Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LQualified | ₹10.0 L | L1 | Qualified MSE, MII, Category: ST |
| 2 | L2₹10.1 L+₹14,988 (1.50%)Qualified | ₹10.1 L+₹14,988 (1.50%) | L2 | Qualified MSE, MII, Category: ST |
| 3 | L3₹10.4 L+₹44,980 (4.51%)Qualified | ₹10.4 L+₹44,980 (4.51%) | L3 | Qualified MSE, MII, Category: ST |
| 4 | Disqualified 2358 AGGARSEN NAGAR 3RD SCHEME 2ND FLOOR GANGANAGAR GANGANAGAR SRI GANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | - | - | Disqualified MSE, MII, Category: General |
| 5 | Disqualified | - | - | Disqualified MSE, MII, Category: ST |
Tender Value
Refer Docs
EMD Value
₹29,930
Closing Date
7 Apr 2025, 11:00 amClosed
Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold
Ambuja
Ultratech
ACC
JK
Dalmiya under Job No 2506 Svl PD with OHP as per store list
Stone boulder 9 inch to 12 inch
Coarse Aggregate 40 to 63mm
Coarse sand free from vegetation
Coarse Aggregate 20mm graded
Coarse Aggregate 40mm graded
Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata
Sail
JSW
Water proofing compund conforming to IS 2645-2003 Make- Pidilite
Dr Fixit
Fevicol
PBS Roll 20m Long
Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll
GI binding wire TATA
Sail
JSW
Cement based paint Snowcem Make-Berger
Asian
Nerolac
Slack lime
Painting brush 4 inch ISI Marked
HDPE sand Bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched
weight of the each bag should not be less then 42-45 gms oblique Bag
Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian
Berger
Neroloc
Synthetic paint enamelled OG conforming to IS 5-2004 Make-Asian
Berger
Nerolac
Thinner. Make- Nerolac
Berger
Asian
SRT 2440 x 613 x 180
2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA
SAIL
JSW
SRT 1840 x 613 x 180
2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA
SAIL
JSW
ISMB hot rolled 200x100mm and 4 mtr long Make-TATA
SAIL
JSW
Prefeb mild steel door of size 750x 1800mm double shutter
outer frame made out of ISA 40x 40x6mm and door shutter frame Make-Tata
Sail
JSW as per store list
Loop Holes 780 x 300 mm Make-TATA
SAIL
JSW
Loop Holes 1000 x 300 mm Make-TATA
SAIL
JSW
Loop Holes 1250 x 300 mm Make-TATA
SAIL
JSW
Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make-TATA
SAIL
JSW as per store list att
Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m
Wooden scantling various size
Nails various size
Air terminal single pointed aluminium rod 12mm dia and 300mm long.
Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw.
Aluminium strips 25x3mm.
Galvanised iron strip 32x6mm.
Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal
Tata
Kalinga
Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings
drilled with two nos holes for 6 mm dia near one side.
CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame.
Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make-Presto
Polycab
Finolex.
Charcoal
Salt Bid Details 2/34
7648132
GEM/2025/B/6059870
Two Packet Bid
Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt
45 days
Tawang
Total value wise evaluation
BOQ
10 documents required · 10 mandatory
2 yrs
₹3
40%
₹29,930
15 Mar 2025
15 Mar 2025
7 Apr 2025
AS PER STORE LIST
Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold
Dalmiya under Job No 2506 Svl PD with OHP as per store list
Stone boulder 9 inch to 12 inch
Coarse Aggregate 40 to 63mm
Coarse sand free from vegetation
Coarse Aggregate 20mm graded
Coarse Aggregate 40mm graded
Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part I 1982 Make-Tata
Water proofing compund conforming to IS 2645-2003 Make- Pidilite
PBS Roll 20m Long
Width of 0.9Mtr ISI Marked with Min weight of 34 Kgs oblique Roll
GI binding wire TATA
Cement based paint Snowcem Make-Berger
Painting brush 4 inch ISI Marked
HDPE sand Bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched
weight of the each bag should not be less then 42-45 gms oblique Bag
Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 Make-Asian
Synthetic paint enamelled OG conforming to IS 5-2004 Make-Asian
Thinner. Make- Nerolac
2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA
2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make-TATA
ISMB hot rolled 200x100mm and 4 mtr long Make-TATA
Prefeb mild steel door of size 750x 1800mm double shutter
outer frame made out of ISA 40x 40x6mm and door shutter frame Make-Tata
JSW as per store list
Loop Holes 780 x 300 mm Make-TATA
Loop Holes 1000 x 300 mm Make-TATA
Loop Holes 1250 x 300 mm Make-TATA
Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet Make-TATA
JSW as per store list att
Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m
Wooden scantling various size
Nails various size
Air terminal single pointed aluminium rod 12mm dia and 300mm long.
