39/PR/BSPTCL/2026-01

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level.1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 rr,m nominal size)

Centring and shuttering including strutting,propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500-8mm dia.

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand )

Providing and fixing M.S.grill of required pattern in frames of windows etc.with M.S. flats,square or round bars etc. including priming coat with approved steel primer all comlete.(a )Fixed to opening/wooden frames with rawl plugs screws etc.

Painting with aluminum paint of approved brand and manufacture to give an even shade.over new steel work(Two or more coats)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.5sqm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes.Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia Pipes

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing on wall face UPVC (working pressure 4 kgf per sqm) rain water pipes confirming to IS:4985 including jointing with seal etc.(a) 75 mm diameter

Providing and fixing on wall face UPVC (working pressure 4 kgf per sqm) rain water pipes confirming to IS:4985 including jointing with seal etc.(a) 110 mm Diameter

Providing and fixing on wall face UPVC moulded fittings/accessories for UPVC rain water pipes confirming to IS:4985 including jointing with seal etc.75 mm bend

Providing and fixing on wall face UPVC moulded fittings/accessories for UPVC rain water pipes confirming to IS:4985 including jointing with seal etc.75x75x75mm

Providing and fixing on wall face UPVC moulded fittings/accessories for UPVC rain water pipes confirming to IS:4985 including jointing with seal etc.110mm dia Bend

Providing and fixing on wall face UPVC moulded fittings/accessories for UPVC rain water pipes confirming to IS:4985 including jointing with seal etc.110x110x110mm

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

Providing and fixing 4 mm thick ACP for panelling of door & window,w.c as per direction of E/I.

Providing and fixing aluminium work for doors, windows, ventilators and rtitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.15 mm nominal bore

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing S.W. gully trap P type 100x100 mm as per direction of E/I.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providin and fixing Slotted cowl (terminal guard) 100 mm dia as per direction of E/I.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster i/c disposal of rubbish to the dumping ground within 50 m lead

Cement plaster in course sand 12 mm cement plaster of mix 1:6.(1 cement: 6 coarse sand)

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Half brick masonry with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper Primer

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade.New work (two or more coats ) over and including priming coat with cement primer.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:In cement mortar

CARRIAGE OF MATERIALS

Coarse Sand (1 km kat+ 9 km Pucca)

Stone Chips-20 mm (1km+ 20 km Pucca)

Bricks (1km+ 7 km Pucca)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box etc as reouired.Group'A'

Providing and fixing 3/5 pin, 15/16 amps, S/S combined as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X 4 sq. mm + 1 X 4 sq. mm earth wire as per direction of E/I.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25132 amps 240 volts, "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.300 mm sweep

Providing and fixing 12 watt LED lamp as per direction of E/I.

Supplying and fixing of following capacity porcelain fuse Link, rewireable type, 2401415 volts, lSl marked, including drilling holes in board,making connections etc as required.16 amp.

Providing and fixing Pilot lamP for indicator, RYB as per direction of E/I.

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.150 mm X 75 mm X 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin, 15/16 amps socket outlet.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amps switch

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.120 watt

In fig

Seigniorge fee

coarse sand

Agreegate

Description

Providing and fixing Modular Partition-Panels for Half Height 1200 mm High ( Mimimum 63 mm Thk. Frame )Providing & fitting Alluminium Extrusion /CRCA made panel framework with powder coated ( 40 to 50 micron).The Vertical members to be placed maximum @900 mm centre to centre, will be made from 1.5 mm thk. Alluminum /CRCA members which are interconnected with minimum 4 nos inter horizental 1.5 mm thk. Alluminium /CRCA member. The horizontal sections made of 1.5 mm. thk. Alluminium /CRCA section. Panels made of 8mm / 9 mm to 9.5 mm / 12 mm thk. prelaminatd MDF board to be hanged on both sides. All slots in Vertical & Horizontal are of dimension 100x20 mm and are meant to carry wire. Two box type powder coated CRCA/Alluminium raceway skirting (128 mm / 146.5 mm / 85 mm wide) to be provided, one at the bottom of the partition and other will be either below the table top or over the table top with wire management system fabricated out of sheet of 0.8 mm mm thk. with appropriate powder coating (40 to 50 micron). All exposed portion will be covered with Allumium /CRCA trims of 1.5 mm Thk. are provided on top & free end of sides.All caps should be Alluminium /CRCA casting . Finish : Prelam / Soft Board / Fabric / White Board / Single Glass / Glass on both sides. Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for Medium Height 1650 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing Medium height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 200○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width.Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for FULL Height 2700 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing full height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 200○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width. Make & direction as per approval given by E/I.

Providing and fixing Modular GLASS DOOR 900mmx2100 mmModular Glass Door: Providing and fixing 12 mm thick frameless toughened glass (IS-2835).door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes, Door handle (Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality) ,locking arrangement and stopper etc. for fixing required door fittings, all complete as per direction of Engineer-in charge. All floors & roof. The rate shall include all design, any support (if required) above false ceiling for fixing the partition, Engineering, 3d view and shop drawing (cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. The above item should be as per specification and sample approved by client. All hardware fittings are stainless steel 304grade. Above item complete in all respect. All floors & roof.Make & direction as per approval given by E/I.

Providing & Fixing of Numen Main Table of Size 2100 x 900x 750mm htSystem : Numen Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated CLOSED TRIA LEG. Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Numen Combo storage with top chamfer handles, open shelf & numerical lock of size 1800x450x685mm Electrical : Access flap 450W with electrical through Side storage. 18mm thk prelam 3 drawer pedestal on castors with TOP CHAMFER handles of size 400x450x621mm.Make & direction as per approval given by E/I.

Table Size:2100X900X750MM. HT.

NUMEN BACK UNIT: 1800 X 450 X450 HT MM

Providing League Plus table of size 1800 x 900 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. 3 DRAWER PEDESTAL: 400X450X621 HT MM WITH LEVELER.Make & direction as per approval given by E/I. Table Size:1800X900X727MM. HT./Side Unit:9 00x450x727 MM HT. WITH PEDESTAL

Providing League Plus table of size 1500 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.Table Size:1500X7500X727MM. HT./Side Unit:900 x450x727 MM HT.WITH PEDESTAL

Providing League Plus table of size 1350 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 750x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.Table Size:1350X750X727MM. HT./Side Unit:750 x450x727 MM HT. WITH PEDESTAL

Providing MEETING TABLE OF SIZE: 5250 X 1200 X727 HT MM MEETING TABLE: Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. derstructure:25 mm Thk. Prelam gable end With Flat Edge PVC Lipping & PLPB Modesty at the front. Electrical :450 MM. Access Flap with PVC side on the table top & vertical duct for vertically wire pulling from JB to switch mounting box.Make & direction as per approval given by E/I.

Providing MEETING ROOM CHAIR: MID BACK CHAIRS: SFF Mid back Revolving Chairs, Seat made of Cushion with Fabric upholstry and Back with Breathable Mesh covered with Synchronised Tilt mechanism with 1D Ajustable Armrest. Nylone Base and Twin Castors. Make & direction as per approval given by E/I.

Providing WORKSTATIONS. OF SIZE: 1200X600X1200HT mm EACH FOR FOUR PERSON CLUSTERS OVERALL SIZE: 4860 X 600 X1200 HT MM.Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping.Understructure:25 mm Thk. Prelam Gable end With Flat Edge PVC Lipping Electrical : Switch Plate Above Worktop & skirting level. Panel (Finish) Bottom Tile :PLPB Tiles. Panel (Finish) Top Tile : Magnetic, MDF Marker Panel/Return Panel : 30 mm thk & 1200 mm ht. Trims : Aluminium Flat Trims. Mobile 3 Drawer Pedestal 400W x 450D x 621H mm wt castors Metal KBPT AND CPUT TROLLY.Make & direction as per approval given by E/I.

Providing Table of size: 1200 x600x750 MM HT Table top made of 25 MM thik PLPB panel rested on 25 MM gable end and 18 MM modesty panel. Having 3D of size: 400x540x450mm HT attached in one side. Carcass : 18mm Prelam Partical Board With PVC Lipping. Fasia : 18mm Prelam Partical Board With PVC Lipping. Handle : D-Handle.Make & direction as per approval given by E/I.

Providing Prelam Modular Storage 900 x 450x1200mm TOP : 18 MM thk. prelam board with PVC Edge band to all Exposed Area. CARCASS & SHUTTER : 18 MM thk. prelam board with PVC Edge band With openable Shutter. BACK : 18 MM thk. prelam with PVC Edge band. LOCK : KEY lock PVC FLUSH handles.Make & direction as per approval given by E/I.

Providing High Back chair with Head Rest. Made with Cushion Seat and Mesh back with protected PP Frame structure. Synchro tilt mechanism, with multi point locking mecanism, with 3 D Armrest adjustable armrest and adjustable lumber support Nylone Base and twin Castors. Over all dimesion of Chair: 1080-1165 HT x 650-700 W x 650 Depth. Seat Dimension: 450-535 HT x 500 W x 520 Depth and Head Rest: 155 HT x 275 D. BIFMA ANSI , Greengaurd (UL) Certified.Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIRS: High back chair with cushion seat and mesh back with PU frame structure adjustable lumber support with 3 D armrest, nylon base and castors. Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIRS: High back chairs seat made of HD Foam with fabric upholstry and high quality Mesh Back. With Lumber Support and Head Rest with comfortable pad. Synchronised Tilt Mechanism, with Tension and height adjustment. Make & direction as per approval given by E/I.

Providing MID BACK CHAIR: Mid Back Chair having Black Mesh Back, Seat Black Fabric, Synchro Tilt Machanism, Adjustable Lumbar Support, Fixed T Type armrest with Polypropylene Pad, With Nylone Base and 5 nos of twin castors.Make & direction as per approval given by E/I.

Providing FIXED VISITOR CHAIR: gale fixed visitor chair with cushion seat with black fabric and mesh back mid back, fixed t type armrest with metal cantilever frame structure duly powder coated.Make & direction as per approval given by E/I.

Providing Trent 3 seater sofa : Sofa Made of HD Foam Seat and Back with premium quality leteritte upholstry with under wooden frame structure with metal leg .Make & direction as per approval given by E/I.

Providing CENTRE TABLE OF SIZE: 1200X600.Make & direction as per approval given by E/I.

Supplying installation,testing & commisoning of 02 ton capacity of spit type invertor air condisoner for offices with stablizer.Make & direction as per approval given by E/I.

DESCRIPTION

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All Kinds of soil

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)

12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level.1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 rr,m nominal size)

Centring and shuttering including strutting,propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete.

Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500-8mm dia.150 mm c/c

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand )

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.

Painting with aluminum paint of approved brand and manufacture to give an even shade.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.5sqm.Granite of any colour and shade

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes.Internal work - Exposed on wall

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing on wall face UPVC (working pressure 4 kgf per sqm) rain water pipes confirming to IS:4985 including jointing with seal etc.(a) 110mm dia

Providing and fixing on wall face UPVC moulded fittings/accessories for UPVC rain water pipes confirming to IS:4985 including jointing with seal etc.

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

Providing and fixing 4 mm thick ACP for panelling of door & window,w.c as per direction of E/I.

Providing and fixing aluminium work for doors, windows, ventilators and rtitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.15 mm nominal bore

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing S.W. gully trap P type 100x100 mm as per direction of E/I.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm

Providing and fixing Slotted cowl (terminal guard) 100 mm dia as per direction of E/I.

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Dismantling old plaster or skirting raking out joints & cleaning the surface for plaster i/c disposal of rubbish to the dumping ground within 50 m lead

Cement plaster in course sand 12 mm cement plaster of mix 1:6.(1 cement: 6 coarse sand)

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Half brick masonry with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse send)

Extra for half Brick masonry in superstructure above pinth level upto floor V level.

Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper Primer

Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade.New work (two or more coats ) over and including priming coat with cement primer.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:In cement mortar

MATERIALS STATEMENT

Total Qty.

Brick Work (1:6)

Half Brick Work (1:4)

Floor tiles

Wall tiles

18mm Granite

DESCRIPTION

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box etc as reouired.Group'A'

Providing and fixing 3/5 pin, 15/16 amps, S/S combined as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X 4 sq. mm + 1 X 4 sq. mm earth wire as per direction of E/I.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25132 amps 240 volts, "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.300 mm sweep

Providing and fixing 12 watt LED lamp as per direction of E/I.

Supplying and fixing of following capacity porcelain fuse Link, rewireable type, 2401415 volts, lSl marked, including drilling holes in board,making connections etc as required.16 amp.

Providing and fixing Pilot lamP for indicator, RYB as per direction of E/I.

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.150 mm X 75 mm X 60 mm deep.150 mm X 75 mm X 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amps switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin, 15/16 amps socket outlet

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.120 watt

DESCRIPTION

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box etc as reouired.Group'A'

Providing and fixing 3/5 pin, 15/16 amps, S/S combined as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire as per direction of E/I.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X 4 sq. mm + 1 X 4 sq. mm earth wire as per direction of E/I.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25132 amps 240 volts, "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.300 mm sweep

Providing and fixing 12 watt LED lamp as per direction of E/I.

Supplying and fixing of following capacity porcelain fuse Link, rewireable type, 2401415 volts, lSl marked, including drilling holes in board,making connections etc as required.16 amp.

Providing and fixing Pilot lamP for indicator, RYB as per direction of E/I.

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep

Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.150 mm X 75 mm X 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin, 15/16 amps socket outlet.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amps switch

Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.120 watt

Particulars

Civil Works

Electrical Works

Partition Furniture & Lift Works

DESCRIPTION

Providing and fixing Modular Partition-Panels for Half Height 1200 mm High ( Mimimum 63 mm Thk. Frame )Providing & fitting Alluminium Extrusion /CRCA made panel framework with powder coated ( 40 to 50 micron).The Vertical members to be placed maximum @900 mm centre to centre, will be made from 1.5 mm thk. Alluminum /CRCA members which are interconnected with minimum 4 nos inter horizental 1.5 mm thk. Alluminium /CRCA member. The horizontal sections made of 1.5 mm. thk. Alluminium /CRCA section. Panels made of 8mm / 9 mm to 9.5 mm / 12 mm thk. prelaminatd MDF board to be hanged on both sides. All slots in Vertical & Horizontal are of dimension 100x20 mm and are meant to carry wire. Two box type powder coated CRCA/Alluminium raceway skirting (128 mm / 146.5 mm / 85 mm wide) to be provided, one at the bottom of the partition and other will be either below the table top or over the table top with wire management system fabricated out of sheet of 0.8 mm mm thk. with appropriate powder coating (40 to 50 micron). All exposed portion will be covered with Allumium /CRCA trims of 1.5 mm Thk. are provided on top & free end of sides.All caps should be Alluminium /CRCA casting . Finish : Prelam / Soft Board / Fabric / White Board / Single Glass / Glass on both sides. Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for Medium Height 1650 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing Medium height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 2O○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width.Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for FULL Height 2700 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing full height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 200○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width. Make & direction as per approval given by E/I.

Providing and fixing Modular GLASS DOOR 900mmx2100 mmModular Glass Door: Providing and fixing 12 mm thick frameless toughened glass (IS-2835).door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes, Door handle (Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality) ,locking arrangement and stopper etc. for fixing required door fittings, all complete as per direction of Engineer-in charge. All floors & roof. The rate shall include all design, any support (if required) above false ceiling for fixing the partition, Engineering, 3d view and shop drawing (cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. The above item should be as per specification and sample approved by client. All hardware fittings are stainless steel 304grade. Above item complete in all respect. All floors & roof.Make & direction as per approval given by E/I.

Providing & Fixing of Numen Main Table of Size 2100 x 900x 750mm htSystem : Numen Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated CLOSED TRIA LEG. Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Numen Combo storage with top chamfer handles, open shelf & numerical lock of size 1800x450x685mm Electrical : Access flap 450W with electrical through Side storage. 18mm thk prelam 3 drawer pedestal on castors with TOP CHAMFER handles of size 400x450x621mm.Make & direction as per approval given by E/I.

Table Size:2100X900X750MM. HT.

NUMEN BACK UNIT: 1800 X 450 X450 HT MM

Providing League Plus table of size 1800 x 900 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. 3 DRAWER PEDESTAL: 400X450X621 HT MM WITH LEVELER.Make & direction as per approval given by E/I.

Table Size:1800X900X727MM. HT./Side Unit:9 00x450x727 MM HT. WITH PEDESTAL

Providing League Plus table of size 1500 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.

Table Size:1500X7500X727MM. HT./Side Unit:900 x450x727 MM HT.WITH PEDESTAL

Providing League Plus table of size 1350 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 750x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.

Table Size:1350X750X727MM. HT./Side Unit:750 x450x727 MM HT. WITH PEDESTAL

Providing MEETING TABLE OF SIZE: 5250 X 1200 X727 HT MM MEETING TABLE: Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. derstructure:25 mm Thk. Prelam gable end With Flat Edge PVC Lipping & PLPB Modesty at the front. Electrical :450 MM. Access Flap with PVC side on the table top & vertical duct for vertically wire pulling from JB to switch mounting box.Make & direction as per approval given by E/I.

Providing MEETING ROOM CHAIR: MID BACK CHAIRS: SFF Mid back Revolving Chairs, Seat made of Cushion with Fabric upholstry and Back with Breathable Mesh covered with Synchronised Tilt mechanism with 1D Ajustable Armrest. Nylone Base and Twin Castors. HNI MAKE MODEL: CERTO.Make & direction as per approval given by E/I.

Providing WORKSTATIONS. OF SIZE: 1200X600X1200HT mm EACH FOR FOUR PERSON CLUSTERS OVERALL SIZE: 4860 X 600 X1200 HT MM.Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping.Understructure:25 mm Thk. Prelam Gable end With Flat Edge PVC Lipping Electrical : Switch Plate Above Worktop & skirting level. Panel (Finish) Bottom Tile :PLPB Tiles. Panel (Finish) Top Tile : Magnetic, MDF Marker Panel/Return Panel : 30 mm thk & 1200 mm ht. Trims : Aluminium Flat Trims. Mobile 3 Drawer Pedestal 400W x 450D x 621H mm wt castors Metal KBPT AND CPUT TROLLY.Make & direction as per approval given by E/I.

Providing HNI Winner Table of size: 1200 x600x750 MM HT Table top made of 25 MM thik PLPB panel rested on 25 MM gable end and 18 MM modesty panel. Having 3D of size: 400x540x450mm HT attached in one side. Carcass : 18mm Prelam Partical Board With PVC Lipping. Fasia : 18mm Prelam Partical Board With PVC Lipping. Handle : D-Handle.Make & direction as per approval given by E/I.

Providing Prelam Modular Storage 900 x 450x1200mm TOP : 18 MM thk. prelam board with PVC Edge band to all Exposed Area. CARCASS & SHUTTER : 18 MM thk. prelam board with PVC Edge band With openable Shutter. BACK : 18 MM thk. prelam with PVC Edge band. LOCK : KEY lock PVC FLUSH handles.Make & direction as per approval given by E/I.

Providing HNI Fluence High Back chair with Head Rest. Made with Cushion Seat and Mesh back with protected PP Frame structure. Synchro tilt mechanism, with multi point locking mecanism, with 3 D Armrest adjustable armrest and adjustable lumber support Nylone Base and twin Castors. Over all dimesion of Chair: 1080-1165 HT x 650-700 W x 650 Depth. Seat Dimension: 450-535 HT x 500 W x 520 Depth and Head Rest: 155 HT x 275 D. BIFMA ANSI , Greengaurd (UL) Certified.Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIR: QUIP HIGH BACK CHIR WITH CUSHION SEAT AND MESH BACK WITH PU FRAME STRUCTURE ADJUSTABLE LUMBER SUPPORT WITH 3 D ARMREST, NYLONE BASE AND CASOTS. HNI MODEL: QUIP.Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIRS: SFF High back chairs seat made of HD Foam with fabric upholstry and high quality Mesh Back. With Lumber Support and Head Rest with comfortable pad. Synchronised Tilt Mechanism, with Tension and height adjustment. HNI MODEL: GALE HB.Make & direction as per approval given by E/I.

Providing MID BACK CHAIR: Mid Back Chair having Black Mesh Back, Seat Black Fabric, Synchro Tilt Machanism, Adjustable Lumbar Support, Fixed T Type armrest with Polypropylene Pad, With Nylone Base and 5 nos of twin castors.Make & direction as per approval given by E/I.

Providing FIXED VISITOR CHAIR: GALE FIXED VISITOR CHAIR WITH CUSHION SEAT WITH BLACK FABRIC AND MESH BACK MID BACK, FIXED T TYPE ARMREST WITH METAL CANTILEVER FRAME STRUCTURE DULY POWDER COATED.Make & direction as per approval given by E/I.

Providing Trent 3 seater sofa :HNI Sofa Made of HD Foam Seat and Back with premium quality leteritte upholstry with under wooden frame structure with metal leg .Make & direction as per approval given by E/I.

Providing CENTRE TABLE OF SIZE: 1200X600.Make & direction as per approval given by E/I.

Supplying installation,testing & commisoning of 02 ton capacity of spit type invertor air condisoner for offices with stablizer.Make & direction as per approval given by E/I.

DESCRIPTION

Providing and fixing Modular Partition-Panels for Half Height 1200 mm High ( Mimimum 63 mm Thk. Frame )Providing & fitting Alluminium Extrusion /CRCA made panel framework with powder coated ( 40 to 50 micron).The Vertical members to be placed maximum @900 mm centre to centre, will be made from 1.5 mm thk. Alluminum /CRCA members which are interconnected with minimum 4 nos inter horizental 1.5 mm thk. Alluminium /CRCA member. The horizontal sections made of 1.5 mm. thk. Alluminium /CRCA section. Panels made of 8mm / 9 mm to 9.5 mm / 12 mm thk. prelaminatd MDF board to be hanged on both sides. All slots in Vertical & Horizontal are of dimension 100x20 mm and are meant to carry wire. Two box type powder coated CRCA/Alluminium raceway skirting (128 mm / 146.5 mm / 85 mm wide) to be provided, one at the bottom of the partition and other will be either below the table top or over the table top with wire management system fabricated out of sheet of 0.8 mm mm thk. with appropriate powder coating (40 to 50 micron). All exposed portion will be covered with Allumium /CRCA trims of 1.5 mm Thk. are provided on top & free end of sides.All caps should be Alluminium /CRCA casting . Finish : Prelam / Soft Board / Fabric / White Board / Single Glass / Glass on both sides. Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for Medium Height 1650 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing Medium height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 200○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width.Make & direction as per approval given by E/I.

Providing and fixing Modular Partition-Panels for FULL Height 2700 mm High ( Mimimum 80 mm Thk. Frame )Providing & Fixing full height tile Based Partition System of overall thickness 80mm having framework of aluminium extrusions covered with snap fitted tiles on both sides. Partition system provides option of various kinds of tiles like prelaminated board tiles, fabric tiles & white marker tiles & Glass Tiles. All metallic parts undergo a 7 stage antirust treatment and are powder coated in matt finish to a thickness of 40-60 microns. The modular partitions are independent and grouted in the floors. The modular partitions are an assembly of the following parts:- FRAME - Frame forms the basic support structure for all other components. The main vertical member of the frame bearing all the load is made of min 1.5 mm thick aluminium extrusions and the horizontal members are made of min 1.5mm aluminium extrusions. The Top & bottom module are mounted over a skirting of 80mm height. The thickness of the top will be min 1.00mm. POST - The frames are connected at the junctions by aluminium connectors/posts. The posts are made of aluminium extrusions of min 1.0mm thickness.GROOVE COVERS - The vertical gaps between the tiles shall be properly and uniformely maintained and shall be vertically covered by fixing specially extruded aluminium section to maintain uniform groove on both the sides of the partition. TILES - The partition tiles shall be provided in Pre Laminated Prelaminated MDF Board/ Fabric on Softboard/White Marker Laminate / Magnetic / Glass Finsih. The Prelaminated Particle Board & MDF Board tile are provided in 6 mm Prelaminated MDF Board with decorative laminate on top and white balancing on unexposed face, having all exposed edges sealed with PVC edge banding tape, pressed at 200○ C with holt melt glue. The Marker Tiles are made up of 6mm particle board pasted with 1mm white marker laminate, on the the exposed face having all exposed edges sealed with PVC edge banding tape, pressed at 180o C with hot melt glue on special edge banding machine. Panel Fixxing Clip -The exposed vertical and horizontal faces of the Panel Clip are Push fitted. The trims are made of aluminum extrusions of 1.0mm thickness and min 10.0mm width. Make & direction as per approval given by E/I.

Providing and fixing Modular GLASS DOOR 900mmx2100 mmModular Glass Door: Providing and fixing 12 mm thick frameless toughened glass (IS-2835).door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes, Door handle (Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality) ,locking arrangement and stopper etc. for fixing required door fittings, all complete as per direction of Engineer-in charge. All floors & roof. The rate shall include all design, any support (if required) above false ceiling for fixing the partition, Engineering, 3d view and shop drawing (cad & hard copy) including approval from client, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. The above item should be as per specification and sample approved by client. All hardware fittings are stainless steel 304grade. Above item complete in all respect. All floors & roof.Make & direction as per approval given by E/I.

Providing & Fixing of Numen Main Table of Size 2100 x 900x 750mm htSystem : Numen Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated CLOSED TRIA LEG. Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Numen Combo storage with top chamfer handles, open shelf & numerical lock of size 1800x450x685mm Electrical : Access flap 450W with electrical through Side storage. 18mm thk prelam 3 drawer pedestal on castors with TOP CHAMFER handles of size 400x450x621mm.Make & direction as per approval given by E/I.

Providing League Plus table of size 1800 x 900 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. 3 DRAWER PEDESTAL: 400X450X621 HT MM WITH LEVELER.Make & direction as per approval given by E/I.

Providing League Plus table of size 1500 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 900x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.

Providing League Plus table of size 1350 x 750 x 750mm htSystem : League plus Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. Leg : Metal Powder Coated 50x50 square closed leg Front modesty: 18mm thk prelam modesty with flat edge PVC lipping 400ht Side storage: 18mm thk prelam Combo storage with PVC FLUSH handles of size 750x450x750mm Electrical : Access flap 450W with electrical through metal vertical duct. Make & direction as per approval given by E/I.

Providing MEETING TABLE OF SIZE: 5250 X 1200 X727 HT MM MEETING TABLE: Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping. derstructure:25 mm Thk. Prelam gable end With Flat Edge PVC Lipping & PLPB Modesty at the front. Electrical :450 MM. Access Flap with PVC side on the table top & vertical duct for vertically wire pulling from JB to switch mounting box.Make & direction as per approval given by E/I.

Providing MEETING ROOM CHAIR: MID BACK CHAIRS: SFF Mid back Revolving Chairs, Seat made of Cushion with Fabric upholstry and Back with Breathable Mesh covered with Synchronised Tilt mechanism with 1D Ajustable Armrest. Nylone Base and Twin Castors. HNI MAKE MODEL: CERTO.Make & direction as per approval given by E/I.

Providing WORKSTATIONS. OF SIZE: 1200X600X1200HT mm EACH FOR FOUR PERSON CLUSTERS OVERALL SIZE: 4860 X 600 X1200 HT MM.Table top :25 mm Thk. Prelam Table Top With Flat Edge PVC Lipping.Understructure:25 mm Thk. Prelam Gable end With Flat Edge PVC Lipping Electrical : Switch Plate Above Worktop & skirting level. Panel (Finish) Bottom Tile :PLPB Tiles. Panel (Finish) Top Tile : Magnetic, MDF Marker Panel/Return Panel : 30 mm thk & 1200 mm ht. Trims : Aluminium Flat Trims. Mobile 3 Drawer Pedestal 400W x 450D x 621H mm wt castors Metal KBPT AND CPUT TROLLY.Make & direction as per approval given by E/I.

Providing HNI Winner Table of size: 1200 x600x750 MM HT Table top made of 25 MM thik PLPB panel rested on 25 MM gable end and 18 MM modesty panel. Having 3D of size: 400x540x450mm HT attached in one side. Carcass : 18mm Prelam Partical Board With PVC Lipping. Fasia : 18mm Prelam Partical Board With PVC Lipping. Handle : D-Handle.Make & direction as per approval given by E/I.

Providing Prelam Modular Storage 900 x 450x1200mm TOP : 18 MM thk. prelam board with PVC Edge band to all Exposed Area. CARCASS & SHUTTER : 18 MM thk. prelam board with PVC Edge band With openable Shutter. BACK : 18 MM thk. prelam with PVC Edge band. LOCK : KEY lock PVC FLUSH handles.Make & direction as per approval given by E/I.

Providing HNI Fluence High Back chair with Head Rest. Made with Cushion Seat and Mesh back with protected PP Frame structure. Synchro tilt mechanism, with multi point locking mecanism, with 3 D Armrest adjustable armrest and adjustable lumber support Nylone Base and twin Castors. Over all dimesion of Chair: 1080-1165 HT x 650-700 W x 650 Depth. Seat Dimension: 450-535 HT x 500 W x 520 Depth and Head Rest: 155 HT x 275 D. BIFMA ANSI , Greengaurd (UL) Certified.Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIR: QUIP HIGH BACK CHIR WITH CUSHION SEAT AND MESH BACK WITH PU FRAME STRUCTURE ADJUSTABLE LUMBER SUPPORT WITH 3 D ARMREST, NYLONE BASE AND CASOTS. HNI MODEL: QUIP.Make & direction as per approval given by E/I.

Providing HIGH BACK CHAIRS: SFF High back chairs seat made of HD Foam with fabric upholstry and high quality Mesh Back. With Lumber Support and Head Rest with comfortable pad. Synchronised Tilt Mechanism, with Tension and height adjustment. HNI MODEL: GALE HB.Make & direction as per approval given by E/I.

Providing MID BACK CHAIR: Mid Back Chair having Black Mesh Back, Seat Black Fabric, Synchro Tilt Machanism, Adjustable Lumbar Support, Fixed T Type armrest with Polypropylene Pad, With Nylone Base and 5 nos of twin castors.Make & direction as per approval given by E/I.

Providing FIXED VISITOR CHAIR: GALE FIXED VISITOR CHAIR WITH CUSHION SEAT WITH BLACK FABRIC AND MESH BACK MID BACK, FIXED T TYPE ARMREST WITH METAL CANTILEVER FRAME STRUCTURE DULY POWDER COATED.Make & direction as per approval given by E/I.

Providing Trent 3 seater sofa :HNI Sofa Made of HD Foam Seat and Back with premium quality leteritte upholstry with under wooden frame structure with metal leg .Make & direction as per approval given by E/I.

Providing CENTRE TABLE OF SIZE: 1200X600.Make & direction as per approval given by E/I.

Supplying installation,testing & commisoning of 02 ton capacity of spit type invertor air condisoner for offices with stablizer.Make & direction as per approval given by E/I.