranded copper conductor FLRS cable 1100 volts grade laid/drawn through & including suitable size PVC casing caping with necessory fittings/ accessories fixed on wall /ceiling by means of metalic sleev/dash mounting , fittings like switchs, sockets, fan regulator etc with 3 mm thick plastic laminated sheet top cover concealed/surface (as required)in wall etc and nominal area 1.5 sqmm single core PVC Insulated and PVC unsheathed multistranded copper conductor FRLS cable 1100 volts grade as continuous earth wire to common earth and connecting to earth dolly complete all as specified and as directed by Engr-in-Charge :- (a) One light point/fan/Exhaust fan point controlled by one switch

(b) Point wiring as per item No 134 above but for one 5 Amps switch socket outlet point on same board with other switch.

(c) Point wiring as per item No 134 above but for one 5 Amps switch socket outlet point on an independent board.

-- Ditto-- all as per item No. 134 above but 4.0 Sqmm copper conductor cable for socket outlet 3/6 pin, 15 Amps with 2.5 sqmm copper conductor cable as earth wire complete all as specified and directed.

S&F Switch piano flush type single pole, one way 5 Amps complete all as specified & directed.

S&F for socket outlet 3/ 5 Amps, 5 Pin flush type complete all as specified & directed.

S&F Switch piano flush type single pole, one way 15 Amps complete all as specified & directed.

S&F for socket outlet 15 Amps, 3/5 Pin flush type complete all as specified & directed.

M&L for Ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed by Engr -in- Charge

Supply and fix PVC angle holder with LED bulb of capacity 05 watt complete as specified. Make :- C&S/Havells Cat pt No.LTHPLEDLAMP5W/B22 or equivalent

S & F LED tube light fittings 20W LED 6000K (4 ft.) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic dirver etc, complete with all accessorie of Make:- Havells Cat pt No ENDURALINEARNEOBS20WLED830SPCWH/C&S Cat pt No LTDC01220WLED/WD 20W/or equivalent

S & F LED bulk head made up corrosion resistant unbreakable polycarbonate housing factual impact dust and water resistant luminaries with LED bulb 7 watt etc, complete with all accessorie of Make:- Cat pt No HLPLEDBH10W(CW)/or equivalent

Supply and fixing Exhaust fan 450 mm sweep with louver work and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed.

Supply and fix MCB DBs single pole and neutral 8 way SPN 230 Volt single door complete all as specified and directed.

Supply and fix MCB SPN of capacity 32 Amp 240 Volt complete all as specified and directed.

Supply and fix MCB SP ' C' series of capacity 6-32 Amp 240 Volt complete all as specified and directed.

Supply and fixing Fresh air fan (Exhaust fan) of size 300 mm sweep and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed. Make: - Usha/Bajaj/Havells

Supply and fixing five star Ceiling fan of size 1200 mm sweep 220-240 Volt 50 Hz AC and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed. Make: - Usha/CG/ Havells

Supply and fixing storage water heater type ( Gyser) five star 25 ltrs capacity with aluminium tank complete including grouting nut, bolts 100 mm x 15 mm for hangining the gyser complete. Make :- Havells/Bajaj/CG

S&F PVC connection heavy duty with brass union of required length 450 mm long with PTMT for 15 mm bore GI pipe complete.

Stop valve cromium plated cast copper alloy screwed supply and installed complete for size 15 mm.

Supply and fixing bib tape 15 mm cast copper alloy with crutch and butter fly handle, screwed town screwed screwed for iron pipe or brass ferrule and fixed.

Supply and fix MCB DBs single pole and neutral 4 way SPN 230 Volt single door complete all as specified and directed.

Material and labour for DI pipe cutting up to 200 mm dia for reducing to required length for insertion of new branches, tees, collar, tail pieces etc in position complete all as specified.

Material and labour for DI pipe cutting up to 150 mm dia for reducing to required length for insertion of new branches, tees, collar, tail pieces etc in position complete all as specified.

Supply, install ,testing and commissioning of pump set monobloc type mounted on common base foundation electric motor driven complete with all accessories and comprising of the following. (a) Pump Monobloc set of 600 LPM discharge at 70 metre head directly coupled suitable electric motor, 2900 RPM suitable to work on 3 phase, 415 volts electrical system. Make Kirloskar or equilant in crompton /Jyoti /Mother Platter (b) Pressure gauge 100 mm dia of suitable pressure ranging -01 No (c) Common base foundation for pump set made of ISMC 100 suitable for above pump sets as per manufacturers recommendation. Note :- 1) Foot valve, suction pipe ,delivery pipes ,star delta starter etc will be measured and paid separately under relevant item of work

Supply ,laying, jointing and testing GI tubing medium grade 100 mm bore with all fittings laid in floor trenches etc complete

Supply and fixing of cast iron sluice valve PN 1:6 (ISI marked) confirming to IS: 14846-2000 suitable for 100mm bore pipe with flanged ends, drilled, gun metal spindle & iron wheel handle, CI gate with brass ring, cast iron cap including joints and jointing material i.e nuts, bolts , washers & rubber sheet etc complete all as specified and as directed by Engineer-in-Charge. Make:- Leader/Kirloskar

Supply and jointing, connecting PVC insulated unsheathed copper conductor multi stranded cable 25 Sqmm , 1100 volts grade confirming to IS 694 drawn through and including rigid/flexible PVC conduit of suitable size including connecting up etc all specified and directed.

S & F of fully automatic star delta starter with steel sheet encloser 415 volts , 3 phase , 50 cycle in in LT panel suitable for operating the electric motor of cap 25 HP complete including connecting up all as directed

Supply and fixing in replacement 100mm dia foot valve , ISI marked confirming to IS-14846, flanged and drilled including jointing material such as nuts, bolts, washers and rubber sheet etc all directed by Engr-in-Charge.

Material and labour construction of brick masonary valve pit chamber size 90 X 90X 90cm (Internal dimension) using sub clas 'B' bricks complete earth work etc. PCC (1:5:10) type E-2 using 40mm graded stone aggregate in foundation including necessary Excavation,RFR & removing of surplus soil etc PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in copping on top, internal plaster 10mm thick in cm (1:4) MS sheet cover 3 mm thick in two pieces with locking arrangement and hinging device duly painted with two coats of synthetic enamel paint over a coat of primer red oxide including dismentling of broken or u/s wall pit and removal of all material from site etc.

Supply, install ,testing and commissioning of pressure booster pump set mounted on common base foundation electric motor driven complete with all accessories and comprising of the following. (a) Pump Cap 1.0 HP Tank Cap 25 L Pressure1.5 - 5.0 Bar, 7-45 Mtr Head. Make Kirloskar or equilant in crompton /Jyoti /Mother Platter (b) Common base foundation for pump set made of ISMC 100 suitable for above pump sets as per manufacturers recommendation.

Supply, install ,testing and commissioning of pressure booster pump set mounted on common base foundation electric motor driven complete with all accessories and comprising of the following. (a) Pump Cap 0.5 HP Pressure 1.5 - 5.0 Bar, 6-24 Mtr Head. Make Kirloskar or equilant in crompton /Jyoti /Mother Platter (b) Common base foundation for pump set made of ISMC 100 suitable for above pump sets as per manufacturers recommendation.

Supply and fixing GI pipe medium grade 25 mm bore (ISI marked) laid in trenches/ road crossings/along walls/ path /drain/floors with and including clamps, nuts, bolts, washers,sockets,elbow etc and all necessary arrangement to connect existing branch pipe of any type and size including all necessary fittings required at site and testing complete all as specified and as directed by the Engineer-in-Charge. Note:-. Material and labour for GI pipe cutting up to 25 mm dia for reducing to required length for insertion of new branches is included and not paid separately

Supply & fixing in replacement of Gun metal gate valve with iron wheel head screwed both ends with iron pipe & fixed ISI marked of size 25 mm dia bore including taking out old unserviceable valve any type any size and in any condition complete all as specified & directed.

supply and connecting MCB 63 Amps with three phase terminal box suitable for motor as per sample, any type any size with all necessary arrangement (i.e. cable lugs, nut bolts etc) complete all as required at site.

Cable jointing kit for LT 1100 V cable for straight through end termination (Epoxy), hot shrinkable type joint kit complete with jointing material and accessories suitable for 25 Sqmm to 50 Sqmm 3.5/4 core XLPE armoured aluminium conductor cable including testing after jointing, fixing complete all as specified as directed by Engineer-in-charge.

Ditto all as per srl item No. 173 here in above but 70 to 95 Sqmm complete all as specified as directed by Engineer-in-charge.

Boring of holes under road, pavement, hard standing by manually without damaging of road, including pipe 80/100 mm dia suitable complete all as specified and as directed by the Engineer-in-Charge. (Note; length of pipe to be measured and paid seperately under relavant item)

Supply and fixing GI pipe light grade 50 mm bore (ISI marked) laid in trenches/ road crossings/along walls/ path /drain/floors with and including clamps, nuts, bolts, washers,sockets,elbow etc and all necessary arrangement to connect existing branch pipe of any type and size including all necessary fittings required at site and testing complete all as specified and as directed by the Engineer-in-Charge. (Note:-. excavation , earth work and same work shall be measured and paid separately )

Supply and fixing GI pipe light grade 80 mm bore (ISI marked) laid in trenches/ road crossings/along walls/ path /drain/floors with and including clamps, nuts, bolts, washers,sockets,elbow etc and all necessary arrangement to connect existing branch pipe of any type and size including all necessary fittings required at site and testing complete all as specified and as directed by the Engineer-in-Charge.(Note:-. excavation , earth work and same work shall be measured and paid separately )

GS BUILDERS AND ENGINEERS

VIJAY KUMAR SHARMA

ALPHA ENGINEERING COMPANY