Testing point terminal block make of Gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw.
Aluminium strips 25x3mm.
Galvanised iron strip 32x6mm.
Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal
Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings
drilled with two nos holes for 6 mm dia near one side.
CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame.
Insulating PVC block 75x75x30mm with insulating clamp nut and bolt Make-Presto
Salt Bid Details 2/34
Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja/Ultratech/ACC/JK/Dalmia)
Stone boulder 9" to 12"
Coarse Aggregate 40 to 63mm
Coarse sand free from vegetation
Coarse Aggregate 20mm graded
Coarse Aggregate 40mm graded
Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW
Water proofing compund conforming to IS 2645-2003 (Make:- Pidilite/Dr Fixit/Fevicol)
PBS Roll (20m Long
Width of 0.9Mtr ) (ISI Marked) with Min weight of 34 Kgs/Roll
GI binding wire (TATA/Sail/JSW)
Cement based paint (Snowcem) Make : Berger/Asian/Nerolac
Painting brush 4" (ISI Marked)
HDPE sand Bags khaki colour of size 30"x15" inside laminated interlocking stiched
weight of the each bag should not be less then 42-45 gms/Bag
Anti corrosive Red Oxide zinc chromate primer conforming to IS- 5-2004 (Make: Asian/Berger/Neroloc)
Synthetic paint enamelled OG conforming to IS 5-2004 (Make : Asian/Berger/Nerolac
Thinner. Make-Nerolac/Berger/Asian
2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:- TATA/SAIL/JSW)
2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA/SAIL/JSW)
ISMB hot rolled 200x100mm and 4 mtr long. Make - TATA/SAIL/JSW
Prefeb mild steel door of size 750x 1800mm double shutter
outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg. Steel shall conform to IS-800 (Make: Tata/Sail/JSW
Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW
Loop Holes 780 x 300 mm (Make:-TATA/SAIL/JSW)
Loop Holes 1000 x 300 mm (Make:-TATA/SAIL/JSW)
Loop Holes 1250 x 300 mm (Make:-TATA/SAIL/JSW)
Ventilator Steel 600x450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with blace sheet of 1.00mm thick hold fast ISA 35x35x6mm and tower bolt 8mm dia 75mm long (Make:-TATA/SAIL/JSW)
Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m
Wooden scantling various size
Nails various size
Air terminal single pointed aluminium rod 12mm dia and 300mm long.
Testing point terminal block make of Gun metal & phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw.
Aluminium strips 25x3mm.
Galvanised iron strip 32x6mm.
Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal/Tata/Kalinga)
Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings
drilled with two nos holes for 6 mm dia near one side.
CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame.
Insulating PVC block 75x75x30mm with insulating clamp nut & bolt (Make- Presto/Polycab/Finolex).
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_7648132.pdf
GEM_BID
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
store_listc_2025-03-15-23-06-59_67db226e0493786e58be7b3b33efcbc5.pdf
BOQ
boq_1_2025-03-15-23-06-59_bf0bc63b176c1ee85603e7f0db3926c7.csv.pdf
BOQ
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .