REPAIR TO DRAIN, PRECAST DRAIN COVER, FENCING, RETAINING WALL AND MISC WORK IN THE AOR OF AGE B/R-I AND REPAIR TO HARDSTANDING AT MENDHAR AND REPAIR TO TOILET, COOK HOUSE, JOINERY AT BALNOI AND MANKOTE UNDER GE 881 EWS.

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .

PCC 1:2:4, type B-1 (using 20mm graded aggregate) as in surface channels and drains complete all as specified and directed .

Earth work in excavation by mechanical means (Hydraulic excavator) in kind of soil for foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed .

Demolition and breaking up drain pipes 300mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed .

Reinforced concrete Hume pipe 300 mm bore, class NP3, laid and jointed with collars complete all as specified and directed .

Concrete bed in cement concrete 1:4:8 , Type D-2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm in soft/loose soil complete all as specified and directed .

Preparation of concrete surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Factory made precast drain cover of size length 1000 mm, width 550 to 600 mm and 80 mm thickness of grade M30 with holes / cutting sloted for drain out the rain water as per IS 12592 complete all as specified and directed.

Dry finesand as in cushion to precast concrete interlocking paver block includind ramming & consolidating to required thickness complete all as specified and directed .

80 mm thick factory made chamfered edge interlocking cement concrete paver block of M-40 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

60 mm thick factory made chamfered edge interlocking cement concrete paver block of M-30 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in copings, kneelers, apex stones, bed plates, kerbs, or similar work complete all as specified and directed.

Cement concrete 1:5:10 type E2 (using 40mm graded agg) as in foundation, filling, mass concrete, sub base etc complete all as specified and directed.

10mm thick exterior vetirfied tiles (Dura stone tiles), size of each tile not exceeding 0.36sqm, set and jointed with neat cement slurry and pointed with coloured cement to match laid over and including 20 mm thick screed bed or bedding layer of mortar in CM 1:4. complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specified provided complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including necessary excavation and earth work complete all as specified and directed .

Demolition of stone or brick masonry built in Cement Mortar including all quoins arches ,pillars etc complete all as specified and directed.

Walling of random rubble stone masonry brought up to course well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

All as per itme No 21 but except stone complete all as specified and directed .

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on grenite , trap and basalt stone complete all as specified and directed .

Raised pointing to RR masonry in CM 1:4 complete all as specified and directed .

Boulder filling dry hand packed tightly as in back of wall complete all as specified and directed .

110 mm dia PVC pipe, grade A as in weep holes material packing at the back shall be provided at sutaible horizontal intervals with slope complete all as specified and directed .

Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed.

Rendering 20 mm thick in CM 1:4 on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing ,finshed even and fair with out using extra cement complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Preparation of old wall plastered surface including brooming down or steel wire brushing, scrapping down moulds, moss and efflorescence salts and greasy spots and applying one coat of cement base paint complete all as specified and directed.

Glavanised 2 stranded steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc fixed in repairs complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed .

Excavating in post holes (or similar holes) in hard/ dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed .

Mild steel as in posts and struts, angle horn in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) including all necessary drilling including necessary nut or bolt or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed .

Dismantling fencing wire mess ,any type of fencing etc complete all as specified and directed .

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provission of binding wire complete all as specified and directed .

Supply only chain link MS galvanised fencing any size or typecomplete all as specified and directed .

Framed work such as grills, gratings, steel doors etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165 complete all as specified and directed .

Preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed .

Providing Precast cement concrete Type B1 1:2:4 (12.5mm graded aggregate) louvers and jallies 25mm thick (measured solid),including all mouldings but excluding frame (precast frame shall be measured and paid separately in respective item ) and setting in cement mortar 1:4 ,complete all as specified and directed .

Taking down shutters of any description exc. 1.0Sqm but n.exc 2.0Sqm each and refixing in same opening after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frames) complete all as specified and directed.

Pressed steel frames for doors for size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one coat of shop coat of primer, etc, complete, as specified,supplied and fixed complete all as specified and directed.

Pressed steel frames for doors for size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one coat of shop coat of primer, etc, complete, as specified,supplied and fixed complete all as specified and directed.

35mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered paticle board medium density, wood patilcle board with commercial face veneers complete all as specified and directed.

35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24 (a) complete all as specified and directed.

Preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/type/thickness complete all as specified and directed.

Supply and fix in repair GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/type/thickness complete all as specified and directed.

Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames ) complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing complete all as specified and directed. Make : Rajshree

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Sheet glass pane ordinary quality & glazing with oil putty 3mm thick not exceeding 0.50 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame complete all as specified and directed.

Stainless steel butt hinges 100 mm long fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolt if extruded section 150mm long complete fixed with steel screws complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified and directed.

Aluminium, anodised, handles 150 mm of extruded section and fixed complete all as specified and directed.

300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7mm/ 350x 250x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile, laid over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded aggregate) as in sub of floor/path/hardstanding complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including cement screed bed 15 mm thick in cement mortar 1:4 base complete all as specified and directed.

Vitrified Ceramic tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors including taking up or down old pipes and fittings complete all as specified and directed.

S&F GI tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors including taking up or down old pipes and fittings complete all as specified and directed.

15mm dia Gun-metal, level type gate valves, with lever type, screwed both ends for iron pipe and fixed complete all as specified and directed.

20mm dia Gun-metal, level type gate valves, with lever type, screwed both ends for iron pipe and fixed complete all as specified and directed.

Rotational moulded polyethylene water storage tanks, double layer (Cylindrical vertical with closed threaded top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 500 Ltrs including dismantling existing un serviceable water tank and removing to store complete all as specified and directed.

Rotational moulded polyethylene water storage tanks, double layer (Cylindrical vertical with closed threaded top) hoisted and fixed in position all as spd in SSR Pt-I, capacity in 1000 Ltrs including dismantling existing unserviceable water tank and removing to store complete all as specified and directed.

Tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, long shank fancy type screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms), screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

Supply & fixed in repair, Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and directed.

Stop valves/Angle valves, fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fix complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified and directed.

Virtuous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover and connection to drain (or outgoing pipe) and to flushing pipe, antisyphon pipe etc complete all as specified and directed.

PVC (EWC) seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

Vitreous China bowl urinal (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with & including 60mm long brass screw, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe and waste pipe, (Ist quality) with flat back of size 465x355x265mm white with grating and unions for discharge pipe complete all as specified and directed .

PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.

110 mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in trenches complete all as specified and directed.

PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia complete all as specified and directed.

PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and directed.

75 mm dia bore PVC (SWR) pipes single shocketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screwed including dismatling of old steel sheet in any type complete all as specified and directed

Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screwed ncluding dismatling of old steel sheet complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410-W (Gde E-250) quality B etc complete all as specified and directed.

Preparation of new or previously untreated steel or iron surfaces of any description, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 6mm having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) including taking down old existing ceilng board omplete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

15 mm thick rendering in cement mortar 1:4 on stone masonry or other than fair faces of brick work, surface finished even & smooth without using extra cement complete all as specified and directed.

10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing even and smooth with out using extra cement complete all as specified and as directed.

Preparation of wall surfaces and applying two coats of cement base paint over a coat of Primer complete all as specified and directed.

Preparation of plaster surfaces of wall and applying two coats of OBD over a coat of primer including 3mm wall care putty complete all as specified and directed.

M/S RAHUL GUPTA (BID ID -3461285)

VIKAS ENTERPRISES (BID ID -3461225)

M/SHansrajbuilder (BID ID -3461753)

M/S MAHALUXMI BUILDERS (BID ID -3461842)

R C TRADERS (BID ID -3462010)

M/S IMRAN MAJID (BID ID -3459041)